Losses of volatile compounds during fermentation

The ability of fermentative CO₂ to blow off the volatile compounds that are synthesized during fermentation has been studied. Model solutions simulating a fermenting must were purged at different CO₂ flow rates and temperatures, and the amount of volatile compounds blown off by the stream of CO₂ was recorded by high-resolution gas chromatography. Data showed that under normal fermenting conditions, fatty acid ethyl esters and some fusel alcohol acetates are blown off the solution at a high rate. The maximum loss rate was observed for ethyl decanoate. The purging speed is doubled when temperature increases from 17 °C to 27 °C. Losses can be interpreted by a linear model and are a function of the compound and the flow rate of CO₂. These models allow us to reconstruct the volatile synthesis vs time functions through graphic calculus and to estimate the proportion of volatile material retained, hydrolysed and purged. Synthesis takes place during the tumultuous period of fermentation together with CO₂ production that blows off the volatile material. Hydrolysis takes place in the last stages of fermentation. In a 10-1 open fermenter, up to 80% of volatile material can be blown off while an average of 10% is retained. Residual esterase activity accounts for about 20% of the total amount of ester synthesized.     

Artificial added mass instabilities in sequential staggered coupling of nonlinear structures and incompressible viscous flows

Within this paper the so-called artificial added mass effect is investigated which is responsible for devastating instabilities within sequentially staggered Fluid-structure Interaction (FSI) simulations where incompressible fluids are considered.A discrete representation of the added mass operator M_A is given and ‘instability conditions’ are evaluated for different temporal discretisation schemes. It is proven that for every sequentially staggered scheme and given spatial discretisation of a problem, a mass ratio between fluid and structural mass density can be found at which the coupled system becomes unstable. The analysis is quite general and does not depend upon the particular spatial discretisation schemes used. However here special attention is given to stabilised finite elements employed on the fluid partition. Numerical investigations further highlight the results.     

Resistivity as a function of composition in the superconducting Nb-Pt A15 phase

The electrical resistivity of the A15 compound Nb_100–x Pt _x (20x28.9) is measured as a function of compositionx from room temperature to the superconducting transition temperatureT _c The residual resistivity ₀ is observed to be nearly independent of composition on the Nb-rich side of stoichiometry, but strongly dependent on the Pt-rich side. A closeT _c correlation with the resistivity sloped/dT at high temperatures and with the electronic specific heat coefficient , which are proportional to the superconducting coupling parameter , is noted. The results can be understood in terms of an order-disorder model.     

Target Score—A Proteomics Data Selection Tool Applied to Esophageal Cancer Identifies GLUT1-Sialyl Tn Glycoforms as Biomarkers of Cancer Aggressiveness

Esophageal cancer (EC) is a life-threatening disease, demanding the discovery of new biomarkers and molecular targets for precision oncology. Aberrantly glycosylated proteins hold tremendous potential towards this objective. In the current study, a series of esophageal squamous cell carcinomas (ESCC) and EC-derived circulating tumor cells (CTCs) were screened by immunoassays for the sialyl-Tn (STn) antigen, a glycan rarely expressed in healthy tissues and widely observed in aggressive gastrointestinal cancers. An ESCC cell model was glycoengineered to express STn and characterized in relation to cell proliferation and invasion in vitro. STn was found to be widely present in ESCC (70% of tumors) and in CTCs in 20% of patients, being associated with general recurrence and reduced survival. Furthermore, STn expression in ESCC cells increased invasion in vitro, while reducing cancer cells proliferation. In parallel, an ESCC mass spectrometry-based proteomics dataset, obtained from the PRIDE database, was comprehensively interrogated for abnormally glycosylated proteins. Data integration with the Target Score, an algorithm developed in-house, pinpointed the glucose transporter type 1 (GLUT1) as a biomarker of poor prognosis. GLUT1-STn glycoproteoforms were latter identified in tumor tissues in patients facing worst prognosis. Furthermore, healthy human tissues analysis suggested that STn glycosylation provided cancer specificity to GLUT1. In conclusion, STn is a biomarker of worst prognosis in EC and GLUT1-STn glycoforms may be used to increase its specificity on the stratification and targeting of aggressive ESCC forms.     

Fabry Disease and the Heart: A Comprehensive Review

Fabry disease (FD) is an X-linked lysosomal storage disorder caused by mutations of the GLA gene that result in a deficiency of the enzymatic activity of α-galactosidase A and consequent accumulation of glycosphingolipids in body fluids and lysosomes of the cells throughout the body. GB3 accumulation occurs in virtually all cardiac cells (cardiomyocytes, conduction system cells, fibroblasts, and endothelial and smooth muscle vascular cells), ultimately leading to ventricular hypertrophy and fibrosis, heart failure, valve disease, angina, dysrhythmias, cardiac conduction abnormalities, and sudden death. Despite available therapies and supportive treatment, cardiac involvement carries a major prognostic impact, representing the main cause of death in FD. In the last years, knowledge has substantially evolved on the pathophysiological mechanisms leading to cardiac damage, the natural history of cardiac manifestations, the late-onset phenotypes with predominant cardiac involvement, the early markers of cardiac damage, the role of multimodality cardiac imaging on the diagnosis, management and follow-up of Fabry patients, and the cardiac efficacy of available therapies. Herein, we provide a comprehensive and integrated review on the cardiac involvement of FD, at the pathophysiological, anatomopathological, laboratory, imaging, and clinical levels, as well as on the diagnosis and management of cardiac manifestations, their supportive treatment, and the cardiac efficacy of specific therapies, such as enzyme replacement therapy and migalastat.     

In vivo aging of gutta‐percha dental cone

Gutta‐percha cone is the most widely used material for root canal filling. The in vivo aging of this cone focus on the degradation of its main organic component, trans‐1,4‐polyisoprene, was studied. Aged cones (25 samples) from 2 to 30 years of root canal filling were extracted from different patients in the occasion of retreatment by mechanical way. The information about the aging time was given by the patients. Gel‐permeation chromatography (GPC) and infrared spectroscopy (FTIR) were the analytical techniques used. Polyisoprene degrades with time of aging, but in a slow process. Decrease in polymer molar mass from 5.7 × 10⁵ to 1.7 × 10⁵ g/mol was observed in polyisoprene from cone after 30 years of root canal filling and inside a noninfected tooth. In tooth with caries and periodontal infection, the decrease in molar mass is higher (4.6 × 10⁴ g/mol in cone with 10 years of aging). The production of carbonyl and hydroxyl groups in the aged material indicates that the process is oxidative, even in closed teeth. In these cases, the oxygen could be provided from tissue fluid. The degradation mechanism is complex and depends on many factors, besides time of root canal filling. The dental problem caused by the aging could be the production and migration of cytotoxic substances to periodontal ligament and the reduction on the canal sealing property due to the polymer weight loss. Both of them could contribute to the root canal treatment failure. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100:4082–4088, 2006     

The effect of grazing intensity and the presence of a forage legume on nitrogen dynamics in Brachiaria pastures in the Atlantic forest region of the south of Bahia, Brazil

It has been shown that with careful grazing management and addition of Pand K, but not N, fertilisers Brachiaria pastures are ableto maintain sustainable live weight gains over many years. However, standardon-farm practice, which generally involves high stocking rates, leads after afew years to pasture decline due mainly to N deficiency for grass regrowth. Togenerate an understanding of the mechanism of pasture decline and possiblemanagement options to mitigate this process, a study was performed in theAtlantic forest region of the south of Bahia state to study the N dynamics inpastures of Brachiaria humidicola subject to threedifferent stocking rates of beef cattle, with and without the presence of theforage legume Desmodium ovalifolium. Despite the fact thatthe C:N ratio of the deposited litter was high (60 to 70) the rate ofdecomposition was very rapid (k –0.07 gg^–1 day^–1) and annual rates of Nturnover through the litter pathway were between 105 and 170 kg Nha^–1 year^–1. In the grass-onlypasturesas stocking rate increased from 2 to 3 head ha^–1, N recycledinthe litter decreased by 11%, but a further increase to 4 headha^–1 decreased N recycling by 30% suggesting thatbeyonda certain critical level higher grazing stocking rates would lead to pasturedecline if there was no N addition. High stocking rates decreased theproportionof the legume in the sward, but at all rates the concentration of N in both thegreen and dead grass in the forage on offer and in the litter was higher in themixed sward. The presence of the legume caused a decrease in the C:N ratio ofthe microbial biomass while both soil N mineralisation and nitrificationincreased. This increased rate of turnover of the microbial biomass and thecontribution of N₂ fixation to the legume resulted in largeincreasesin the N recycled via litter deposition ranging from 42 to 155 kg Nha^–1 year^–1.     

Comparative electrochemical studies of zinc chromate and zinc phosphate as corrosion inhibitors for zinc

The anticorrosive performance of two inhibitive pigments, zinc chromate and zinc phosphate, was compared using electrochemical impedance spectroscopy (EIS) and the scanning vibrating electrode technique (SVET) in pigment extracts in 0.1 M NaCl. It was observed that zinc was protected from corrosion in both extracts. In tests using hot dip galvanised steel painted with an epoxy primer incorporating the pigments, the SVET detected the anodic and cathodic distribution along the scribes, although no significant differences were observed among the various primers. On the contrary, EIS was able to distinguish processes occurring on the metal surface exposed by the scribe in different samples. For primers with anticorrosive pigment, a time constant at high frequencies was attributed to a layer of protective nature, probably formed by metal ions from the substrate and inhibitive ions leached from the anticorrosive pigments.     

A Distributed O(1)-Approximation Algorithm for the Uniform Facility Location Problem

We investigate a metric facility location problem in a distributed setting. In this problem, we assume that each point is a client as well as a potential location for a facility and that the opening costs for the facilities and the demands of the clients are uniform. The goal is to open a subset of the input points as facilities such that the accumulated cost for the whole point set, consisting of the opening costs for the facilities and the connection costs for the clients, is minimized. We present a randomized distributed algorithm that computes in expectation an ${\mathcal {O}}(1)$ -approximate solution to the metric facility location problem described above. Our algorithm works in a synchronous message passing model, where each point is an autonomous computational entity that has its own local memory and that communicates with the other entities by message passing. We assume that each entity knows the distance to all the other entities, but does not know any of the other pairwise distances. Our algorithm uses three rounds of all-to-all communication with message sizes bounded to $\mathcal{O}(\log(n))$ bits, where n is the number of input points. We extend our distributed algorithm to constant powers of metric spaces. For a metric exponent ?≥1, we obtain a randomized ${\mathcal {O}}(1)$ -approximation algorithm that uses three rounds of all-to-all communication with message sizes bounded to $\mathcal{O}(\log(n))$ bits.