Monomolecular and Bimolecular Recombination of Electron–Hole Pairs at the Interface of a Bilayer Organic Solar Cell

While it has been argued that field‐dependent geminate pair recombination (GR) is important, this process is often disregarded when analyzing the recombination kinetics in bulk heterojunction organic solar cells (OSCs). To differentiate between the contributions of GR and nongeminate recombination (NGR) the authors study bilayer OSCs using either a PCDTBT‐type polymer layer with a thickness from 14 to 66 nm or a 60 nm thick p‐DTS(FBTTh₂)₂ layer as donor material and C₆₀ as acceptor. The authors measure JV‐characteristics as a function of intensity and charge‐extraction‐by‐linearly‐increasing‐voltage‐type hole mobilities. The experiments have been complemented by Monte Carlo simulations. The authors find that fill factor (FF) decreases with increasing donor layer thickness (L_p) even at the lowest light intensities where geminate recombination dominates. The authors interpret this in terms of thickness dependent back diffusion of holes toward their siblings at the donor–acceptor interface that are already beyond the Langevin capture sphere rather than to charge accumulation at the donor–acceptor interface. This effect is absent in the p‐DTS(FBTTh₂)₂ diode in which the hole mobility is by two orders of magnitude higher. At higher light intensities, NGR occurs as evidenced by the evolution of s‐shape of the JV‐curves and the concomitant additional decrease of the FF with increasing layer thickness.     

Porous Enzymatic Membrane for Nanotextured Glucose Sweat Sensors with High Stability toward Reliable Noninvasive Health Monitoring

Development of reliable glucose sensors for noninvasive monitoring without interruption or limiting users' mobility is highly desirable, especially for diabetes diagnostics, which requires routine/long‐term monitoring. However, their applications are largely limited by the relatively poor stability. Herein, a porous membrane is synthesized for effective enzyme immobilization and it is robustly anchored to the modified nanotextured electrode solid contacts, so as to realize glucose sensors with significantly enhanced sensing stability and mechanical robustness. To the best of our knowledge, this is the first report of utilizing such nanoporous membranes for electrochemical sensor applications, which eliminates enzyme escape and provides a sufficient surface area for molecular/ion diffusion and interactions, thus ensuring the sustainable catalytic activities of the sensors and generating reliable measureable signals during noninvasive monitoring. The as‐assembled nanostructured glucose sensors demonstrate reliable long‐term stable monitoring with a minimal response drift for up to 20 h, which delivers a remarkable enhancement. Moreover, they can be integrated into a microfluidic sensing patch for noninvasive sweat glucose monitoring. The as‐synthesized nanostructured glucose sensors with remarkable stability can inspire developments of various enzymatic biosensors for reliable noninvasive composition analysis and their ultimate applications in predictive clinical diagnostics, personalized health‐care monitoring, and chronic diseases management.     

Identification of adequate neurally adjusted ventilatory assist (NAVA) during systematic increases in the NAVA level

Neurally adjusted ventilatory assist (NAVA) delivers airway pressure (P(aw)) in proportion to the electrical activity of the diaphragm (EAdi) using an adjustable proportionality constant (NAVA level, cm·H(2)O/μV). During systematic increases in the NAVA level, feedback-controlled down-regulation of the EAdi results in a characteristic two-phased response in P(aw) and tidal volume (Vt). The transition from the 1st to the 2nd response phase allows identification of adequate unloading of the respiratory muscles with NAVA (NAVA(AL)). We aimed to develop and validate a mathematical algorithm to identify NAVA(AL). P(aw), Vt, and EAdi were recorded while systematically increasing the NAVA level in 19 adult patients. In a multistep approach, inspiratory P(aw) peaks were first identified by dividing the EAdi into inspiratory portions using Gaussian mixture modeling. Two polynomials were then fitted onto the curves of both P(aw) peaks and Vt. The beginning of the P(aw) and Vt plateaus, and thus NAVA(AL), was identified at the minimum of squared polynomial derivative and polynomial fitting errors. A graphical user interface was developed in the Matlab computing environment. Median NAVA(AL) visually estimated by 18 independent physicians was 2.7 (range 0.4 to 5.8) cm·H(2)O/μV and identified by our model was 2.6 (range 0.6 to 5.0) cm·H(2)O/μV. NAVA(AL) identified by our model was below the range of visually estimated NAVA(AL) in two instances and was above in one instance. We conclude that our model identifies NAVA(AL) in most instances with acceptable accuracy for application in clinical routine and research.     

Improving TCP performance over wireless networks at the link layer

We present the transport unaware link improvement protocol (TULIP), which dramatically improves the performance of TCP over lossy wireless links, without competing with or modifying the transport- or network-layer protocols. TULIP is tailored for the half-duplex radio links available with today's commercial radios and provides a MAC acceleration feature applicable to collision-avoidance MAC protocols (e.g., IEEE 802.11) to improve throughput. TULIP's timers rely on a maximum propagation delay over the link, rather than performing a round-trip time estimate of the channel delay. The protocol does not require a base station and keeps no TCP state. TULIP is exceptionally robust when bit error rates are high; it maintains high goodput, i.e., only those packets which are in fact dropped on the wireless link are retransmitted and then only when necessary. The performance of TULIP is compared against the performance of the Snoop protocol (a TCP-aware approach) and TCP without link-level retransmission support. The results of simulation experiments using the actual code of the Snoop protocol show that TULIP achieves higher throughput, lower packet delay, and smaller delay variance. This revised version was published online in June 2006 with corrections to the Cover Date.     

A Gunn-Diode Active Leaky-Wave Frequency Scanning Antenna

A frequency tunable active leaky-wave scanning antenna using Gunn-diode voltage control oscillator (VCO) as source is developed. The frequency tuning controlled by changing either the varactor diode dc bias or the Gunn diode dc bias is demonstrated. The measured scanning angle of active antenna is close to 15 degree as the Gunn VCO frequency tuned from 12.58GHz to 12.98GHz. To excite the first higher order mode of the microstrip leaky-wave antenna is fed asymmetrically. The dominant mode excitation has been successfully suppressed by adding a sequence of covered wire in the middle line of the microstrip leaky wave antenna. This is a prototype of frequency scanning antenna using two terminal device, which can be easily scaled up to millimeter wave frequency region.     

Transient response of premixed methane flames

The response of premixed methane-air flames to transient strain and local variations in equivalence ratio is studied during isolated interactions between a line-vortex pair and a V-flame. The temporal evolution of OH and CH is measured with planar laser-induced fluorescence for N₂-diluted flames with equivalence ratios ranging from 0.8 to 1.2. One-dimensional laminar flame calculations are used to simulate the flame response to unsteady strain and variations in reactant composition. When the reactant composition of the vortex pair and the V-flame are identical, the measurements and predictions show that the peak mole fractions of OH and CH decay monotonically in lean, stoichiometric, and rich flames. We also investigate the effects of a vortex pair with a leaner composition than the V-flame. In a stoichiometric flame, the leaner vortex enhances the decay of both OH and CH. In a rich flame, we observe an abrupt increase in OH-LIF signal and a disappearance of CH-LIF signal that are consistent with a previous experimental investigation. Our results indicate that the previously observed OH burst and CH breakage were caused by a difference in the equivalence ratios of the vortex pair and the main reactant flow. A numerical study shows that N₂ dilution enhances the response of premixed flames to unsteady strain and variations in stoichiometry. Reaction-path and sensitivity analyses indicate that the peak OH and CH mole fractions exhibit significant sensitivity to the main branching reaction, H + O₂ ↔ OH + O. The sensitivity of OH and CH to this and other reactions is enhanced by N₂ dilution. As a result, N₂-diluted flames provide a good test case for studying the reliability of chemical kinetic and transport models.     

CdTe/CdS thin film solar cells grown in substrate configuration

The ability to grow efficient CdTe/CdS solar cells in substrate configuration would not only allow for the use of non‐transparent and flexible substrates but also enable a better control of junction formation. Yet, the problems of barrier formation at the back contact as well as the formation of a p–n junction with reduced recombination losses have to be solved. In this work, CdTe/CdS solar cells in substrate configuration were developed, and the results on different combinations of back contact materials are presented. The Cu content in the electrical back contact was found to be a crucial parameter for the optimal CdCl₂‐treatment procedure. For Cu‐free cells, two activation treatments were applied, whereas Cu‐containing cells were only treated once after the CdTe deposition. A recrystallization behavior of the CdTe layer upon its activation similar to superstrate configuration was found; however, no CdTe–CdS intermixing could be observed when the layers were treated consecutively. Remarkably high V_OC and fill factor of 768 mV and 68.6%, respectively, were achieved using a combination of MoO₃, Te, and Cu as back contact buffer layer resulting in 11.3% conversion efficiency. With a Cu‐free MoO₃/Te buffer material, a V_OC of 733 mV, a fill factor of 62.3%, and an efficiency of 10.0% were obtained. Copyright © 2012 John Wiley & Sons, Ltd.     

CAC-OLSR: Extending OLSR to Provide Admission Control in Wireless Mesh Networks

This work presents an admission control mechanism for multi-hop wireless mesh networks based on the IEEE 802.11 standard and the OLSR routing protocol. This mechanism, called CAC-OLSR, aims at ensuring that traffic flows with quality of service (QoS) requirements, especially voice and video, are only admitted in the mesh network if it has available resources in order to provide flow requirements. In addition, QoS requirements of previously admitted traffic flows cannot be violated. The proposal was evaluated with NS-2 and Evalvid simulations.     

Layer‐by‐Layer All‐Inorganic Quantum‐Dot‐Based LEDs: A Simple Procedure with Robust Performance

A novel all‐inorganic electroluminescent device is demonstrated based on highly luminescent CdTe nanocrystals intercalated within a laminar hydrotalcite‐like structure. The laminar scaffold acts to both support and distribute the CdTe nanocrystals. The device is synthesized using simple wet chemical processes at room temperature in ambient conditions. It has high thermal stability, operating continuously up to 90 °C, and a maximum efficiency at J = 0.12 A cm^?2. The device is targeted at the automotive industry.     

3D printing as a means of learning and communication: The 3Ducation project revisited

This research project explores to what extent the utilization of open-source 3D printers and 3D design software could serve as means of learning and communication. The principles of non-formal education aligned with the concept of constructionism are used to create an experimental educational scenario focused on geocultural tourism for persons with visual impairments. This paper documents our experience and presents our findings from a 25-day long project, which took place in Zagori, northwestern Greece. 11 high school students from Portugal designed and manufactured natural and cultural heritage artifacts carrying messages in the Braille language. The objects were then handed to people with visual impairments with a twofold aim. First, to enable the communication among persons with and without visual impairments; and, second, to empower students to participate in training projects through open educational procedures. We conclude that open educational practices can boost students’ active engagement in educational processes. Finally, 3D printing encourages a meaningful communication among people with and without visual impairments via the tangible exploration of geocultural components.