Exponential Stability of Interval Dynamical Systems with Quadratic Nonlinearity

This article proposes an approach for investigating the exponential stability of a nonlinear interval dynamical system with the nonlinearity of a quadratic type on the basis of the Lyapunov’s direct method. It also constructs an inner estimate of the attraction domain to the origin for the system under consideration.     

Synthesis and aggregate formation of poly(styrenesulfonate)-b-poly(ethylene glycol)-b-poly(styrenesulfonate) triblock copolymers in aqueous solution induced by binding with aluminum ions

Summary  Well-defined water-soluble poly(styrenesulfonate)-b-poly(ethylene glycol)-b- poly(styrenesulfonate) (PSS-b-PEG-b-PSS) triblock copolymers with narrow molecular weight distribution (1.29 < M_w/M_n < 1.36) were synthesized in aqueous solution at 70 ^oC via reversible addition-fragmentation chain transfer (RAFT) polymerization. The complex formed by the PSS-b-PEG-b-PSS triblock copolymer coordinated with aluminum ion was investigated with turbidimetry, dynamic light scattering (DSL), zeta-potential, and transmission electron microscopy (TEM). The aggregation formation was based on the neutralization of the SO₃^- groups in the PSS blocks with Al³⁺ ions. The appearance, size and stability of the PSS-b-PEG-b-PSS/Al³⁺ aggregates were controlled by varying the PSS block length and degree of neutralization (DN). At DN = 0.33, where the PSS-b-PEG-b-PSS copolymer was completely neutralized with Al³⁺, the aggregate size increased with increasing PSS block length. The transition from the shrinking coil of small size to the interchain aggregates of large size was found at DN of about 0.33.     

Modellierung in der Lehre an Hochschulen: Thesen und Erfahrungen

Zusammenfassung  Nicht erst seit Modellierung zum Modewort geworden ist, ist Modellierung ein wichtiges Thema in der Informatikausbildung. Dieser Beitrag beleuchtet in zw?lf Thesen das Warum, Was, Wie viel, Wo, Wann und Wie von Modellierung in der Lehre im Rahmen informatikbezogener Studieng?nge. Die Thesen basieren auf der Erfahrung des Verfassers mit einer seit über zehn Jahren gehaltenen Modellierungsvorlesung an der Universit?t Zürich sowie dem Gedankenaustausch mit anderen Hochschullehrerinnen und -lehrern im Rahmen der GI-Workshopreihe ,,Modellierung“. Zus?tzlich liefert eine Befragung von Absolventinnen und Absolventen an der Universit?t Zürich empirische Evidenz für eine Reihe der Thesen.     

A lower carbon footprint process for production of metals from their oxide sources

This paper will describe the solid oxide membrane (SOM) process as it applies to the energy-efficient and environmentally sound production of magnesium from magnesium oxide. Also, it will describe the challenges encountered while using this process for the production of transition metals like titanium from its higher oxides. Finally, a novel magnesiothermic SOM process will be proposed that can enable production of transition metals from its higher oxides.     

Epitaxial growth of GaN on (0001) Al<Subscript>2</Subscript>O<Subscript>3</Subscript> via solution-cast seed layer formation process using Ga(mDTC)<Subscript>3</Subscript>

This paper reports an alternative method for the growth of GaN epitaxial layer on (0001) Al₂O₃ substrate by hot-wall vapor phase epitaxy technique. Tris (N,N-dimethyldithiocarbamato)-gallium (III), Ga(mDTC)₃ was introduced as a precursor material for the seed layer formation in the growth of GaN. Optimal growth conditions with seed layers formed by the Ga(mDTC)₃ concentration of 0.047 mol/L were identified: Growth temperature was found to be 850 °C, and optimal distance between the reactant outlet and substrate was determined to be 12.5 cm. Characterization results showed that this growth method produce high-crystallinity GaN epitaxial layers at a relatively lower growth temperature compared to the existing growth techniques and simplify the growth process.     

Porosity distribution in highly compressible cake: Experimental and theoretical verification of the dense skin

The rate of filtration and the water content of cake are influenced by the existence of a dense skin in a highly compressible cake. The phenomenon of the dense skin has been rarely studied, and its existence has not been verified experimentally. In this study, the porosity variation in a very compressible cake is measured by using a new experimental apparatus, and with this the existence of dense skin has been established experimentally. ‘Unified theory on solid-liquid separation’, a recently developed theory, is utilized for calculating the porosity variation in a very compressible cake.     

Preliminary irradiation test results from the Yankee Atomic Electric Company reactor vessel test irradiation program

The Yankee Atomic Electric Company test irradiation program was implemented to characterize the irradiation response of representative Yankee Rowe reactor vessel beltline plate materials and to remove uncertainties in the analysis of existing irradiation data on the Yankee Rowe reactor vessel steel. Plate materials each containing 0·24 w/o copper, but different nickel contents at 0·63 w/o and 0·19 w/o, were heat treated to simulate the Yankee vessel heat treatment (austenitized at 982°C (1800°F)) and to simulate Regulatory Guide 1·99 database materials (austenitized at 871°C (1600°F)). These heat treatments produced different microstructures so the effect of microstructure on irradiation damage sensitivity could be tested. Because the nickel content of the test plates varied and the copper level was constant, the effect of nickel on irradiation embrittlement was also tested. Correlation monitor material, HSST-02, was included in the program to benchmark the Ford Nuclear Reactor (University of Michigan Test Reactor) which had never been used before for this type of irradiation program. Materials taken from plate surface locations (versus 1/4T) were included to test whether or not the improved toughness properties of the plate surface layer, resulting from the rapid quench, are maintained after irradiation. If the improved properties are maintained, pressurized thermal shock calculations could utilize this margin. Finally, for one experiment, irradiations were conducted at two irradiation temperatures (260°C and 288°C) to determine the effect of irradiation temperature on embrittlement. The preliminary results of the irradiation program show an average temperature effect of 38°C for a 28°C difference in irradiation temperature. The results suggest that for nickel bearing steels, the superior toughness of plate surface material is maintained after irradiation and for the copper content tested, nickel has little effect on irradiation response. No apparent microstructure effect on irradiation response was noted and the HSST-02 material's response to irradiation was similar to results from power reactor and other test reactor tests, thus qualifying the Ford Test Reactor for irradiation experiments such as those conducted for the Yankee Atomic program.     

Precipitation behavior of σ phase in fusion zone of dissimilar stainless steel welds during multi-pass GTAW process

The purpose of this study is to investigate the precipitation characteristics of σ phase in the fusion zone of stainless steel welds at various welding passes during a tungsten are welding (GTAW) process. The morphology, quantity, and chemical composition of the δ-ferrite and σ phase were analyzed using optical microscopy (OM), a ferritscope (FS), a X-ray diffractometer (XRD), scanning electron microscopy (SEM), an electron probe micro-analyzer (EPMA), and a wavelength dispersive spectrometer (WDS), respectively. Massive δ-ferrite was observed in the fusion zone of the first pass welds during welding of dissimilar stainless steels. The σ phase precipitated at the inner δ-ferrite particles and decreased δ-ferrite content during the third pass welding. The σ and δ phases can be stabilized by Si element, which promoted the phase transformation of σ→ϱ+λ₂ in the fusion zone of the third pass welds. It was found that the σ phase was a Fe−Cr−Si intermetallic compound found in the fusion zone of the third pass welds during multi-pass welding.