Defining Dry Eye from a Clinical Perspective

Over the past decades, the number of patients with dry eye disease (DED) has increased dramatically. The incidence of DED is higher in Asia than in Europe and North America, suggesting the involvement of cultural or racial factors in DED etiology. Although many definitions of DED have been used, discrepancies exist between the various definitions of dry eye disease (DED) used across the globe. This article presents a clinical consensus on the definition of DED, as formulated in four meetings with global DED experts. The proposed new definition is as follows: “Dry eye is a multifactorial disease characterized by a persistently unstable and/or deficient tear film (TF) causing discomfort and/or visual impairment, accompanied by variable degrees of ocular surface epitheliopathy, inflammation and neurosensory abnormalities.” The key criteria for the diagnosis of DED are unstable TF, inflammation, ocular discomfort and visual impairment. This definition also recommends the assessment of ocular surface epitheliopathy and neurosensory abnormalities in each patient with suspected DED. It is easily applicable in clinical practice and should help practitioners diagnose DED consistently. This consensus definition of DED should also help to guide research and clinical trials that, to date, have been hampered by the lack of an established surrogate endpoint.     

Mechanistic investigation and selectivity of the grafting onto C60 of macroradicals prepared by cobalt-mediated radical polymerization

The grafting mechanism of poly(vinyl acetate) macroradicals prepared by cobalt-mediated radical polymerization onto C₆₀ is investigated. The experimental conditions directly impact the nature and stability of the PVAc/C₆₀ adducts. In the presence of residual initiating radicals that can compete with PVAc° macroradicals for addition onto C₆₀, mixtures of PVAc/C₆₀ adducts having between one and eight polymer chains per C₆₀ are formed. PVAc/C₆₀ adducts prepared with low [PVAc]:[C₆₀] ratios may contain weak C₆₀–C₆₀ bonds that further dissociate and account for the instability of the products. The formation of such dimers can be lessened by increasing the temperature from 30 °C to 100 °C. The temperature increase also allows a complete dissociation of the PVAc-Co dormant species into PVAc° macroradicals and an almost quantitative grafting of eight PVAc chains onto C₆₀, leading to well-defined C₆₀(PVAc)₈ octa-adducts. These results might shed new light on the grafting onto C₆₀ of macroradicals prepared by other CRP techniques.     

Association between plasticized starch and polyesters: Processing and performances of injected biodegradable systems

Different formulations of wheat thermoplastic starch (TPS) have been processed with various plasticizer/starch ratios and moisture contents. The biodegradable polyesters tested are polycaprolactone (PCL), polyester amide (PEA), polybutylene succinate adipate (PBSA) and polybutylene adipate co terephtalate (PBAT). TPS and polyesters are melt blended in different proportions by extrusion and then injected to obtain dumbbell specimens. Various properties are evaluated such as the mechanical properties (tensile and impact tests), and the hydrophilic character with contact angle measurements. Additionally, uniaxial shrinkage is evaluated. Results show that the addition of polyester to TPS increases the dimensional post‐injection stability. Blend modulus values are close to the results of the classical rule of mixture. Elongation at break, resilience values and SEM observations seem to give some indications about the compatibility between both polymeric systems. PBAT and PEA present better results than PCL and PBSA. Contact angle measurement show that we have a drastic increase of the hydrophobic character from 10% of polyester in the blend. The different combinations of TPS and polyesters give a wide range of mechanical behavior for compostable materials, to be developed in specific applications.     

Synthesis,Chiral Separation,Absolute Configuration Assignment,and Biological Activity of Enantiomers of Retro‐1 as Potent Inhibitors of Shiga Toxin

The Shiga toxin (Stx) family is composed of related protein toxins produced by the bacteria Shigella dysenteriae and certain pathogenic strains of E. coli. No effective therapies for Stx intoxication have been developed yet. However, inhibitors that act on the intracellular trafficking of these toxins may provide new options for the development of therapeutic strategies. This study reports the synthesis, chromatographic separation, and pharmacological evaluation of the two enantiomers of Retro‐1, a compound active against Stx and other such protein toxins. Retro‐1 works by inhibiting retrograde transport of these toxins inside cells. In vitro experiments proved that the configuration of the stereocenter at position 5 is not crucial for the activity of this compound. X‐ray diffraction data revealed (S)‐Retro‐1 to be slightly more active than (R)‐Retro‐1.     

Extraction of polymer stress–strain behavior in the presence of self‐heating by the use of a simple model for the elastic–plastic deformation

Polymer materials are well known to be sensitive to strain rate and temperature. Self‐heating and friction effects also play an important role in the mechanical response of these materials. Numerous constitutive laws and phenomenological models have been developed to take into account these dependencies. This article proposes a simplified phenomenological model based on a mapping technique for the strain rate and temperature dependence. The effects of friction and adiabatic heating are also analyzed in this work. Relatively good results are obtained compared to experimental results for polypropylene and polychlorotrifluoroethylene. A parametric investigation of the effects of the interfacial equivalent stress (between the specimen and the compressive bars) and the fraction of plastic work converted into heat was performed. This parametric study allowed for a good approximation of these two parameters for the two studied polymers. POLYM. ENG. SCI., 55:2474–2481, 2015. © 2015 Society of Plastics Engineers     

XRD Analysis of the Role of Cesium in Sodium‐Based Geopolymer

The purpose of this work was to study the role of cesium in sodium‐based geopolymer and its thermal stability for nuclear waste management. A series of mixed sodium and cesium geopolymer samples (Na_1?x Cs _x )₂O·Al₂O₃·SiO₂·12H₂O (referred to as (Na_{1? x} Cs _x )‐GP, where x = 0, 0.08, 0.15, 0.42, 1) have been prepared. All geopolymer samples were heated at 1100°C for 24 h. Pollucite (CsAlSi₂O₆) and feldspathoid (CsAlSiO₄) were crystallized from Cs‐GP. Nepheline (NaAlSiO₄) and a small amount of crystallized silica were obtained from Na‐GP. The other geopolymers (Na_{1? x} Cs _x )‐GP (x = 0.08, 0.15, 0.42) led to pollucite and nepheline main phases. Amorphous silica phase was observed in all the geopolymer samples with various amounts. Phase quantification and scanning electron microscope revealed that higher Cs concentrations in Na‐GP tend to decrease the amorphous phase while improving pollucite and nepheline phase quantification. The amorphous geopolymers have also been studied by pair distribution function analysis. Tetrahedral chains formed by T–O bonding (with T = Si, Al) were shown to be more tighten around Cs⁺ than around Na⁺. It led to shorter Cs–T bond than Na–T bond matching the higher solvation property of Na⁺. Furthermore, thermal study analysis pointed out the fact that geopolymer samples (Na_{1? x} Cs _x )‐GP, can be considered as solid solutions.     

Dielectric features of two grades of bi‐oriented isotactic polypropylene

The dielectric properties of two grades of bi‐oriented isotactic polypropylene were studied with a variety of techniques: breakdown field measurements, dielectric spectroscopy, thermally stimulated depolarization currents (Is), and direct‐current (dc) conduction I values. Standard polypropylene (STPP) and high‐crystallinity polypropylene (HCPP) films were investigated. Measurements were carried out over a wide temperature range (?150°C/+125°C). The breakdown fields in both materials showed a very small difference. On the other hand, the dielectric losses and dc conduction I values were significantly lower in HCPP. Both materials showed a decrease in the dielectric loss versus temperature in the range 20–90°C; this is favorable for application in alternating‐current power capacitors. The analysis of the dc I value allowed us to find evidence of two main conduction mechanisms: (1) below 80°C in both materials, a hopping mechanism due to the motion of electrons occurred in the amorphous phase, and (2) above 80°C, ionic conduction occurred in HCPP, and hopping conduction occurred in STPP. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42224.     

Theory of asymmetric organocatalysis of Aldol and related reactions: rationalizations and predictions

Computational studies have led to models to understand some classic and contemporary asymmetric reactions involving organocatalysts. The Hajos-Parrish-Eder-Sauer-Wiechert reaction and intermolecular aldol reactions as well as Mannich reactions and oxyaminations catalyzed by proline and other amino acids, and Diels-Alder reactions catalyzed by MacMillan's chiral amine organocatalysts have been studied with density functional theory. Quantitative predictions for several new catalysts and reactions are provided.     

The effect of aluminum alkyls and BHT‐H on reaction kinetics of silica supported metallocenes and polymer properties in slurry phase ethylene polymerization

In slurry and gas phase catalytic ethylene polymerization processes, aluminum alkyl (AlR₃) compounds are usually present inside the reactor and their role either as co‐catalyst or scavenger is of considerable importance. Silica supported metallocene/methyl aluminoxane (MAO) catalysts show specific interactions with AlR₃ compounds. Therefore, this study shows an attempt to analyze and compare the effect of concentration as well as type of commonly used AlR₃ on slurry phase ethylene homopolymerization kinetics of silica supported (n‐BuCp)₂ZrCl₂/MAO catalyst. The obtained results indicate that the lower the concentration of smaller AlR₃ compounds, the higher the instantaneous catalytic activity. Concerning the polymer particle size distributions, a rise in fines generation has been observed with increasing AlR₃ content inside the reactor. Finally, it has been shown that the addition of 2,6‐di‐tert‐butyl‐4‐methylphenol (a substituted phenol) into the reactor containing AlR₃ reduces the influence of AlR₃ compounds on the reaction kinetics of silica supported metallocene/MAO catalysts. Polyethylene properties remain similar in all the studied scenarios. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45670.