Analysis of Flax Fiber Cell-Wall Non-Cellulosic Polysaccharides Under Different Weather Conditions (Marylin Variety)

The cell-wall composition has been analyzed for 13 batches of flax fibers grown over 3 years under 3 different weather conditions including a ‘normal one, a harsh drought and a rainy weather. It was found that both stresses, drought and excess of rain induced a decrease of uronic acid in the matrix and an increase of the structuring pectins. Besides, a drought led to an increase of hemicellulose polysaccharides (+24%) whereas an excess of rainfall caused a rise in the amount of so-called structuring pectins (+67%). As the fiber’s mechanical properties remained the same over the years, it was assumed that the cell-wall composition was modified to preserve the mechanical role of the fiber in the stem.     

Kinematical performance prediction in multi-axis machining for process planning optimization

This paper deals with a predictive model of kinematical performance in 5-axis milling within the context of high-speed machining. Indeed, 5-axis high-speed milling makes it possible to improve quality and productivity thanks to the degrees of freedom brought by the tool axis orientation. The tool axis orientation can be set efficiently in terms of productivity by considering kinematical constraints resulting from the set machine tool/NC unit. The capacities of each axis as well as NC unit functions can be expressed as limiting constraints. The proposed model relies on each axis displacement in the joint space of the machine tool and predicts the most limiting axis for each trajectory segment. Thus, the calculation of the tool feedrate can be performed, highlighting zones for which the programmed feedrate is not reached. This constitutes as an indicator for trajectory optimization. The efficiency of the model is illustrated through examples. Finally, the model could be used for optimizing process planning.     

Life time test in direct borohydride fuel cell system

The electric performances of direct borohydride fuel cells (DBFCs) are evaluated in terms of power density and life time with respect to the NaBH₄ concentration. A DBFC constituted of an anionic membrane, a 0.6 mg_Pt cm⁻² anode and a commercial non-platinum based cathode led to performances as high as 200 mW cm⁻² at room temperature and with natural convection of air. Electrochemical life time test at 0.55 mA cm⁻² with a 5 M NaBH₄/1 M NaOH solution shows a voltage diminution of 1 mV h⁻¹ and a drastic drop of performances after 250 h. The life time is twice longer with 2 M NaBH₄/1 M NaOH solution (450 h) and the voltage decrease is 0.5 mV h⁻¹. Analyses of the components after life time tests indicate that voltage loss is mainly due to the degradation of the cathode performance. Crystallisation of carbonate and borate is observed at the cathode side, although the anionic membrane displays low permeability to borohydride.     

Real Estate Property Maintenance Optimization Based on Multiobjective Multidimensional Knapsack Problem

The real estate property maintenance problem (REPMP) deals with the problem of the maintenance of real estate property buildings’ components using a limited budget in a limited period to achieve multiple and often conflicting objectives. Maintenance of the components requires a multiannual maintenance action plan optimized simultaneously on different criteria relative to buildings’ maintenance objectives (the quality of service, client satisfaction, regulatory compliance, etc.) while respecting a predetermined budget. This article presents an innovative modeling of REPMP into a multiobjective multidimensional knapsack problem and its optimization using a generalization of the discrete multiobjective particle swarm optimization algorithm and the Pareto optimality. An application of this methodology using data from a real estate property of 22 buildings of a major French company is presented and discussed.     

Study on conductivity and redox stability of iron orthovanadate

FeVO₄ was synthesised by conventional solid state technique. Impedance measurements using a silver electrode were unsuccessful due to a solid state reaction between FeVO₄ and Ag, forming α-AgVO₃ and α-Fe₂O₃ at the interface. Impedance measurements, with a platinum electrode, reaffirmed that FeVO₄ exhibits semiconductor behaviour in air. In a reducing atmosphere, 5% H₂/Ar, high electronic conductivity, from 1 S cm⁻¹ at 300 °C to 2 S cm⁻¹ at 700 °C, was observed with an activation energy of 0.13(1) eV. X-ray diffraction, thermogravimetric analysis and differential scanning calorimetry data determined that the change in electronic conductivity was due to the degradation of the material into FeV₂O₄ and α-Fe₂O₃. It is believed that the conduction was due to electron hopping between vanadium d-orbitals. Neither FeVO₄ nor FeV₂O₄ are deemed suitable as anode materials for solid oxide fuel cells, due to redox instability.     

A constitutive model for granular materials considering grain breakage

A particle breakage has a significant impact on the mechanical behavior of granular materials. In this paper, we present an elasto-plastic model with two yield surfaces to which the influence of particle breakage has been introduced. The main feature of this model is to incorporate the change in the critical state line (CSL) consequent to the grain breakage induced by isotropic and deviatoric stresses during loading. For this purpose we propose a breakage function which connects the evolution of the CSL to ...     

Mercury speciation in the French seasonal snow cover

Snow samples have been collected in the French Alps in 1998, 1999 and 2000 in order to measure both total Hg (HgT) and reactive Hg (HgR). Concentrations of HgT were between 13 and 130 pg g(-1) and HgR concentrations were below the detection limit (approximately 0.8 pg g(-1)). Hg speciation in snow was evaluated on the basis of ionic complexation equilibrium with chloride, hydroxide, oxalate. The pH of the snow was found to be an important parameter for Hg speciation. For pH values near 3, HgC2O4 is predominant in snow samples except for snow strongly influenced by anthropogenic sources (in which case HgCl2 predominates). When pH > 4, Hg(OH)2 and HgOHCl are predominant. These latter pH values are observed for precipitation not influenced by anthropogenic sources but more by soil erosion, e.g. Saharan dusts. The knowledge of Hgr speciation in snow is a key question for understanding the mechanisms of transformation of these complexes in snow after precipitation.     

Toxic effects of Irgarol 1051 on phytoplankton and macrophytes in Lake Geneva

Irgarol 1051 is a recent herbicidal compound, inhibitor of photosynthesis, used in antifouling paints. This toxic is persistent in aquatic environments, with low abiotic and biotic degradation, highly phytotoxic, and has already been detected in estuaries and coastal areas, with suspected negative impacts on non-target organisms (aquatic plants and algae). We measured the toxicity of Irgarol 1051 to macrophytes and phytoplankton from Lake Geneva (between Switzerland and France) by determining chlorophyll fluorescence yield, and phytoplankton primary production. Long-term toxicity for phytoplankton was estimated in a microcosm study, and growth inhibition tests were performed with isolated algal strains. The concentration of Irgarol 1051 was analysed in the water, and the most polluted site showed a higher level (up to 135 ng/L) than the lowest observed effect concentration for phytoplankton (8-80 ng/L), while the macrophytes appeared to be more tolerant to Irgarol 1051 in short-term tests. The microcosm study showed that phytoplankton structure might be even more sensitive to Irgarol 1051.     

Surface enrichment of biomimetic apatites with biologically-active ions Mg2+ and Sr2+: A preamble to the activation of bone repair materials

The surface activation of calcium phosphate-based biomaterials for bone repair is an emerging route for improving bone regeneration processes. One way for such activation is through the exchange of surface calcium ions with biologically-active cations such as Mg²⁺ or Sr²⁺. In this work, the interactions of non-carbonated and carbonated nanocrystalline apatites with Mg²⁺ and Sr²⁺ were investigated by means of ion exchange experiments in solution. Langmuir-type isotherms were determined. For both Sr and Mg, a greater uptake was observed on the carbonated sample, and on both types of apatites the maximum strontium uptake was greater than that of magnesium. Inverse exchanges showed that the proportion of reversibly fixed ions after surface exchange was close to 85% for Mg and 75–80% for Sr. The results are related to the presence of a surface hydrated layer on the nanocrystals and possible exchange mechanisms are discussed. Our results favor the hypothesis of hetero-ionic surface exchanges (Mg²⁺↔Ca²⁺, Sr²⁺↔Ca²⁺) within the hydrated layer, and some analogy with octacalcium phosphate (OCP) is considered. This work should prove helpful for the control and understanding of the activation of synthetic apatite-based powders or scaffolds with bioactive elements, as well as for the global understanding of biomineralization processes.     

Influence of hysteresis on the transient hygrothermal response of a hemp concrete wall

Building envelopes with bio-materials like hemp concrete are currently undergoing an increasing development due to their low environmental impact and their interesting hygrothermal properties. This kind of hygroscopic material is characterized by a hysteretic behaviour. In this paper, the influence of such behaviour on the hygrothermal response of a building wall is discussed. An experimental facility is designed to measure temperature and relative humidity within a hemp concrete wall submitted to climatic variations. This facility provides a set of experimental data suited for benchmarking. Numerical simulations are performed with a hysteresis model implemented in a heat and moisture transfer model. Comparisons between numerical and experimental results show that hysteresis modelling is relevant to simulate the hygrothermal response of the wall. The discussion is extended to the influence of the initial moisture content.