无线电定位技术及其在CDMA中的应用

首先回顾了无线电定位的基本技术及其应用范围,重点讨论了基于ＡＯＡ和ＴＯＡ（ＴＤＯＡ）的各定位算法并分析了各乍的优缺点。从ＣＤＭＡ通信网中实现定位的实际情况出发,分析了定位算法、定位信号的选择及实现精确定位的关键技术。     

谈谈我校现代电工电子实验室的教学与开放

我校自动化学院电工电子实验中心相继建成了“ＥＤＡ开放实验室”,“ＣＡＤ／ＣＡＩ实验室”和“ＰＬＣ实验室”三个现代电工技术实验室,并于１９９７年相继投入教学与开放,本文结合我们参与现代电工技术实验室教学与开放的实践,谈谈我们的感受与体会．     

Novel dual-frequency and broad-band designs of slot-loadedequilateral triangular microstrip antennas

By loading properly arranged slots in an equilateral-triangular microstrip patch, novel dual-frequency and broad-band operations of a single-feed triangular microstrip antenna are presented. For dual-frequency operation, the proposed design is achieved by loading two pairs of narrow slots in the triangular patch, one embedded close to the side edges of the patch and the other inserted at the bottom edge of the patch. The obtained two operating frequencies are of same polarization planes and by varying the positions and lengths of the inserted slots at the bottom edge of the patch, a tunable frequency ratio of the two frequencies ranging from about 1.16 to 2.06 is obtained. Furthermore, it is found that by protruding a narrow slot out of the embedded slots close to the side edges, broad-band operation of the triangular microstrip antenna near its fundamental resonant mode can be achieved. Results show that the antenna bandwidth of the proposed broad-band design can be greater than 2.6 times that of a conventional triangular microstrip antenna. Details of the proposed dual-frequency and broad-band designs are described and typical experimental results are presented and discussed     

A novel PWM scheme for single-phase three-levelpower-factor-correction circuit

This paper presents a control scheme for a single-phase AC-to-DC power converter with three-level pulsewidth modulation. A single-phase power-factor-correction circuit is proposed to improve the power quality. The hysteresis current control technique for a diode bridge, with two power switches is adopted to achieve a high power factor and low harmonic distortion. A control scheme is presented where the line current is driven to follow the reference sinusoidal current which is derived from the DC-link voltage regulator, the capacitor voltage balance compensator and the output power estimator. The blocking voltage of each power device is clamped to half of the DC-link voltage. The high power factor and low current total harmonic distortion are verified by computer simulations and hardware tests     

基于异构加速的Φ-OTDR实时信号处理系统

针对相位敏感光时域反射计(Φ-OTDR)信号处理复杂、计算量大、实时性要求高的特点,提出一种基于现场可编程门阵列(FPGA)异构加速计算技术的Φ-OTDR实时信号处理系统。对外差探测式Φ-OTDR信号处理流程进行分析与分解,提出基于FPGA的滑动窗数据帧分割、多通道并行快速傅里叶变换(FFT)计算、频域滤波、短时能量求和等一系列加速计算方法。该系统最终实现在40 km光纤传感距离、2 kHz重复频率与1 m采样间隔下的长时间、实时扰动信号解调与显示,并且具有80%的帧重叠率。该FPGA系统作为异构加速器,能够减轻计算机数据处理压力,保证传感系统高重复频率下的运算实时性,为系统可靠性和稳定性提供了有效保障。     

公共场所背景噪声的频谱建模

对北京市内36个公共场所背景噪声声级进行了现场调查和测量。对它们的1/3 oct频谱进行曲线拟合,通过对这些拟合曲线的比较和分析,对公共场所的环境背景噪声建立了频谱的粗糙模型并举例说明该模型的使用方法,在用于公共广播系统的分类定级时可根据公共场所的类型和具体要求对模型进行适用性调整。     

An Artificial Skyrmion Platform with Robust Tunability in Synthetic Antiferromagnetic Multilayers

Magnetic skyrmions are topologically nontrivial spin structures, and their existence in ferromagnetically coupled multilayers has been widely reported with a disordered arrangement. Here, a nucleation scenario of ordered skyrmions in nanostructured synthetic antiferromagnetic (SAF) multilayers is proposed and experimentally demonstrated using direct magnetization imaging, indirect magnetometer and magnetoresistance measurement, and micromagnetic simulation. Instead of relying on Dzyaloshinskii–Moriya interaction, the antiferromagnetic interlayer exchange coupling in the SAF multilayers fulfills the role of nucleation and stabilization of skyrmions. The robustness of the proposed skyrmion nucleation scenario is examined against temperature from 4.5 to 300 K and device size from 400 to 1200 nm. Interestingly, these synthetic skyrmions still behave well with a size less than 100 nm. The higher stability than generic magnetic domains can be attributed to topological protection. The results thus provide an artificial skyrmion platform to meet the functional needs of high density and designable arrangement in magnonic and spintronic applications.     

Passive Localization of Signal Source Based on UAVs in Complex Environment

For the influence caused by multipath fading and non-line-of-sight(NLOS)transmission,it is challenging to accurately localize a moving signal source in complex environment by using the wireless sensor network(WSN)on the ground.In this paper,we establish a special WSN in the sky to address this challenge,where each sensor is loaded on an unmanned aerial vehicle(UAV)and the operation center of all the UAVs is fixed on the ground.Based on the analyzing of the optimal distribution and the position error calibration of all the sensors,we formulate the localization scheme to estimate the position of the target source,which combines the time difference of arrival(TDOA)method and the frequency difference of arrival(FDOA)method.Then by employing the semidefinite programming approach,we accurately obtain the position and velocity of the signal source.In the simulation,the validity of the proposed method is verified through the performance comparison.     

基于PLC电子技术的智能车库管理系统设计

本文即综合分析了国内智能车库管理系统理论研究成果,尝试基于PLC电子技术设计智能车库管理系统,按照总体设计思路、硬件配置、软件设计、仿真检测的研究步骤详细论述了基于PLC自动化电子技术的智能车库管理系统设计思路及功能实现过程.     

Active queue management algorithm based on data-driven predictive control

Model predictive control (MPC) is a popular strategy for active queue management (AQM) that is able to incorporate physical and user defined constraints. However, the current MPC methods rely on explicit fluid model of TCP behavior with input time delay. In this paper, we propose a novel AQM algorithm based on data-driven predictive control, called Data-AQM. For Internet system with large delay, complex change and bad disturbance, data-driven predictive controller can be obtained directly based on the input–output data alone and does not require any explicit model of the system. According to the input–output data, the future queue length in data buffer, which is the basis of optimizing drop probability, is predicted. Furthermore, considering system constraints, the control requirement is converted to the optimal control objective, then the drop probability is obtained by solving the optimal problem online. Finally, the performances of Data-AQM are evaluated through a series of simulations.