Fault-aware Communication Mapping for NoCs with Guaranteed Latency

As feature sizes shrink, transient failures of on-chip network links become a critical problem. At the same time, many applications require guarantees on both message arrival probability and response time. We address the problem of transient link failures by means of temporally and spatially redundant transmission of messages, such that designer-imposed message arrival probabilities are guaranteed. Response time minimisation is achieved by a heuristic that statically assigns multiple copies of each message to network links, intelligently combining temporal and spatial redundancy. Concerns regarding energy consumption are addressed in two ways. First, we reduce the total amount of transmitted messages, and, second, we minimise the application response time such that the resulted time slack can be exploited for energy savings through voltage reduction. The advantages of the proposed approach are guaranteed message arrival probability and guaranteed worst case application response time.     

不确定多变量系统控制的多模型设计方法及其在造纸机控制中的应用

本文用有限个时不变模型描述不确定多变量系统,给出了一种鲁棒控制器频域设计方 法,使得由控制器和任一模型构成的单位反馈系统都达到闭环的稳定性、渐近调节和跟踪、弱 相互耦合以及期望的瞬态特性.该方法应用于造纸机的多种纸张的定量和水份控制,获得了 令人满意的效果.     

Verification of submodeling technique in thermomechanical reliability assessment of flip-chip package assembly

In this paper we verified the submodeling technique applied in the thermomechanical reliability assessment of a flip-chip BGA under accelerated thermal cycling test conditions. Since the steady-state creep model was implemented for the solder bump to better represent its realistic mechanical behavior, submodeling procedures developed specifically for path-dependent thermomechanical problems were considered. A detailed global model for the flip-chip BGA was built up to verify submodeling solutions. This model also served as a benchmark to examine solution discrepancies caused by different simplifications of the global model.     

Using Bandwidth-Space Partitioning to Improve Cell Coverage and Near-Far Unfair Access Problem in a Noise-Limited CDMA Cellular Network

This paper concerns CDMA cellular networks equipped with conventional matched filter receivers. For this type of cellular networks, two problems exist. One is the inverse relationship between the coverage and capacity, and the other one is the near-far unfair access problem. To resolve these two problems, a bandwidth-space partitioning technique is adopted. Several admission control schemes based on the bandwidth-space partitioning technique are proposed, and their performances are evaluated based on the simulation.Shih-Tsung Yang received his B.S. (1989) and M.S. (1991) degrees in electrical engineering from the National Taiwan University, and Ph.D. (1999) degree in electrical and computer engineering from University of Maryland, College Park.From 1999 to 2000, he was with SBC Technology Resourtces, Inc. where he was involved in the network architecture design for the ATM based networks. From November 2000 to May 2003, he was with Transilica/Microtune where he was involved in the design of Baseband and RF for the wireless communications. Since May 2003, Dr. Yang is now with Genesys Logic, Inc. where he is responsible for the baseband design of the WLAN and Ethernet.Dr. Yang’s research interests are in the area of Digital Communications, Communication networks and signal processing. E-mail: thomas.yang@genesyslogic.com.twAnthony Ephremides received his B.S. degree from the National Technical University of Athens (1967), and M.S. (1969) and Ph.D. (1971) degrees from Princeton University, all in Electrical Engineering. He has been at the University of Maryland since 1971, and currently holds a joint appointment as Professor in the Electrical Engineering Department and in the Institute of Systems Research (ISR) of which he is a founding member. He is co-founder of the NASA Center for Commercial Development of Space on Hybrid and Satellite Communications Networks established in 1991 at Maryland as an off-shoot of the ISR. He served as Co-Director of that Center from 1991 to 1994.He was a Visiting Professor in 1978 at the National Technical University in Athenas, Greece, and in 1979 at the EECS Department of the University of California, Berkeley, and at INRIA, France. During 1985-1986 he was on leave at MIT and ETH in Zurich, Switzerland. He was the General Chairman of the 1986 IEEE Conference on Decision and Control in Athens, Greece and of the 1991 IEEE International Symposium on Information Theory in Budapest, Hungary. He also organized two workshops on Information theory in 1984 (Hot Springs, VA) and in 1999 (Metsovo, Greece). He was the Technical Program Co-Chair of the IEEE INFOCOM in New York City in 1999 and of the IEEE International Symposium on Information theory in Sorrento, Italy in 2000. He has also been the Director of the Fairchild Scholars and Doctoral Fellows Program, an academic and research partnership program in Satellite Communications between Fairchild Industries and the University of Maryland. He won the IEEE Donald E. Fink Prize Paper Award (1992) and he was the first recipient of the Sigmobile Award of the ACM (Association of Computer Machinery) for contributions to wireless communications in 1997. He has been the President of the Information Theory Society of the IEEE (1987) and has served on its Board of Governors almost continuously from 1981 until the present. He was elected to the Board of Directors of the IEEE in 1989 and 1990. Dr. Ephremides has authored or co-authored over 100 technical journal papers and 300 technical conference presentations. He has also contributed chapters to several books and edited numerous special issues of scientific journals. He has also won awards from the Maryland Office of Technology Liaison for the commercialization of products and ideas stemming from his research. He has served on the Editorial Boards of the IEEE Transactions on Automatic Control, IEEE Transactions on Information theory, the Journal of Wireless Networks, and the International Journal of Satellite Communications.He has been the Dissertation Supervisor of over twenty Ph.D. students who now hold prominent positions in academia, industry, and research labs. He is the founder and President of Pontos, Inc., a Maryland company that provides technical consulting services, since 1980.Dr. Ephremides’ interests are in the areas of communication theory, communication systems and networks, queueing systems, signal processing, and satellite communications. His research has been continuously supported since 1971 by NSF, NASA, ONR, ARL, NRL, NSA, and Industry. E-mail: tony@eng.umd.edu     

Segregation band formation in Al-Si die castings

Banded defects are often found in high-pressure die castings. These bands can contain segregation, porosity, and/or tears, and changing casting conditions and alloy are known to change the position and make-up of the bands. Due to the complex, dynamic nature of the high-pressure die-casting (HPDC) process, it is very difficult to study the effect of individual parameters on band formation. In the work presented here, bands of segregation similar to those found in cold-chamber HPDC aluminum alloys were found in laboratory gravity die castings. Samples were cast with a range of fraction solids from 0 to 0.3 and the effect of die temperature and external solid fraction on segregation bands was investigated. The results are considered with reference to the rheological properties of the filling semisolid metal and a formation mechanism for bands is proposed by considering flow past a solidifying immobile wall layer.     

核磁共振谱的岩石孔喉结构分析

刘堂宴 ,王绍民 ,傅容珊 ,周明顺 ,李艳华 ,罗曼 .核磁共振谱的岩石孔喉结构分析 .石油地球物理勘探 ,2 0 0 3,38(3) :32 8～ 333岩心核磁共振 T2 谱和压汞分析数据均在一定程度上反映了岩石的孔喉结构 ,理论分析表明 ,这两组数据具有相关性。应用岩心核磁共振 T2 谱研究岩石孔喉结构 ,关键是确定 T2 与 Pc的转换系数。但以前的方法在 T2与 Pc 的转换过程中 ,需要涉及某些岩石特性参数 ,实用中有一定困难。本文直接利用岩心核磁共振 T2 谱和压汞分析数据之间的相关性 ,客观地确定 T2 与 Pc之间的转换系数 ,避免了确定岩石特性参数的困难。应用本文方法 ,对 6块岩心的多种核磁共振分析数据进行了对比分析 ,做出了 NMR (Nuclear Magnetic Resonance,简称NMR) T2 毛管力曲线和孔喉半径分布 ,并将这些结果与压汞分析的结果进行了对比。结果表明 ,岩心 NMR T2谱在实用性和评价精度上均略显优势 ;至少是在饱含油的条件下 ,岩心的 NMR T2 谱可以用于研究孔喉结构分布 ,油气的弛豫特性作为影响背景值存在 ,对于评价结果没有明显的影响 ;在全部 6块岩心中 ,T2 与 Pc 的转换系数位于 2 5 0 0～ 4 0 0 0μs· MPa之间。     

Review on testers for measuring flow properties of bulk solids

 The author was asked by the International Fine Particle Research Institue (IFPRI) to write a critical review on shear testers for IFPRI-members. The review was delivered to IFPRI in summer 1999. Following the contract with IFPRI it was not allowed to publish the review elsewhere for at least two years. Granular Matter invited the author to submit the review in the original form; during the refereeing process (besides other changes) it turned out that some remarks should be added here for clarification: - Since 1999, the author is not aware of a really new device for testing bulk solid properties, which could lead to a change of the general comments and conclusions provided in the review. It was argued, that the review is referring too much to the work of Jenike, while the works of Johanson and Peschl were not adequately cited. Both are excellent engineers with a lot of experience, but their basic ideas are not available in published form, and if, they are not set in relation to alternative approaches so that an objective comparison in detail would be a future research issue rather than a topic in this report. A discussion on the influence of electrostatic charges was missing. There hardly is an influence, since the particles are in continuous contact. Only with non-conducting plastic particles electrostatic charges could cause problems. But no relevant experiments and results are known. In closed systems, the effect of electric charges is thus mainly neglected, but it is clear that electrostatic forces are eminent in flows with a free surface – an issue not addressed in this review. Received: 1 November 2002     

单膛石灰竖窑的改造

我厂竖窑容积为250m^3，设计利用系数为0．85t/(m^3．d)。随烧结产量的不断增加，石灰产量已不能满足烧结生产的需要。为了提高石灰产量，进行了扩容改造，容积由原来250m^3增加到298m^3，并针对目前生产实际提出下一步改造设想。     

Grain refinement of Al-7Si alloys and the efficiency assessment by recognition of cooling curves

Under sand cup solidification condition, the influence of Ti, B concentration, and holding time on the grain size of a high-purity Al-7Si alloy has been systematically studied. It is found that the grain size decreases rapidly at lower Ti or B additions, and is almost constant at the higher concentrations. For Al-3B refined Al-7Si alloys, the grain size increases at the initial period of holding time, and then rapidly becomes independent of holding time; while for Al-7Si alloys refined with Al-5Ti-1B, the grain size increases with holding time throughout. To evaluate the refinement efficiency, a new method named “intelligent evaluating of melt quality by pattern recognition of thermal analysis cooling curves” has also been introduced in this article. The results show that comparing the cooling curve of the evaluated melt with those in a database to find the most similar one to it can precisely assess the grain refinement efficiency of the measured Al-7Si alloy. In addition, the influence of Ti, B addition levels, and pouring temperatures on some characteristic parameters of cooling curve has also been discussed.     

济钢中厚板厂的技术改造与发展

结合济钢中厚板厂二期和三期工程、开发管线钢项目和大板坯连铸高效改造及炉外精炼改造，介绍了该厂的技术改造项目，对今后的发展进行了阐述．