Microwave plasma synthesis of TiN and ZrN nanopowders

This work demonstrates that TiN and ZrN nanopowders can be prepared by microwave plasma synthesis method. The effects of flow rate of plasma forming gas, flow rate of carrier gas and feeding rate of precursor raw material to the average particle size were studied. The TiN and ZrN nanopowders were characterized by means of transmission electron microscopy (TEM) and X-ray diffraction (XRD).     

基于纠错编码和小波变换的数字图像水印算法

文章提出了一种基于小波变换和纠错编码的数字图像水印算法,该算法不需要利用原始图像。实验结果表明,该算法较好地保持了图像的质量,并大大提高了检测的可靠性,对常见的图像处理方法显示了较强的鲁棒性。     

F-X域粘弹性波动方程保幅偏移

提出了一种利用粘弹性声波波动方程进行偏移的新方法。其基本思路是,修改成像条件,使修改后的成像方程中考虑振幅补偿,然后利用粘弹性、单程波动方程在F-X域对震源和接收点波场进行延拓,进而完成散射、透射等补偿。理论数据处理和实际地震资料处理表明,该方法理论基础可靠,处理效果明显,能较好地解决实际地质问题。     

"信号调制法"研究电子诱导脱附--基本原理及误差分析

电子诱导脱附是近年来在真空科学与表面科学领域内的热门研究课题。它不仅作为研究和探讨原子激发过程以及电子能量传输机制的有效手段,而且已经逐渐成为获取表面和界面结构、状态等信息的有效方法。“信号调制法”是利用脉冲电流能量调制的电子探束取代传统的直流电子探束,并通过测量电子诱导脱附产物引起的压强变化量,来研究电子诱导脱附的新方法。本文系统地介绍了该方法的基本原理,并从理论上对该方法带来的测量误差进行了分析。     

低温等离子体对血管内金属支架的表面改性

生物材料用于人体必须要具备生物相容性。尤其是与血液相接触的材料如血管内支架必须要具备血液相容性。材料的表面特性直接影响血液系统中是否会出现血栓。本文针对金属血管内支架的表面特性、与血液的界面反应以及用于提高血液相容性的低温等离子表面改性进行了简要综述     

Abstract Implementation of Algebraic Specifications in a Temporal Logic Language

A formal technique for incorporating two specification paradigms is presented,in which an algebraic specification is implemented by a set of abstract procedures specified in pre and post-condition style.The link between the two level specifications is provided via a translation from terms of algebraic specifications into temporal logic formulae representing abstract programs.In terms of translation,a criterion for an abstract implementation satisfying its specification is given,which allows one to check the consistency between the two levels of specifications.The abstract implementations can be refined into executable code by refining each abstract procedure in it.It is proved that the satisfication relation between a specification and its implementations is preserved by such refinement steps.     

A compact LTCC branch-line coupler UsingModified-T equivalent-circuit modelfor transmission line

In this letter, a compact branch-line coupler is proposed by making good use of the three-dimensional layout capability of the low-temperature co-fired ceramic (LTCC) substrate. This branch-line coupler is accomplished by using lumped-inductors and lumped-capacitors to realize the modified-T equivalent-circuit model for the transmission line so that the circuit size may drastically be reduced. Specifically, a very compact LTCC branch-line coupler with a size of 0.079/spl lambda//spl times/0.0717/spl lambda/ is implemented and carefully examined, where /spl lambda/ is the wavelength of the multilayer structure at the operating frequency f/sub 0/.     

Robust Space Time Receiver for CDMA-based Antenna Arrays

In this paper, we propose a new robust code division multiple access (CDMA) receiver of which weight vector is obtained by projecting the effective spatio-temporal signature waveform onto the signal subspace of the data covariance matrix. We verified our proposed algorithm by the field measured data obtained with a custom-built wideband CDMA test-bed. It will be shown that the proposed algorithm is robust to the signal mismatch.     

降低精炼钢中氢氧含量的探索

主要介绍通过优化炼钢生产工艺,使产品满足新的技术要求:S≤0.010％,P≤0.015％.[H]≤0.0002％,[O]≤0.0045％,[N]≤0.0055％。