Product structure (BOM)-based product similarity measures using orthogonal procrustes approach

In geometry, two configurations are called similar if they can be brought to a complete match by rigid motions and dilations. In the simplest case, product designs X and Y have the same dimensionality and same number of points which can be brought into a one to one correspondence by substantive considerations. Under orthogonal transformations, product design Y can only be rotated and reflected in order to approximate product design X. As for the “as close as possible” or “relatively close” criterion, a reasonable definition would be to measure the distances between corresponding points, square these values, and add them to obtain the sum-of-squares criterion L. In this paper, a product structure (BOM)-based product similarity measures using orthogonal procrustes approach is proposed. A structural product is first transformed into bill of materials (BOM), the structural similarity measurement between a product query and target product is calculated and evaluated using orthogonal procrustes approach. The results show that the proposed product structure similarity measure method can help companies find desired product information based on BOM feature.     

Label-free Growth Receptor-2 Detection and Dissociation Constant Assessment in Diluted Human Serum Using a Longitudinal Extension Mode of a Piezoelectric Microcantilever Sensor

We have investigated real-time, label-free, in-situ detection of human epidermal growth factor receptor 2 (Her2) in diluted serum using the first longitudinal extension mode of a lead zirconate-lead titanate (PZT)/glass piezoelectric microcantilever sensor (PEMS) with H3 single-chain variable fragment (scFv) immobilized on the 3-mercaptopropyltrimethoxysilane (MPS) insulation layer of the PEMS surface. We showed that with the longitudinal extension mode, the PZT/glass PEMS consisting of a 1 mm long and 127 μm thick PZT layer bonded with a 75 μm thick glass layer with a 1.8 mm long glass tip could detect Her2 at a concentration of 6-60 ng/ml (or 0.06-0.6 nM) in diluted human serum, about 100 times lower than the concentration limit obtained using the lower-frequency flexural mode of a similar PZT/glass PEMS. We further showed that with the longitudinal mode, the PZT/glass PEMS determined the equilibrium H3-Her2 dissociation constant K(d) to be 3.3±0.3 × 10(-8) M consistent with the value, 3.2±0.28 ×10(-8) M deduced by the surface plasmon resonance method (BIAcore).     

Coherency Hub Design for Multisocket Sun Servers with CoolThreads Technology

CoHub, a coherency hub ASIC, provides a cost-effective way to extend a glueless two-node chip-multithreading system to a four-node system without changes to the processor. The four-node, 256-thread system achieves near-linear scaling of performance with thread count on transaction-processing workloads. Time-to-market pressure, 800-MHz operation, and a six-stage pipeline were among the constraints that shaped CoHub's design.     

Weaknesses and improvements of the Yoon–Ryu–Yoo remote user authentication scheme using smart cards

Remote user authentication scheme is a procedure which allows a server to authenticate a remote user through insecure channel. Recently, Yoon, Ryu and Yoo made an enhancement based on Ku–Chen’s remote user authentication scheme by using smart cards. The scheme has the merits of providing mutual authentication, no verification table, freely choosing password, involving only few hashing operations and parallel session attack resistance. In this paper, we point out security flaws of Yoon–Ryu–Yoo’s protocols against masquerading attack, off-line password guessing attacks and parallel session attack. An improvement to enhance Yoon–Ryu–Yoo’s security scheme is proposed.     

A graph-theoretic model for optimizing queries involving methods

Traditional algorithms for optimizing the execution order of joins are no more valid when selections and projections involve methods and become very expensive operations. Selections and projections could be even more costly than joins such that they are pulled above joins, rather than pushed down in a query tree. In this paper, we take a fundamental look at how to approach query optimization from a top-down design perspective, rather than trying to force one model to fit into another. We present a graph model which is designed to characterize execution plans. Each edge and each vertex of the graph is assigned a weight to model execution plans. We also design algorithms that use these weights to optimize the execution order of operations. A cost model of these algorithms is developed. Experiments are conducted on the basis of this cost model. The results show that our algorithms are superior to similar work proposed in the literature. Received 20 April 1999 / Accepted 9 August 2000 Published online 20 April 2001     

Synthesis of bio-functionalized copolymer particles bearing carboxyl groups via a microfluidic device

Monodisperse copolymer particles carrying surface carboxyl groups in the range of 50–200 μm were prepared by in situ UV polymerization of ethyleneglycol dimethacrylate (EGDMA) with acrylic acid (AA) via a microfluidic flow-focusing device (MFFD). The design of the coaxial orifices in the MFFD enables the confinement of the comonomer liquid thread to the central axis of the microchannel, which can avoid the wetting problem of comonomer liquid with the microchannel and can successfully produce monodisperse copolymer microspheres with coefficient of variance below 5%. The effects of concentration of EGDMA and AA on droplet diameters and the distribution of carboxyl group on particle surfaces were examined. It has been found that, increasing the concentration of AA would decrease particle sizes, but increase the distribution of carboxyl group on particle surfaces. Bioconjugation of the carboxylated copolymer particles with the anti-rabbit IgG–Cy3 conjugates was successfully demonstrated. By increasing the concentration of AA accompanied with decreasing the particle sizes, high efficiency of bioconjugation on carboxylated copolymer particles was achieved. The rapid continuous synthesis of carboxylated copolymer particles via a microfluidic device provides a reliable control of particle sizes and composition for massive production in biotechnological applications.     

A resource broker with an efficient network information model on grid environments

This paper describes a resource broker whose main function is to match available resources to user needs. The resource broker provides a uniform interface for accessing available and appropriate resources via user credentials. We also focus on providing approximate measurement models for network-related information using NWS for future scheduling and benchmarking. We first propose a network measurement model for gathering network-related information (including bandwidth, latency, forecasting, error rates, etc.) without generating excessive system overhead. Second, we constructed a grid platform using Globus Toolkit that integrates the resources of five schools in Taichung integrated grid environment resources (TIGER). The resource broker runs on top of TIGER. Therefore, it provides security and current information about available resources and serves as a link to the diverse systems available in the Grid.

Optimal design of CMOS pseudoactive pixel sensor (PAPS) structure for low-dark-current and large-array-size imager applications

In this paper, a pixel structure called the optimal pseudoactive pixel sensor (OPAPS) is proposed and analyzed for the applications of CMOS imagers. The shared zero-biased-buffer in the pixel is used to suppress both dark current of photodiode and leakage current of pixel switches by keeping both biases of photodiode and parasitic pn junctions in the pixel bus at zero voltage or near zero voltage. The factor of photocurrent-to-dark-current ratio per pixel area (PDRPA) is defined to characterize the performance of the OPAPS structure. It is found that a zero-biased-buffer shared by four pixels can achieve the highest PDRPA. In addition, the column sampling circuits and output correlated double sampling circuits are also used to suppress fixed-pattern noise, clock feedthrough noise, and channel charge injection. An experimental chip of the proposed OPAPS CMOS imager with the format of 352/spl times/288 (CIF) has been designed and fabricated by using 0.25-/spl mu/m single-poly-five-level-metal (1P5M) N-well CMOS process. In the fabricated CMOS imager, one shared zero-biased-buffer is used for four pixels where the PDRPA is equal to 47.29 /spl mu/m/sup -2/. The fabricated OPAPS CMOS imager has a pixel size of 8.2/spl times/.2 /spl mu/m, fill factor of 42%, and chip size of 3630/spl times/3390 /spl mu/m. Moreover, the measured maximum frame rate is 30 frames/s and the dark current is 82 pA/cm/sup 2/. Additionally, the measured optical dynamic range is 65 dB. It is found that the proposed OPAPS structure has lower dark current and higher optical dynamic range as compared with the active pixel sensor (APS) and the conventional passive pixel sensor (PPS). Thus, the proposed OPAPS structure has high potential for the applications of high-quality and large-array-size CMOS imagers.     

A fault-tolerant wormhole routing scheme for torus networks with nonconvex faults

In this paper, we present a fault-tolerant routing algorithm for torus networks by using only 4 virtual channels. The proposed algorithm is based on the solid fault model, which includes rectangular faults and many practical nonconvex faults. Previous works need at least 6 virtual channels to achieve the same fault-tolerant ability.     

Boundary effects on the optical properties of InGaN multiple quantum wells

We examine the issues of spontaneous and piezoelectric polarization discontinuity on the optical properties of 3.0-nm-thick indium gallium nitride (InGaN) multiple quantum wells (MQWs). A quench of band-edge emission from the cap GaN layer is observed when the photoexcitation source is changed from a 355- to a 248-nm laser. The interband transitions from the InGaN wells exhibit a linear dependence on the 1) spectral blue shift of /spl sim/8.5/spl times/10/sup -18/ meV /spl middot/ cm/sup 3/ and 2) change of the internal field of /spl sim/3/spl times/10/sup -14/ meV /spl middot/ cm/sup 2/ with the injected carrier density up to N/sub inj//spl sim/10/sup 19/ cm/sup -3/ at 77 K. These observations are attributed to the redistribution of photogenerated carriers in the InGaN wells due to the polarization discontinuity at the QW interface and the surface band bending effect. By incorporating an additional boundary condition of surface Fermi-level pinning into the Poisson equation and the band-structure analysis, it is shown the emission from the InGaN-GaN MQWs is dominant by the recombination between the high-lying subbands and the screening of internal field effects.