An Innovative Understanding of Metal–Insulator–Metal (MIM)-Capacitor Degradation Under Constant-Current Stress

This paper provides a new understanding of metal-insulator-metal-capacitor-degradation behavior under a wide range of constant-current-stress conditions. It was found that capacitance degrades with stress, but the behavior of the degradation strongly depends on the stress-current density. At high stress levels, the capacitance increases logarithmically as the injection charge increases until dielectric breakdown occurs. At lower stress conditions, the degradation rate is proportional to the stress current and reverses after a certain period of time. A metal-insulator interlayer is observed using cross-sectional transmission-electron-microscopy micrographs, which possibly explains this reversal phenomenon.     

A method for the design of MRI radiofrequency coils based on triangular and pulse basis functions.

This paper presents a numerical technique for the design of an RF coil for asymmetric magnetic resonance imaging (MRI) systems. The formulation is based on an inverse approach where the cylindrical surface currents are expressed in terms of a combination of sub-domain basis functions: triangular and pulse functions. With the homogeneous transverse magnetic field specified in a spherical region, a functional method is applied to obtain the unknown current coefficients. The current distribution is then transformed to a conductor pattern by use of a stream function technique. Preliminary MR images acquired using a prototype RF coil are presented and validate the design method.     

Uncorrelated component analysis for blind source separation

The uncorrelated component analysis (UCA) of a stationary random vector process consists of searching for a linear transformation that minimizes the temporal correlation between its components. Through a general analysis we show that under practically reasonable and mild conditions UCA is a solution for blind source separation. The theorems proposed in this paper for UCA provide useful insights for developing practical algorithms. UCA explores the temporal information of the signals, whereas independent component analysis (ICA) explores the spatial information; thus UCA can be applied for source separation in some cases where ICA cannot. For blind source separation, combining ICA and UCA may give improved performance because more information can be utilized. The concept of single UCA (SUCA) is also proposed, which leads to sequential source separation.This work was supported in part by grants from the Research Grants Council of Hong Kong, grants HKU553/96M, HKU7036/97E, and HKUST776/96E.     

Long multifilament Bi-2223 Ag-sheathed superconducting tapes and solenoids

Multifilament Ag-sheathed BiPbSrCaCuO (2223) superconducting tapes containing 49 filaments were fabricated by the powder-in-tube route and the roll-anneal process. The transport critical current densityJ _c was 1.3×10⁴ A cm^–2 at 77 K and 7×10⁴ A cm^–2 at 4.2 K in self-field. A 12-m-long tape was used to construct superconducting solenoids (50, 28, and 14 mm internal diameters) generating dc fields 380–1070 G at 4.2 K. Measurements of the variation ofJ _c with field (0–1.6 T) and bend strain (0–5%) are used to explain the performance of the solenoids. The critical bend strain of tapes was about 1.5%.     

Analyzing fault and severity in pedestrian–motor vehicle accidents in China

The number of pedestrian–motor vehicle accidents and pedestrian deaths in China surged in recent years. However, a large scale empirical research on pedestrian traffic crashes in China is lacking. In this study, we identify significant risk factors associated with fault and severity in pedestrian–motor vehicle accidents. Risk factors in several different dimensions, including pedestrian, driver, vehicle, road and environmental factors, are considered. We analyze 6967 pedestrian traffic accident reports for the period 2006–2010 in Guangdong Province, China. These data, obtained from the Guangdong Provincial Security Department, are extracted from the Traffic Management Sector-Specific Incident Case Data Report. Pedestrian traffic crashes have a unique inevitability and particular high risk, due to pedestrians’ fragility, slow movement and lack of lighting equipment. The empirical analysis of the present study has the following policy implications. First, traffic crashes in which pedestrians are at fault are more likely to cause serious injuries or death, suggesting that relevant agencies should pay attention to measures that prevent pedestrians from violating traffic rules. Second, both the attention to elderly pedestrians, male and experienced drivers, the penalty to drunk driving, speeding, driving without a driver's license and other violation behaviors should be strengthened. Third, vehicle safety inspections and safety training sessions for truck drivers should be reinforced. Fourth, improving the road conditions and road lighting at night are important measures in reducing the probability of accident casualties. Fifth, specific road safety campaigns in rural areas, and education programs especially for young children and teens should be developed and promoted. Moreover, we reveal a country-specific factor, hukou, which has significant effect on the severity in pedestrian accidents due to the discrepancy in the level of social insurance/security, suggesting that equal social security level among urban and rural people should be set up. In addition, establishing a comprehensive liability distribution system for non-urban areas and roadways will be conducive to both pedestrians’ and drivers’ voluntary compliance with traffic rules.     

Demand-side management impact on the transmission and distributionsystem

A project to assess the impact on the transmission and distribution (TD) system due to the implementation of demand-side management (DSM) programs is described. Traditional TD planning methods are reviewed and procedural changes necessary to fully integrate DSM strategy analysis with the system planning process are discussed. Test procedures and results are discussed for a study conducted at a host utility. Several DSM strategies are analyzed to assess the impacts on a TD system serving a large metropolitan area     

Identification of ligands for olfactory receptors by functional expression of a receptor library

The recognition of odorants by olfactory receptors represents the first stage in odor discrimination. Here, we report the generation of an expression library containing a large and diverse repertoire of mouse olfactory receptor sequences in the transmembrane II-VII region. From this library, 80 chimeric receptors were tested against 26 odorants after transfection into HEK-293 cells. Three receptors were identified to respond to micromolecular concentrations of carvone, (-) citronellal, and limonene, respectively. We also found that the mouse I7 receptor, unlike the rat I7 receptor, prefers heptanal instead of octanal, as a result of a single valine-to-isoleucine substitution. This finding represents the beginning of a molecular understanding of odorant recognition. The identification, on a large scale, of cognate receptor-odorant interactions should provide insight into olfactory coding mechanisms.