ENHANCEMENT OF THE SINERGIC EXTRACTION OF COBALT WITH MIXTURES OF l-PHENYL-3-METHIL-’4-BENZOTtLPIRAZOL-5-ONE AND DODECYLAMINE BY EMULSION FORMATION.

The synergic extraction of cobalt (II) from sulphate medium (O.33M) with l-phenyl-S-methyl-l-benzoylpyrazol-S-one (HL) and n-dodecylamine (Am) in toluene has been explained by: of constant logK_s=5.15. When the extraction is performed from perchlorate and nitrate media ([X]=[C10₄]=[N0₃ ]=1.0M), an emulsion, in contact with a clear organic phase, is formed owing to the amphiphilic properties of AmH.X. This Induces an enhancement of the synergic extraction at low AmH.X concentrations. The extraction equilibrium is : Where int. denotes interfacial species and logK +log{AmH.X} -log[X;}_int =logK_int = -6.10 and -6.25 (X?ClO₄ and NO₃). (AmH⁺ denotes single or aggregated ammonium cations).     

Use of hydroxytelechelic cis-1,4-polyisoprene (HTPI) in the synthesis of polyurethanes (PUs). Part 1. Influence of molecular weight and chemical modification of HTPI on the mechanical and thermal properties of PUs

New telechelic cis-1,4-polyisoprene oligomers bearing an hydroxyl group at the end of the polyisoprene backbone and possessing controlled molecular weights were used as soft segments in the elaboration of polyurethane elastomers. Besides, the well defined hydroxytelechelic cis-1,4-polyisoprene (HTPI) structure obtained through a controlled methodology, was chemically modified leading to hydrogenated and epoxidized oligomers based polyurethanes. The influence of the structural changes of these precursors on the polyurethanes properties have been studied. Thus, mechanical parameters as well as glass transition and mechanical transition temperature measurements indicated an increase in PUs hardness when the length of soft segment decreases and when the degree of epoxidized and hydrogenated isoprenic moieties increases. Moreover, based on thermogravimetric analysis (TGA), a linear relationship was established between the weight loss in the urethane stage degradation and the amount of hard segments in the PUs. Otherwise, the hydrogenated soft segments were found more thermally stable than the epoxidized and the non modified ones. By comparison with similar investigations developed from commercial oligodienes (PBHT R20 LM^® and EPOL^®), this study mainly showed that the PUs based on hydrogenated hydroxytelechelic cis-1,4-polyisoprenes were more thermally stable and softer than the EPOL^® based analogues.     

Alterations in Serum Polyunsaturated Fatty Acids and Eicosanoids in Patients with Mild to Moderate Chronic Obstructive Pulmonary Disease (COPD)

Smoking is a major risk factor for several diseases including chronic obstructive pulmonary disease (COPD). To better understand the systemic effects of cigarette smoke exposure and mild to moderate COPD—and to support future biomarker development—we profiled the serum lipidomes of healthy smokers, smokers with mild to moderate COPD (GOLD stages 1 and 2), former smokers, and never-smokers (n = 40 per group) (ClinicalTrials.gov registration: {"type":"clinical-trial","attrs":{"text":"NCT01780298","term_id":"NCT01780298"}}NCT01780298). Serum lipidome profiling was conducted with untargeted and targeted mass spectrometry-based lipidomics. Guided by weighted lipid co-expression network analysis, we identified three main trends comparing smokers, especially those with COPD, with non-smokers: a general increase in glycero(phospho)lipids, including triglycerols; changes in fatty acid desaturation (decrease in ω-3 polyunsaturated fatty acids, and an increase in monounsaturated fatty acids); and an imbalance in eicosanoids (increase in 11,12- and 14,15-DHETs (dihydroxyeicosatrienoic acids), and a decrease in 9- and 13-HODEs (hydroxyoctadecadienoic acids)). The lipidome profiles supported classification of study subjects as smokers or non-smokers, but were not sufficient to distinguish between smokers with and without COPD. Overall, our study yielded further insights into the complex interplay between smoke exposure, lung disease, and systemic alterations in serum lipid profiles.     

Myo-InositolTrisPyroPhosphate treatment leads to HIF-1α suppression and eradication of early hepatoma tumors in rats

Myo-inositol trispyrophosphate (ITPP), a synthetic allosteric effector of hemoglobin, increases the regulated oxygen-releasing capacity of red blood cells (RBCs), leading to suppression of hypoxia-inducible factor 1α (HIF-1α) and to down-regulation of hypoxia-inducible genes such as vascular endothelial growth factor (VEGF). As a consequence, tumor growth is markedly affected. The effect of weekly intravenous injection of ITPP on an orthotopic, syngenic rat hepatocellular carcinoma (HCC) model was compared to that for untreated animals and animals subjected to conventional Doxorubicin chemotherapy. The longitudinal examination of HCC was performed by microCT imaging, and the cellular and molecular changes were evaluated by histology and Western blotting analysis of HIF-1α, VEGF, and caspase-3 gene expression in the tumor and in the surrounding liver. Hematologic impact was evaluated by blood cell-count measurement and determination of P50 (oxygen partial pressure for a 50 % oxygen saturation of hemoglobin). The HCC evaluation by microCT revealed a high potency of ITPP for tumor growth inhibition, thus allowing long-term survival and even cure of almost all the treated animals. The P50 value of hemoglobin in RBCs underwent a shift of 30 % following ITPP injection. Under these conditions, HIF-1α activity was strongly decreased, VEGF expression was down-regulated, and apoptosis was induced in HCC and surrounding liver cells, as indicated by Caspase-3 expression. ITPP did not affect hematologic parameters during treatment. The observations of in vivo tumor eradication suggest a significant clinical potential for ITPP in cancer therapy.     

Polyphosphates and pyrophosphates of hexopyranoses as allosteric effectors of human hemoglobin: synthesis, molecular recognition, and effect on oxygen release

Polyphosphorylated and perphosphorylated hexopyranose monosaccharides and disaccharides were synthesized from parent or partially protected carbohydrates as potential allosteric effectors of hemoglobin. A study toward the construction of seven- and eight-membered cyclic pyrophosphates was also performed on the sugars which had the proper orientation, protection, and number of phosphates. All final compounds were tested for their efficiency on oxygen release from human hemoglobin. Several compounds presented higher potency than myo-inositol hexakisphosphate, which is the most efficient of the known allosteric effectors of hemoglobin. Structure-activity relationships were analyzed. The affinity and efficiency depend on the number of phosphates attached to the carbohydrate skeleton and are related primarily to the number of negative charges present. Other effects operate, but play a lesser role.     

Efficient Immobilization of Yeast Transketolase on Layered Double Hydroxides and Application for Ketose Synthesis

Transketolase (TK) from S. cerevisiae was successfully immobilized on layered double hydroxides (LDH) using simple, affordable and efficient adsorption and coprecipitation based immobilization procedures. Optimization of the preparation was performed using zinc aluminium nitrate (Zn₂Al‐NO₃) and magnesium aluminium nitrate (Mg₂Al‐NO₃) LDH as immobilization supports, and the protein‐to‐LDH weight ratio (Q) was varied. The highest immobilization yields (98–99%) and highest relative specific activities (4.2–4.4 U⋅mg⁻¹ for the immobilized enzyme compared to 4.5 U⋅mg⁻¹ for the free enzyme) were both achieved when using a protein‐to‐LDH weight ratio (Q) of 0.38. Efficient lyophilization of the LDH‐TK bionanocomposites thus synthesized was proven to allow easy use and storage of the supported TK with no significant loss of activity over a three‐month period. The kinetic parameters of the LDH‐TK enzyme were comparable to those of the free TK. The LDH‐TK enzyme was finally tested for the synthesis of L ‐erythrulose starting from hydroxypyruvate lithium salt (Li‐HPA) and glycolaldehyde (GA) as substrates. L ‐erythrulose was characterized and obtained with an isolated yield of 56% similar to that obtained with free TK. The reusability of the LDH‐TK biohybrid material was then investigated, and we found no loss of enzymatic activity over six cycles.     

Mechanism of formation of urchin-like ZnO

Thin films composed of ZnO nanowires (NWs) hierarchically organized with an urchin-like 3D morphology were obtained by combining the electrochemical deposition and sphere lithography methods. Deposited on a transparent conductive oxide substrate (TCO), a monolayer of carboxylate modified polystyrene spheres organized with a hexagonal closed-packed structure played the role of a template. The spheres were activated in a solution of zinc chloride by the formation of bonds between the carboxylate terminals and the Zn²⁺ ions and were used as a template for the electrodeposition of vertically aligned ZnO NWs around them. Without this treatment, ZnO NWs were deposited only on the TCO substrate between the PS spheres. To reach a density of nanowires high enough to obtain the urchin morphology, the concentration of ZnCl₂ had to be at least equal to 2 M. It was also found, as soon as small grains of ZnO started to be electrodeposited on the polystyrene spheres that the spheres were no longer close packed. The space created between them increased with the increase in the number of small ZnO grains and the increase in their length, allowing the further growth of the nanowires between the spheres. As a result the initial round shape of the spheres was modified and the urchin-like ZnO exhibited an ellipsoidal shape.     

Synthesis and structural characterization of a liquid polyisoprene bearing amidoxime end groups

Azo-bis(isobutyroamidoxime) was synthesized and used as functionalized initiator to prepare a liquid isoprene bearing amidoxime end groups via radical polymerization. The polymer was characterized by FT-IR, Gel Permeation Chromatography and NMR. In particular, the structure of the polymer was investigated using 1D and 2D NMR techniques. The distribution of the different isoprene units (1,4-trans, 1,4-cis, 1,2 and 3,4), as well as the structure of the amidoxime end-groups was determined. It was found that the structure of the end groups was governed by the steric hindrance of the initiator. Only 1,4 and 4,1 functionalized end units were evidenced, with a majority of 4,1 end units.