GaN epitaxial layers prepared on nano-patterned Si(001) substrate

We report the growth of GaN epitaxial layer on Si(001) substrate with nano-patterns prepared by dry etching facility used in integrated circuit (IC) industry. It was found that the GaN epitaxial layer prepared on nano-patterned Si(001) substrate exhibits both cubic and hexagonal phases. It was also found that threading dislocation observed from GaN prepared on nano-patterned Si(001) substrate was significantly smaller than that prepared on conventional unpatterned Si(111) substrate. Furthermore, it was found that we can reduce the tensile stress in GaN epitaxial layer by about 78% using the nano-patterned Si(001) substrate.     

Robotic ICSI (intracytoplasmic sperm injection)

This paper is the first report of robotic intracytoplasmic sperm injection (ICSI). ICSI is a clinical procedure performed worldwide in fertility clinics, requiring pick-up of a single sperm and insertion of it into an oocyte (i.e., egg cell). Since its invention 20 years ago, ICSI has been conducted manually by a handful of highly skilled embryologists; however, success rates vary significantly among clinics due to poor reproducibility and inconsistency across operators. We leverage our work in robotic cell injection to realize robotic ICSI and aim ultimately, to standardize how clinical ICSI is performed. This paper presents some of the technical aspects of our robotic ICSI system, including a cell holding device, motion control, and computer vision algorithms. The system performs visual tracking of single sperm, robotic immobilization of sperm, aspiration of sperm with picoliter volume, and insertion of sperm into an oocyte with a high degree of reproducibility. The system requires minimal human involvement (requiring only a few computer mouse clicks), and is human operator skill independent. Using the hamster oocyte-human sperm model in preliminary trials, the robotic system demonstrated a high success rate of 90.0% and survival rate of 90.7% (n=120).     

Microstructure and texture analysis of narrow copper line versus widths and annealing for reliability improvement

In this article, we focus on the possible influence of interconnect Cu microstructure on electromigration phenomenon. First three annealing conditions were applied on interconnects. Microstructure and texture of copper were characterized by Electron BackScattered Diffraction (EBSD). Then electromigration tests have been carried out on 70 and 150 nm line widths of 45 nm node technology. In both cases no significant difference was observed in term of reliability performance versus annealing conditions. On the contrary large difference is observed on Electron BackScattered Diffraction results. Then, a statistical approach was used to investigate local microstructure and texture of copper for 150 nm line width. The results underline that morphological parameters of copper can vary versus annealing conditions but lead to similar reliability performances. We can thus conclude that these parameters are not in relationship with electromigration phenomena in these interconnects. On the other hand, high amount of misorientation has been highlighted as responsible of early failures.     

Body loadings and health risk assessment of polychlorinated dibenzo-p-dioxins and dibenzofurans at an intensive electronic waste recycling site in China

This study is one of the very few investigating the dioxin body burden of a group of child-bearing-aged women at an electronic waste (e-waste) recycling site (Taizhou, Zhejiang Province) (24 +/- 2.83 years of age, 40% were primiparae) and a reference site (Lin'an city, Zhejiang Province, about 245 km away from Taizhou) (24 +/- 2.35 years of age, 100% were primiparae) in China. Five sets of samples (each set consisted of human milk, placenta, and hair) were collected from each site. Body burdens of people from the e-waste processing site (human milk, 21.02 +/- 13.81 pg WHO-TEQ1998/g fat (World Health Organization toxic equivalency 1998); placenta, 31.15 +/- 15.67 pg WHO-TEQ1998/g fat; hair, 33.82 +/- 17.74 pg WHO-TEQ1998/g dry wt) showed significantly higher levels of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/ Fs) than those from the reference site (human milk, 9.35 +/- 7.39 pg WHO-TEQ1998/g fat; placenta, 11.91 +/- 7.05 pg WHO-TEQ1998/g fat; hair, 5.59 +/- 4.36 pg WHO-TEQ1998/g dry wt) and were comparatively higher than other studies. The difference between the two sites was due to e-waste recycling operations, for example, open burning, which led to high background levels. Moreover, mothers from the e-waste recycling site consumed more foods of animal origin. The estimated daily intake of PCDD/Fs within 6 months by breastfed infants from the e-waste processing site was 2 times higher than that from the reference site. Both values exceeded the WHO tolerable daily intake for adults by at least 25 and 11 times, respectively. Our results implicated that e-waste recycling operations cause prominent PCDD/F levels in the environment and in humans. The elevated body burden may have health implications for the next generation.     

Cooperative localization techniques for wireless sensor networks: free,signal and angle based techniques

This paper addresses the problem of localization in sensor networks where, initially, a certain number of sensors are aware of their positions (either by using GPS or by being hand‐placed) and are referred to as anchors. Our goal is to localize all sensors with high accuracy, while using a limited number of anchors. Sensors can be equipped with different technologies for signal and angle measurements. These measures can be altered by some errors because of the network environment that induces position inaccuracies. In this paper, we propose a family (AT‐Family) of three new distributed localization techniques in wireless sensor networks: free‐measurement (AT‐Free) where sensors have no capability of measure, signal‐measurement (AT‐Dist) where sensors can calculate distances, and angle‐measurement (AT‐Angle) where sensors can calculate angles. These methods determine the position of each sensor while indicating the accuracy of its position. They have two important properties: first, a sensor node can deduce if its estimated position is close to its real position and contribute to the positioning of others nodes; second, a sensor can eliminate wrong information received about its position. This last property allows to manage measure errors that are the main drawback of measure‐based methods such as AT‐Dist and AT‐Angle techniques. By varying the density and the error rate, simulations show that the three proposed techniques achieve good performances in term of high accuracy of localized nodes and less energy consuming while assuming presence of measure errors and considering low number of anchors. Copyright © 2012 John Wiley & Sons, Ltd.     

Two dimensional transport characteristics of surface stabilized zero-valent iron nanoparticles in porous media

Zero-valent iron nanoparticles (INP) were synthesized and stabilized using poly acrylic acid (PAA) to yield stabilized INP (S-INP). A two-dimensional physical model was used to study the fate and transport of the INP and S-INP in porous media under saturated, steady-state flow conditions. Transport data for a nonreactive tracer, INP, and S-INP were collected under similar flow conditions. The results show that unstabilized INP cannot be transported into groundwater systems. On the other hand, the S-INP can be transported like a tracer without significant retardation. However, the S-INP plume migrated downward as it moved horizontally in the physical model, indicating that small density gradients have significant influence on two-dimensional transport. The variable-density groundwater flow model SEAWAT was used to model the observed density-driven transport patterns. This is the first time a two-dimensional transport data set is reported for demonstrating the multidimensional transport characteristics of nanoparticles. The data shows the importance of density effects, which cannot be fully discerned using one-dimensional, column experiments. Finally, we also demonstrate that the numerical model SEAWAT can be used to predict the density-driven transport characteristics of S-INP in groundwater aquifers.     

Cold Atmospheric Plasma Jet Treatment Improves Human Keratinocyte Migration and Wound Closure Capacity without Causing Cellular Oxidative Stress

Cold Atmospheric Plasma (CAP) is an emerging technology with great potential for biomedical applications such as sterilizing equipment and antitumor strategies. CAP has also been shown to improve skin wound healing in vivo, but the biological mechanisms involved are not well known. Our study assessed a possible effect of a direct helium jet CAP treatment on keratinocytes, in both the immortalized N/TERT-1 human cell line and primary keratinocytes obtained from human skin samples. The cells were covered with 200 µL of phosphate buffered saline and exposed to the helium plasma jet for 10–120 s. In our experimental conditions, micromolar concentrations of hydrogen peroxide, nitrite and nitrate were produced. We showed that long-time CAP treatments (≥60 s) were cytotoxic, reduced keratinocyte migration, upregulated the expression of heat shock protein 27 (HSP27) and induced oxidative cell stress. In contrast, short-term CAP treatments (<60 s) were not cytotoxic, did not affect keratinocyte proliferation and differentiation, and did not induce any changes in mitochondria, but they did accelerate wound closure in vitro by improving keratinocyte migration. In conclusion, these results suggest that helium-based CAP treatments improve wound healing by stimulating keratinocyte migration. The study confirms that CAP could be a novel therapeutic method to treat recalcitrant wounds.     

Wein

Ohne Zusammenfassung     

Trink- und Gebrauchswasser

Ohne Zusammenfassung