An automated enzymic micromethod for the measurement of fat in human milk

Most (98%) of the fat in human milk is present as triglycerides. This paper describes the use of a clarification procedure that enables the level of human milk fat to be determined by measurement of glycerol released by enzymic hydrolysis of triglycerides. The method requires only 10-50 microliters milk, thus presenting a possible technique for work with small mammals, and is suitable for use with autoanalysers, permitting rapid sample throughput.     

THE EFFECT OF CATHODIC PROTECTION POTENTIAL ON CORROSION FATIGUE CRACK GROWTH RATE OF AN OFFSHORE STRUCTURAL STEEL

Abstract— Duplicate tests have been performed to determine the effect of cathodic protection potential on corrosion fatigue crack growth rate of a modern offshore structural steel, produced by thermo-mechanically controlled processes. The experiments were carried out using compact tension specimens exposed to artificial seawater at 10°C and subjected to constant amplitude loading at 0.35 Hz. Reproducible results showed that the merits of cathodic protection potentials are strongly dependent on stress intensity ratio R and stress intensity range Δ K . It appears that a specific value of cathodic potential may not give comprehensive protection against corrosion fatigue within the spectrum of variable amplitude loading experienced in service. Fractography showed the initiation of secondary cracks on the fracture surface to be associated with the dissolution of calcium sulphide inclusions, regardless of imposed cathodic potential.     

Bone replacement in head and neck surgery: a biocompatible alternative

BACKGROUND: Defects in the skull have presented difficult reconstructive problems. Recently glass-ionomer cement and preformed. implants have been used to repair bony defects in the skull base and in cranio-facial surgery. Three patients are reported to illustrate possible applications for this new material. METHODS: Ionocap cement and Ionoroc-skull standardized implants have been used. The cement is available as a two component blister pack. When mixed and blended a gel is produced which can be worked for approximately 5 min before hardening. It can then be contoured and drilled to the required shape. The resultant material is biocompatible and biostable, is non-toxic and permanently bonds to bone with no increase in temperature or shrinkage. RESULTS: The material has been used to fill the temporal defect left by transplantation of the temporalis muscle for oral reconstruction, the anterior and lateral walls of the maxilla and following craniofacial resection, the posterior wall of the frontal sinus and anterior skull base. CONCLUSIONS: Three patients with different reconstructive problems have been presented to illustrate the use of an alloplastic material that has a tensile strength similar to bone and firmly adheres to it. The material was found to be safe and easy to use. All three patients have now been followed for 12 months with no adverse affects.     

A painful inflammation of the thyroid

Four women aged 30, 29, 52 and 43 years presented with what appeared to be subacute thyroiditis (De Quervain's thyroiditis). This disease is characterized by fatigue, a painful thyroid gland and thyrotoxic manifestations. The diagnosis is further based on a high erythrocyte sedimentation rate and low tracer uptake during thyroid scintigraphy. Only the first patient showed a typical course. In the second and third ones the painful thyroid was associated with nodular enlargement. Fine needle aspiration cytology was at first consistent with subacute thyroiditis but a repeated aspiration showed papillary carcinoma in the second and anaplastic carcinoma in the third patient. In the fourth one, subacute thyroiditis was accompanied by normochromic anaemia, a low serum albumin concentration and liver function disorders. She made a full recovery without treatment. Thyroid malignancies can mimic subacute thyroiditis. Persistent nodular enlargement of the thyroid is suspicious and requires careful investigation.     

Metal-matrix composites in the automotive industry: Opportunities and challenges

Metal-matrix composites offer considerable promise to help automotive engineers meet the challenges of current and future demands for recyclable, fuel-efficient, safe, and low-emission vehicles. These materials can be engineered to match the design requirements of automotive power-train or chassis components. Technological and infrastructural barriers tend to limit the implementation of these materials, but it is believed these barriers can be overcome and that metal-matrix composites can be applied in high-volume vehicle production. Reducing these barriers will require much effort by engineers and scientists, managers and planners at automotive manufacturers, and their suppliers. The result will be the gradual introduction of metal-matrix composites in high-volume vehicle production to satisfy customer desires while meeting regulatory requirements and competitive pressures.     

Biaxial deformation of polyamide‐6: Assessment of orientation by means of infrared trichroism

Infrared spectroscopy was used to study the evolution of structure in films of polyamide‐6 drawn on a Cellier tenter frame laboratory tester under conditions of simultaneous equibiaxial stretching and planar uniaxial stretching. The “tilted film” method was used to obtain trichroic spectra corresponding to the machine, transverse, and normal directions, as well the “structural factor” spectrum. From these it was possible to obtain information on the molecular orientation and the evolution of the crystalline structure. The starting films, prepared by melt casting from an extruder on a chilled roll, contained predominantly the mesomorphic β form. The structural factor spectra confirmed that strain‐induced transformation into the α form occurred upon drawing, and that the amount of α form increased with the extent of drawing. The trichroic spectra showed that the molecular orientation was localized mainly, but not exclusively, in the α form. Orientation functions could be determined for both the molecular chain axis and the normal to the hydrogen‐bonded sheets. For both the equibiaxial and planar uniaxial films, these sheets were found to be strongly oriented parallel to the plane of the film, with the degree of orientation increasing with overall draw ratio. For the biaxial samples, the molecular chain orientation was found to be equibiaxial, as expected. Mechanical test results indicated that the chains are evenly distributed in the film plane rather than showing a preference for the two orthogonal draw directions. For the planar uniaxial samples, the chain orientation was predominantly in the draw direction, but some degree of orientation in the transverse direction was also observed. The variation of orientation functions with draw ratio suggested that the α structure evolves in two stages, the first involving chain orientation in the draw direction and the second involving rotation of the sheets into the plane of the film.