The molecular weight distribution and oligomers of sodium hydroxide hydrolyzed poly(ethylene terephthalate)

Methanolic sodium hydroxide reacted more quickly than aqueous sodium hydroxide with poly(ethylene terephthalate) (PET). Larger amounts of low molecular weight deposits were formed at the product surface after the former treatment, also indicating the severity of this attack. The molecular weight distribution, obtained by gel permeation chromatography for the product of methanolic NaOH hydrolysis, had a population with 2400 peak molecular weight, which was not present on the chromatograph of the aqueous sodium hydroxide hydrolyzed product. This population is hypothesized to have been crystalline material. Extraction and analysis by high performance liquid chromatography of the low molecular weight products on the surface and in the bulk of the hydrolyzed PET samples, in comparison to controls, revealed the presence of more oligomeric species after hydrolysis. Also, more oligomeric species were present in the bulk extract of the methanolic sodium hydroxide hydrolyzed sample than in the aqueous NaOH hydrolyzed product.     

Performance of Methanol Oxidation Catalysts with Varying Pt:Ru Ratio as a Function of Temperature

This paper describes the effects of varying the Pt to Ru ratio in carbon-supported catalysts for methanol oxidation as a function of temperature. Previously these effects were studied in isolation, but now it is shown that the composition of a given catalyst as a function of temperature is extremely important for its activity towards methanol oxidation. Platinum rich 3:2 atomic ratio catalysts perform better than a 1:1 catalyst at 25 °C, where only Pt is believed to be active towards methanol dehydrogenation, since this process is a highly thermally activated process on Ru sites. This result is reversed at 65 °C, where the 1:1 catalyst displays much higher currents across the entire range of polarization. This may result from methanol dehydrogenation occurring on both Ru and Pt sites at higher temperatures. At an intermediate temperature, 45 °C, the 3:2 catalyst is seen to perform better at lower current values, while the 1:1 catalyst is superior at higher current densities, with the crossover occurring at 62 A g^–1. As a consequence, when designing fuel cell catalysts, the composition of the catalyst employed should be tailored with respect to the exact operating conditions, in order to promote optimum fuel cell performance.     

Carbon molecular sieve films produced by dc sputtering

This paper reports adsorption measurements that show molecular sieve effects in amorphous hydrogenated carbon (a-C : H) films deposited by d.c. magnetron discharge decomposition of acetylene. Adsorption of organic gases on the films is studied by using a quartz crystal microbalance technique. The sieve effect in this material depends on both deposition and annealing conditions. Films having significant molecular sieve effects are found to be typically microporous and to have a very small characteristic micropore dimension. It is suggested that the d.c. sputtered a-C : H film may be useful as a molecular sieve material in selective adsorption and gas permeation studies.     

Verification of Knowledge Assets in Electronic Repositories: Expert- and Community-Governance

Two mechanisms that verify knowledge contributions in electronic repositories are expert-governance and community-governance. Our goal is to examine repository users' perceptions of the conditions under which these mechanisms verify knowledge contributions. Qualitative data show that perceived credibility of experts, perceived ownership of content, and experts' (meticulous) execution of governance functions are salient for expert-governance, and the perceived involvement of community members, and community members' (continuous and collective) execution of governance functions are important for community-governance.     

Model-based 3-D segmentation of multiple sclerosis lesions in magnetic resonance brain images

Human investigators instinctively segment medical images into their anatomical components, drawing upon prior knowledge of anatomy to overcome image artifacts, noise, and lack of tissue contrast. The authors describe: 1) the development and use of a brain tissue probability model for the segmentation of multiple sclerosis (MS) lesions in magnetic resonance (MR) brain images, and 2) an empirical comparison of the performance of statistical and decision tree classifiers, applied to MS lesion segmentation. Based on MR image data obtained from healthy volunteers, the model provides prior probabilities of brain tissue distribution per unit voxel in a standardized 3-D "brain space". In comparison to purely data-driven segmentation, the use of the model to guide the segmentation of MS lesions reduced the volume of false positive lesions by 50-80%     

Tennessee's failed managed care program for mental health and substance abuse services

In July 1996, Tennessee initiated a managed mental health and substance abuse program called TennCare Partners. This publicly funded "carve-out" experiment started chaotically and soon deteriorated into a crisis. Many patients did not receive care or lost continuity of care, and the traditional "safety net" mental health system nearly disintegrated. This qualitative case study sought to ascertain the impact of the TennCare Partners program. It points out that the program's difficulties stemmed directly from a flawed design that spread funds previously earmarked for severely mentally ill patients across the entire Medicaid population. States contemplating similar reforms should strive to protect vulnerable patients by risk-adjusting capitation payments and by focusing resources on care for severely mentally ill persons. States should also minimize program complexity and ensure the accountability of managed care networks for their patients' behavioral health care needs.     

Protein kinase C modulates estrogen receptors in differentiated osteoblastic cells in vitro

Ventriculo-peritoneal shunts (VPS) are the most frequent operative procedures used to treat hydrocephalic children. Abdominal complications of VPS are now a rare event; however, their frequency varies from 5% to 47% according to reports. Anything that causes an obstruction or impediment of the VP derivation system will lead to intracranial hypertension, which requires immediate surgery. From 1985 to 1995 at the Division of Pediatric Surgery of the Federico II University of Naples, ten laparoscopies were performed in ten children with VPS complications. Cerebrospinal fluid pseudocysts were found in four infants. There was one case of abdominal wall perforation by the tip of the catheter at the umbilical level, two bowel obstructions, and one catheter was lost in the abdominal cavity. Finally, two children had malfunctioning of the peritoneal limb of the catheter. The laparoscopic technique was curative in all ten cases, thus avoiding a conventional laparotomy and the consequent risk of adhesions, which could cause further complications.     

Atmospheric pressure microwave sample preparation procedure for the combined analysis of total phosphorus and kjeldahl nitrogen

An atmospheric pressure microwave digestion method has been developed for the combined analysis of total phosphorus and Kjeldahl nitrogen in complex matrices. In comparison to the digestion steps in EPA Methods 365.4 (total phosphorus) and 351.x (Kjeldahl nitrogen), this method requires less time, eliminates the need for a catalyst, and reduces the toxicity of the waste significantly. It employs a microwave-assisted digestion step, using refluxing borosilicate glass vessels at atmospheric pressure. Traditionally, this method has a time-consuming sample preparation step and generates toxic waste through the use of heavy metal catalysts. These advantages are gained by the combination of a high boiling point acid (sulfuric acid) and the application of focused microwave irradiation, which enhances the digestion process by direct energy coupling. NIST standard reference materials 1572 (citrus leaves), 1577a (bovine liver), and 1566 (oyster tissue) and tryptophan were analyzed to validate the method. Phosphorus concentrations were determined by the colorimetric ascorbic acid method outlined in EPA Method 365.3. Kjeldahl nitrogen concentrations were determined using EPA Method 351.1. The results of the analyses showed good precision and are in excellent agreement with the NIST published values for both elements.     

Laparoscopic versus open appendectomy

BACKGROUND: Clinical manifestations and course of sickle-cell anemia are variable. Knowledge about the factors, possibly geographic, that influence prognosis are still scanty. POPULATION AND METHODS: Data of hospitalization and management of children with sickle-cell disease were studied during two years (1992-1993) in the Pediatric Unit of Libreville Hospital. They concerned 205 admissions of 171 children and 131 outpatients. RESULTS: The main causes of hospitalization were: acute anemia (36 cases before the age of 5 years); painful crisis whose frequency increased with age (23% before 5 years, 35% between 5 and 10, 42% after 10 years); infections, essentially pulmonary occurring early, and bone infections at any age. Eight children died (because a complication of their disease). Among the 131 outpatients, half were detected because pyrexia, anemia and/or more often "hand-foot syndrome". More than 60% had hepatomegaly, one third still had splenomegaly after five years of age and more than one third was icteric. More than half children older than ten years had growth disorders. Mean hemoglobin level was 7 g/dL. 21 of the 83 tested children for HBsAg were positive and only one out of 79 was positive for HIV. CONCLUSIONS: Clinical manifestations and course of sickle-cell anemia in our patients are similar to those reported in Congolese children. Genetic and environmental factors may be responsible for differences with children from other, in particular French, cohorts.     

A simple model for laser drilling

A simple mathematical model of laser drilling is proposed. Assuming axi-symmetry of the process around the axis of the laser beam, a one-dimensional formulation is obtained after cross-sectional averaging. The novelty of the approach relies on the fact that even after dimension reduction, the shape of the hole can still be described. The model is derived, implemented and validated for drilling using lasers with intensities in the GW/cm² range and microsecond pulses.