Maternal Flaxseed Oil During Lactation Enhances Bone Development in Male Rat Pups

Flaxseed oil is an alpha linolenic acid source important in the growth and body development stage; furthermore, this acid acts on adipose tissue and bone health. The aim of this study was to evaluate body composition, fatty acid composition, hormone profile, retroperitoneal adipocyte area and femur structure of pups at weaning, whose mothers were fed a diet containing flaxseed oil during lactation. After birth, pups were randomly assigned: control (C, n = 12) and flaxseed oil (FO, n = 12), rats whose mothers were treated with diet containing soybean or flaxseed oil. At 21 days, the pups were weaned and body mass, length, body composition, biochemical parameter, leptin, osteoprotegerin, osteocalcin, fatty acids composition, intra‐abdominal fat mass and femur structure were analyzed. FO showed (p < 0.05): higher body mass (+12 %) and length (+9 %); body fat mass (g, +45 %); bone mineral density (+8 %), bone mineral content (+55 %) and bone area (+35 %), osteocalcin (+173 %) and osteoprotegerin (+183 %). Arachidonic acid was lower (p < 0.0001), alpha‐linolenic and eicosapentaenoic were higher (p < 0.0001). Intra‐abdominal fat mass was higher (+25 %), however, the retroperitoneal adipocytes area was lower (?44 %). Femur mass (+10 %), distance between epiphyses (+4 %) and bone mineral density (+13 %) were higher. The study demonstrates that adequate flaxseed oil content during a lactation diet plays an important role in the development of pups.     

trans Fatty Acids in Colostrum,Mature Milk and Diet of Lactating Adolescents

The purpose of this study was to investigate the trans fatty acids (TFA) content and distribution in colostrum, mature milk, and diet of adolescent mothers, after TFA declaration in food labels became mandatory in Brazil. Participants were healthy adolescents (n 54, 15–19 years, 1–90 days postpartum) practicing exclusive breastfeeding. Milk samples were collected 3 days after delivery (colostrum) and in the third month postpartum (mature milk) by hand expression. The fatty acid composition of the milk samples was determined by gas chromatography. TFA intake corresponded to 1.23 % of total energy value. Total 18:2 TFA accounted for less than 0.5 % of the energy intake. The amount of total 18:1 TFA (mean ± SEM) was 1.9 % ± 0.14 in colostrum and 1.5 % ± 0.2 in mature milk. The total content of n‐3 PUFA was inversely correlated with the total content of 18:1 TFA in colostrum. Both in colostrum and in mature milk, vaccenic acid (11t‐18:1) was found to be the most abundant 18:1 trans isomer, followed by elaidic acid (9t‐18:1), whereas rumenic acid (9c,11t‐18:2 CLA) was the predominant 18:2 trans isomer. In conclusion, the levels of TFA of industrial sources found in the mother's diet and breast milk (colostrum and mature milk) showed a decrease in relation to those observed in studies conducted prior to the TFA labeling resolution in Brazil. However, the current low intake levels of n‐3 LCPUFA and DHA content in the milk of lactating adolescents may be insufficient for supporting adequate neurological development of the infants.     

Metformin Reduces Lipogenesis Markers in Obese Mice Fed a Low-Carbohydrate and High-Fat Diet

Lipogenesis is the process by which fatty acids are synthesized. In metabolic syndrome, an insulin resistant state along with high plasma levels of free fatty acids (FFA) and hyperglycemia may contribute to the lipogenic process. The aim of the present study was to investigate the effects of oral administration of metformin on the expression of lipogenic genes and glycemic profile in mice fed with low‐carbohydrate high‐fat diet by evaluating their metabolic profile. SWISS male mice were divided into 4 groups (N = 7) that were fed with standard (ST), standard plus metformin (ST + MET), low‐carbohydrate high‐fat diet (LCHFD) and low‐carbohydrate high‐fat diet plus metformin (LCHFD + MET) (100 mg kg^?1 diet) diets respectively. Food intake, body weight and blood parameters, such as glucose tolerance, insulin sensitivity, glucose, HDL‐c, total cholesterol, triglycerides, ASL and ALT levels were assessed. Histological analyses were performed on hematoxylin and eosin‐stained epididymal adipose tissue histological specimens. The expression levels of peroxisome proliferator‐activated receptor (PPARγ), sterol regulatory element‐binding protein 1 (SREBP1), fatty acid synthase (FAS) and acetyl‐CoA carboxylase (ACC), were assessed by RT‐PCR. This study showed that metformin decreased adipocyte area, body weight and food consumption in obese animals when compared to the standard group. Furthermore, the expression of lipogenic markers in adipose tissue were diminished in obese animals treated with metformin. This data showed that oral administration of metformin improved glucose and lipid metabolic parameters in white adipose tissue by reducing the expression of lipogenesis markers, suggesting an important clinical application of MET in treating obesity‐related diseases in metabolic syndrome.     

Characterization of Crude and Partially Purified Lipase from Geotrichum candidum Obtained with Different Nitrogen Sources

Lipases from Geotrichum candidum were produced in two different medium: A = 12 % (w/v) clarified corn steep liquor (CCSL) + 0.6 % (w/v) soybean oil (SO) and B = 3.5 % (w/v) yeast hydrolysate (YH) + 0.7 % (w/v) SO. Lipases were partially purified from both media by hydrophobic interaction chromatography using 3.0 mol L^?1 of NaCl as mobile phase, and they were characterized in the crude and partially purified forms. The recovery of lipase activity from CCSL and YH via HIC were 96 and 94.3 %, and the purification factors were 44.3 and 86.7‐fold, respectively. All evaluated lipases had similar optimum pH (7.0–7.7), but, for the CCSL crude lipase, optimum temperature (47 °C) was 10 °C higher than others lipases evaluated. CCSL crude lipase possessed a higher thermo stability than YH crude lipase, e.g., at 37 °C (pH 7.0) the half‐life of CCSL crude lipase was 19.25 h and at pH 8.0 (30 °C) the half‐life was 48 h, which are five and ten times higher than with YH crude lipase, respectively. On the other hand, the YH crude lipase possessed a higher catalytic constant (k_cat = 2.3 min^?1) but with almost the same catalytic efficiency (K_m/k_cat = 32.12 mg mL min^?1) in relation to CCSL crude lipase. The lipases differ in biocatalytic properties between substrates, suggesting that the two lipases can be employed for different applications.     

228Ra in cow’s milk from an anomalous region of Pernambuco-Brazil

The counties of Pedra and Venturosa have one of the largest natural radioactive occurrences of Brazil. The large farms producing milk in the state of Pernambuco are located in these counties. The forage plants cultivated on those farms have high concentrations of ²²⁸Ra, a naturally occurring descending radionuclide from the ²³²Th series. The ²²⁸Ra is transferred to the forage plants, and once ingested by the lactating cow, this radionuclide is rapidly transferred to the milk. Thus, milk intake is an important route for ²²⁸Ra of incorporation by the human consumer and may induce the appearance of bone sarcoma. Accordingly, the aim of the present study was to determine the concentrations of ²²⁸Ra in milk produced in the Pedra and Venturosa farms, in order to estimate the risk of ingestion in the local population. The ²²⁸Ra was determined by actin-228 (²²⁸Ac) using the radiochemical technique of barium sulphate precipitate (BaSO₄). The milk samples had concentrations of ²²⁸Ra ranging from 61 to 1338 mBq.l^?1, which corresponded to the cumulative equivalent dose ranging from 0.04 to 0.1 Sv. Although the doses were low, regulatory and protective measures should be taken to study the radiotoxic effects of ²²⁸Ra in subjects in the public.     

Partial replacement of EPDM by GTR in thermoplastic elastomers based on PP/EPDM: Effects on morphology and mechanical properties

The formulation of recycled thermoplastic elastomeric materials (TPE) based on ground tyre rubber (GTR), generated from end of life tyres, can be an alternative strategy to deal with a type of waste responsible for increasingly environmental problems over the past decades. The incompatibility of GTR with thermoplastics places several issues on the formulation of these materials, which this study tries to overcome. An encapsulation strategy of the GTR by an elastomeric phase is proposed in this work to overcome the lack of adhesion between the materials. Ternary blends, composed of a highly flowable polypropylene homopolymer, an ethylene propylene diene monomer (EPDM) and GTR were formulated and their morphology and mechanical properties analyzed. The morphology of the blends showed interaction between the materials, revealing that the encapsulation of GTR by a rubber phase can be an adequate strategy to formulate recycled‐based TPE materials, if the dimension of the GTR particles is controlled and taken into consideration. The mechanical properties revealed the replacement effect of EPDM by GTR, and its dependence on the amount of that replacement. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40160.     

Spray Drying of Green Corn Pulp

Maize (Zea mays) is a cereal grown in Brazil, and its availability is limited to the harvest season. An alternative processing route is based on the production of green corn powder, which has a longer shelf-life and increased versatility. This study aimed to evaluate the influence of drying conditions on the physical characteristics, size, and morphology of green corn powder. Drying experiments were performed on a spray dryer according to a central composite rotational design to evaluate inlet air temperature, feed flow rate, and pulp concentration. The yield of dried pulp corn had an average value of 36.19%. The following mean values for the physical properties of the powder were measured: solubility of 94.37 g/100 g, wettability of 128.05 seconds, moisture content of 1.97%, water activity of 0.13, density of 0.79 g/mL, and a particle diameter of 31.02 µm. The powder was also yellow with less intensity, and the particle surface was smooth at higher temperatures and had a tendency to form agglomerates. The estimated optimal conditions for spray drying were 48% (w/w) pulp concentration, 172°C inlet air temperature, and feed flow rate of 0.56 L/h.     

Solid Tumors and Kinase Inhibition: Management and Therapy Efficacy Evolution

The increasing numbers of cancer cases worldwide and the exceedingly high mortality rates of some tumor subtypes raise the question about if the current protocols for cancer management are effective and what has been done to improve upon oncologic patients’ prognoses. The traditional chemo-immunotherapy options for cancer treatment focus on the use of cytotoxic agents that are able to overcome neoplastic clones’ survival mechanisms and induce apoptosis, as well as on the ability to capacitate the host’s immune system to hinder the continuous growth of malignant cells. The need to avert the highly toxic profiles of conventional chemo-immunotherapy and to overcome the emerging cases of tumor multidrug resistance has fueled a growing interest in the field of precision medicine and targeted molecular therapies in the last couple of decades, although relatively new alternatives in oncologic practices, the increased specificity, and the positive clinical outcomes achieved through targeted molecular therapies have already consolidated them as promising prospects for the future of cancer management. In recent years, the development and application of targeted drugs as tyrosine kinase inhibitors have enabled cancer treatment to enter the era of specificity. In addition, the combined use of targeted therapy, immunotherapy, and traditional chemotherapy has innovated the standard treatment for many malignancies, bringing new light to patients with recurrent tumors. This article comprises a series of clinical trials that, in the past 5 years, utilized kinase inhibitors (KIs) as a monotherapy or in combination with other cytotoxic agents to treat patients afflicted with solid tumors. The results, with varying degrees of efficacy, are reported.