Use of laser interferometers for measuring displacements of the surfaces of tested objects

A mathematical model and the results of the numerically simulated procedures of measuring displacements of tested objects’ surfaces with the use of laser interferometers are presented. Promising measurement techniques are substantiated, and recommendations for their use are given.     

Rapidly tunable optical add-drop multiplexer utilising relaxed beam splitters

A polarisation-independent four-port electro-optic tunable filter in the 1530 nm wavelength regime utilising non-polarising relaxed beam splitters and strain-induced polarisation converters on LiNbO₃ with 16 nm tuning range and 46 ns tuning speed is reported.     

Formation of cube texture in nickel-palladium alloys for epitaxial substrates for deposition of high-temperature superconductors

The texture, structure, and magnetic and mechanical properties of thin ribbons of nickel-palladium alloys have been studied. It has been demonstrated that in Ni₉₄Pd₆ and Ni_92.5Pd₅W_2.5 alloys, a sharp cube texture can be formed that is stable up to rather high annealing temperatures. Segregation of palladium atoms to surface layers of ribbons has been found, which gives additional advantages for using these ribbons as substrates for epitaxial deposition of high-temperature superconductors.     

Surface tension isotherms of a free surface and grain boundaries in the Cu-Sn system

Surface tension of pure copper and its alloys with Sn has been measured at 1000°C in a hydrogen atmosphere. Surface tension of a free surface equaled 1.81 N/m for pure copper, and 1.55, 1.38, and 1.28 N/m for the alloys with 0.05, 0.22, and 0.33 at % Sn, respectively; surface tension at grain boundaries equaled 0.5 N/m for pure copper, and 0.36, 0.3, and 0.23 N/m for the alloys, respectively. Based on these data, the concentration dependence of tin absorption at a free surface and grain boundaries has been calculated. Parameters of Sn absorption at grain boundaries and a free surface of copper have been compared with those of Sb and Bi.     

Electrical properties and positron annihilation study of (Ba<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Ho<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>)TiO<Subscript>3</Subscript> ceramics

DC resistivity, dielectric constant, dielectric loss and positron annihilation spectra of (Ba_1−x Ho _x )TiO₃ ceramics have been measured as a function of holmium concentration x. It has been found that the DC resistivity of (Ba_1−x Ho _x )TiO₃ is strongly dependent on the Ho content: it decreases three orders of magnitude and reaches a minimum at x = 0.4%. Doping with 0.6% holmium increases the permittivity of BaTiO₃ by approximately three times (from ∼1,300 to ∼4,000), with only a slight increase in the corresponding dielectric loss. The local electron density and defect concentration estimated using positron annihilation technique conforms well to the features found in the dielectric and resistivity measurements. The results have been discussed in terms of a mixed compensation model.     

Laser scanning path generation considering photopolymer solidification in micro-stereolithography

It is essential to automate the scanning path generation process to effectively implement the micro-stereolithography. However, a scanning path that is generated based only on a 3D CAD model introduces dimensional inaccuracies. In micro-stereolithography, the photopolymer solidification is affected by fabrication conditions, such as the optical properties (laser power, laser scanning speed, laser scanning pitch focusing condition, etc.) and material properties of the photopolymer. Thus, the photopolymer solidification phenomena must be considered when generating a laser scanning path. In this paper, a scanning path generation algorithm that uses 3D CAD data and considers the photopolymer solidification phenomena is proposed to improve the dimensional accuracy in micro-stereolithography. Multi-line photopolymer solidification experiments were performed for various laser scanning conditions to examine the photopolymer solidification phenomena. From these experiments, linear relations between the solidification length (width) and scanning length (width) were acquired and stored in a database. Subsequently, these data were utilized to compensate the scanning path of the laser beam. In addition, experiments for determining the layer thickness in the z-direction were performed and these results were also used in the scanning path generation algorithm.This research was supported by the Highly Advanced National Project (http://www.most.go.kr), which performs some of the National R&D Program, and sponsored by the Korean Ministry of Science and Technology under the contract project code M10214000116-02B1500-02010.     

Optimization of Vane-Parameters for Gain-Frequency Response of Vane-Loaded Gyro-TWT

This paper discusses an analytical method to study the effects of the vane-parameters on the gain-frequency response of an azimuthally periodic vane-loaded cylindrical waveguide interaction structure for the gyro-traveling wave tube (gyro-TWT) amplifier in the small-orbit TE₀₁ waveguide mode configuration. The vane-loaded gyro-TWT enables the higher gain than that of the smooth-wall device. An optimum choice of the vane dimensions causes a change in the frequency corresponding to the peak-gain.     

An Effect of Nonferromagnetic Gaps on the Magnetic Properties of Stacks of Steel Plates with Different Values of Magnetic Hardness: I. A Closed Circuit

Stacks of steel plates having different values of magnetic hardness and separated with nonferromagnetic gaps are investigated. The coercive force and the residual magnetic induction of a stack measured in a closed magnetic circuit depend on the layout of the plates in the stack and on the thickness of nonmagnetic gaps between them.__________Translated from Defektoskopiya, Vol. 41, No. 3, 2005, pp. 55–62.Original Russian Text Copyright © 2005 by Gorkunov, Mitropol’skaya, Povolotskaya.Dedicated to the Anniversary of the 100th Birthday of Corresponding Member of the Russian Academy of Sciences M. N. Mikheev     

Inspection of the Strength Characteristics and Heat-Treatment Quality of Ferromagnetic Articles Based on Parameters of the Residual-Magnetization Hysteresis Loop upon Their Local Magnetization and Magnetization Reversal in a Pulsed Magnetic Field with a Variable Amplitude: I. Parameters of the Hysteresis Loop

Results of an experimental study of the anomalous behavior of the residual-magnetization hysteresis of ferromagnetic articles that, under local magnetization and magnetization reversal in a pulsed magnetic field with a variable amplitude, were subjected to heat treatment under different conditions are reported. Parameters of the hysteresis and their dependence on the magnetization and magnetization-reversal conditions, as well as on the magnetic properties of a material, are considered.__________Translated from Defektoskopiya, Vol. 41, No. 5, 2005, pp. 3–13.Original Russian Text Copyright © 2005 by Matyuk, Mel’gui, Pinchukov, Lyubarets.All papers in this issue are devoted to the 100th anniversary of the birth of the late M.N. Mikheev, corresponding member of the Russian Academy of Sciences and one of the founders of magnetic structural analysis.