Effect of nano‐silica filler on the rheological and morphological properties of polypropylene/liquid‐crystalline polymer blends

A fumed hydrophilic nano‐silica‐filled polypropylene (PP) composite was blended with a liquid‐crystalline polymer (LCP; Rodrun LC5000). The preblended polymer blend was extruded through a capillary die; this was followed by a series of rheological and morphological characterizations. The viscosity of the PP matrix increased with the addition of the hydrophilic nano‐silica. At shear rates between 50 and 200 s^?1, the composite displays marked shear‐thinning characteristics. However, the incorporation of LC5000 in the PP composite eliminated the shear‐thinning characteristic, which suggests that LC5000 destroyed the agglomerated nano‐silica network in the PP matrix. Although the viscosity ratio of LCP/PP was reduced after the addition of nano‐silica fillers, the LCP phases existed as droplets and ellipsoids. The nano‐silicas were concentrated in the LC5000 phase, which hindered the formation of LCP fibers when processed at high shear deformation. We carried out surface modification of the hydrophilic nano‐silica to investigate the effect of modified nano‐silica (M‐silica) on the morphology of the PP/LC5000 blend system. Ethanol was successfully grafted onto the nano‐silica surface with a controlled grafting ratio. The viscosity was reduced for PP filled with ethanol‐M‐silica when compared to the system filled with untreated hydrophilic nano‐silica. The LC5000 in the (PP/M‐silica)/LC5000 blend existed mainly in the form of fibrils. At high shear rates (e.g., 3000 s^?1), the LC5000 fibril network was formed at the skin region of the extrudates. The exclusion of nano‐silica in the LC5000 phase and the increased viscosity of the matrix were responsible for the morphological changes of the LCP phase. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1484–1492, 2003     

Synthesis and thermotropic liquid‐crystalline behavior of novel main‐chain poly(aryl ether ketones)

Novel aromatic poly(ether ketones) containing bulky lateral groups were synthesized via nucleophilic substitution reactions of 4,4′‐biphenol and (4‐chloro‐3‐trifluoromethyl)phenylhydroquinone (CF‐PH) with 1,4‐bis(p‐fluorobenzoyl)benzene. The copolymers were characterized by differential scanning calorimetry (DSC), wide‐angle X‐ray diffraction, and polarized light microscopy observation. Thermotropic liquid‐crystalline behavior was observed in the copolymers containing 40, 50, 60, and 70 mol % CF‐PH. The crystalline–liquid‐crystalline transition [melting temperature (T_m)] and the liquid‐crystalline–isotropic phase transition appeared in the DSC thermograms, whereas the biphenol‐based homopolymer had only a melting transition. The novel poly(aryl ether ketones) had glass‐transition temperatures that ranged from 143 to 151°C and lower T_m's that ranged from 279 to 291°C, due to the copolymerization. The polymers showed high thermal stability, and some exhibited a large range in mesophase stability. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1347–1350, 2003     

Ⅱ型加载条件下疲劳裂纹扩展试验研究

对４种金属材料在Ⅱ型加载条件下的疲劳裂纹扩散行为进行的试验研究表明：在Ⅱ型加载条件下，裂纹可能仍沿Ⅱ型方向继续扩展，亦可能发生分支转变成Ⅰ型甚至Ⅰ＋Ⅱ型扩展，主要取决于材料本身的性质和它们的微观结构以及应力水平。当裂纹仍沿Ⅱ型方向扩展时，其扩展速率比相当应力水平的Ⅰ型裂纹扩展速率要大得多。     

有机硫加氢(HDS)催化剂的预硫化

预硫化是HDS、HDN过程中决定催化剂活性的最重要环节。在分析催化剂硫化反应原理、硫化条件、硫化与还原的关系等基础上进一步指出了在工业过程中预硫化的一些原则。     

PP/纳米级CaCO_3复合材料的研究

研究了纳米级CaCO3填充粒状、粉状PP复合材料的力学性能,并用SEM观察纳米级碳酸钙在PP中的分散状态及用SALS分析了其结晶行为。结果表明,粉状PP更有利于纳米级碳酸钙在PP中的分散,并具有更好的加工性能、力学性能。同时纳米级碳酸钙改性PP的SALS图像变得弥散、模糊,PP球晶变得不完善,晶粒更小。     

研磨设备的研磨效率与不同研磨方式对涂膜性能的影响

讨论了影响和提高研磨效率的因素，主要探讨了砂磨机和球磨机的研磨效率和不同研磨方式对涂膜性能的影响；着重研究了篮式砂磨机和球磨机这两种研磨方式在涂料耐磨性方面的差别，以及篮式砂磨机砂子填充量对研磨效率的影响。     

Shape‐memory polyurethane/multiwalled carbon nanotube fibers

Shape‐memory polyurethane/multiwalled carbon nanotube (SMP–MWNT) composites with various multiwalled carbon nanotube (MWNT) contents were synthesized, and the corresponding SMP–MWNT fibers were prepared by melt spinning. The influence of the MWNT content on the spinnability, fracture morphology, thermal and mechanical properties, and shape‐memory behavior of the shape‐memory polymer was studied. The spinning ability of SMP–MWNTs decreased significantly with increasing MWNT content. When the MWNT content reached 8.0 wt %, the fibers could not be produced because of the poor rheological properties of the composites. The melt‐blending, extrusion, and melt‐spinning processes for the shape‐memory fiber (SMF), particularly at low MWNT contents, caused the nanotubes to distribute homogeneously and preferentially align along the drawing direction of the SMF. The crystallization in the SMF was promoted at low MWNT contents because it acted as a nucleation agent. At high MWNT contents, however, the crystallization was hindered because the movement of the polyurethane chains was restricted. The homogeneously distributed and aligned MWNTs preserved the SMF with high tenacity and initial modulus. The recovery ratio and recovery force were also improved because the MWNTs helped to store the internal elastic energy during stretching and fixing. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

面向Deep Web的Ajax查询接口技术研究

Deep Web网站采用Ajax技术后使得获取其数据信息更加困难。查询接口处理是获取Deep Web数据的关键步骤,针对采用Ajax技术的Deep Web查询接口,建立Ajax分析处理模型,解决传统爬虫无法完成表单提交的困难,从而获取到更多的Deep Web数据。实验结果证实,该方法是有效的。     

混凝土内钢绞线的蚀坑形状及分布特征

为研究预应力钢筋的锈蚀特性,在自然气候条件下,采用内掺盐的方式,进行了混凝土内钢绞线的锈蚀实验．实验结果表明：钢绞线的蚀坑形状可抽象为2种典型形状,即椭球形和马鞍形;随着锈蚀率增大,蚀坑总个数增大,椭球形蚀坑出现的概率呈先增后减趋势;马鞍形蚀坑出现概率呈先减后增趋势,但变化幅度都不大;蚀坑的长度、宽度、深度都较好地呈对数正态分布．     

自传体记忆的本土文化心理学取向研究路径

自传体记忆是人类“活”的记忆,是不同文化背景下的个体对于自身发展目标以及个体同周围环境关系的期望,反映不同文化背景甚至是不同的亚文化背景下的个体的性格特征、自我表征及文化认同。自传体记忆同文化相互影响,相互作用。基于对心理学本土化和结合中国具体国情的考虑,通过对自传体记忆进行区域跨文化和时代跨文化的比较研宄,从而促进心理学的本土人,促进国民心理和谐建设与和谐社会建设。