The microstructure of Cu films deposited by the self-ion assisted technique

The microstructures of Cu films deposited by the self-ion assisted, partially ionized beam (PIB) deposition technique under two different accelerating potentials, 0 KeV and 6 KeV, are compared. The 6 KeV film shows a bimodal (111) fiber and (100) fiber texture with an abundance of twin boundaries and a relatively large average grain size with a typical lognormal distribution. The 0 KeV film consists of small, mostly (111) oriented grains with islands of abnormally large (100) grains. The controlling factors for the abnormal growth of the (100) grains are discussed in relation to the observed microstructures, showing that all factors necessary for abnormal (100) growth are present in the films.     

Containerless solidification of highly undercooled mullite melts: Crystal growth behavior and microstructure formation

A mullite (3Al₂O₃·2SiO₂) sample has been levitated and undercooled in an aero-acoustic levitator, so as to investigate the solidification behavior in a containerless condition. Crystal-growth velocities are measured as a function of melt undercoolings, which increase slowly with melt undercoolings up to 380 K and then increase quickly when undercoolings exceed 400 K. In order to elucidate the crystal growth and solidification behavior, the relationship of melt viscosities as a function of melt undercoolings is established on the basis of the fact that molten mullite melts are fragile, from which the atomic diffusivity is calculated via the Einstein-Stokes equation. The interface kinetics is analyzed when considering atomic diffusivities. The crystal-growth velocity vs melt undercooling is calculated based on the classical rate theory. Interestingly, two different microstructures are observed; one exhibits a straight, faceted rod without any branching with melt undercoolings up to 400 K, and the other is a feathery faceted dendrite when undercoolings exceed 400 K. The formation of these morphologies is discussed, taking into account the contributions of constitutional and kinetic undercoolings at different bulk undercoolings.     

Reduction of laser chirp in 1.5 ?m DFB lasers by modulation pulse shaping

The dynamic linewidth of 1.5 ?m ridge waveguide DFB lasers is shown to be reduced by shaping the pulse of the laser modulating waveform. Pulse shaping is performed by a second-order network designed to cancel the small-signal laser resonance. Results demonstrate a dynamic linewidth reduction from 1.4 ? to 0.55 ? FWHM for a 500 ps pulse.     

High-Frequency Variations in the Rotation of the Earth

We report here observational results demonstrating that a three-station network of properly distributed VLBI observatories can routinely determine UT1 with a formal standard error of ±0.05 ms of time, in an observing period of 24 h. We also report the results of a three-month series of daily observing sessions of only 1-h duration with a single interferometer, which produced estimates of UT1 with standard errors of ±0.1 ms. The UT1 values obtained from the 1-h observing sessions track smoothly between the points of the 24-h time series, and the combined time series shows that it is not unusual for UT1 to vary by 1-2 ms in periods of several days. Preliminary results of reprocessing the 24-h observing sessions in 2-h segments suggest that variations of 0.4 ms may occur on time scales of only 6-8 h.     

Whitening of sidelobe powers by pattern switching in radar array antenna

Presented here is a concept for nearly eliminating bias errors in reflectivity and velocity estimates due to power received through antenna sidelobes of pulse Doppler radars. The antenna pattern is switched from pulse to paise among specially designed patterns, with near identical main lobes, but with sidelobes having randomly distributed phases and amplitudes. The sidelobe signal then becomes incoherent without affecting the coherency of the main lobe signal. The whitened sidelobe signal does not bias the mean velocity estimate computed by Doppler processing, and an unbiased estimate of reflectivity can be computed with the knowledge of the mean whitened power level. Pattern design criteria and a method for the design of optimum patterns are developed for a linear array. The extent of sidelobe reduction by way of whitening has been studied in detail for special case of only two patterns switched randomly using a pseudonoise sequence. Pattern switching realizes an effectively low sidelobe pattern without sacrifice of main lobe resolution. A possible extension to two-dimensional arrays is suggested.     

Pulse-stream VLSI neural networks mixing analog and digitaltechniques

The pulse-stream technique, which represents neural states as sequences of pulses, is reviewed. Several general issues are raised, and generic methods appraised, for pulsed encoding, arithmetic, and intercommunication schemes. Two contrasting synapse designs are presented and compared. The first is based on a fully analog computational form in which the only digital component is the signaling mechanism itself-asynchronous, pulse-rate encoded digital voltage pulses. In this circuit, multiplication occurs in the voltage/current domain. The second design uses more conventional digital memory for weight storage, with synapse circuits based on pulse stretching. Integrated circuits implementing up to 15000 analog, fully programmable synaptic connections are described. A demonstrator project is described in which a small robot localization network is implemented using asynchronous, analog, pulse-stream devices.     

A distribution function for double-bit upsets

It is suggested that the chord length distribution method could be useful for predicting double-bit upset rates in certain circumstances. A chord length distribution function for simultaneous path lengths in two parallelepipeds, applicable to a unidirectional flux, is derived. A proof of the system is outlined for the case under consideration