An evaluation of the quantum efficiency of optical heterodyne detectors

Measurements are presented which verify the previous theoretical analysis of photomixers. A review of the theory is presented and theoretical predictions of the performance of a device are made. The measurements on the device are discussed and compared to the theory.     

A dynamic linear programming approach to market allocation of renewable resources in the italian energy system: The case of solar thermal and biogas technologies

In Italy solar thermal energy and energy from biogas are two possible means of reducing dependence on energy imports. Using a multiperiod LP model (MARKAL) the authors assessed the likely potential of both technologies under various circumstances. The study covered the period 1980–2005, in five segments of five years. It focused only on the subsystem of the energy end-uses which can be substituted for by solar thermal and biogas technologies. The overall non-renewable sources which can be saved in 20 years by these technologies total 450 PJ (1 PJ = 10^{1 5} J) if the fuel prices rise at 0 per cent average annual, 1450 PJ if the fuel prices rise at 4.2 per cent average annual, 1860 PJ if the fuel prices rise at 7.2 per cent average annual and 3780 PJ if the fuel prices rise at 15 per cent average annual. However the most competitive technologies appear to be solar water heaters used mainly in the private and commercial sectors and biogas systems used mainly in the agricultural sector. The study was carried out by APRE under ENEA (formerly CNEN) contract and was intended to serve as an analytical basis for establishing an overall development and demonstration strategy for end-use renewable technologies in Italy.     

Organochlorine Contaminants of Wintering Ducks Foraging on Detroit River Sediments

Organochlorine analysis was performed on carcasses of 13 diving ducks from a 1981 wintering population that foraged on contaminated sediments in the lower Detroit River. Mean total PCB concentrations were 10 mg/kg for seven lesser scaups (Aythya affinis), 11 mg/kg for three greater scaups (A. marila), and 7.6 mg/kg for three goldeneyes (Bucephala clangula). Highest mean levels of other residues were measured for hexachlorobenzene (1.7 mg/kg) in goldeneyes, and transnonachlor (0.33 mg/kg) and 4,4’-DDE (1.3 mg/kg) in greater scaup. Quantitative analysis of 72 PCB congeners also was applied to water, seston, sediment, benthie oligochaetes, and carp from the same site. Principal congeners in most of the samples included some of the more toxic and persistent PCBs. Results of a multivariate analysis indicated that ratios of more conservative to less conservative PCBs did not vary significantly among ducks (α = .05), but differed from those in carp, oligochaetes, and sediment. For the February through March period of fat mobilization, concentrations of total PCB in lipid were inversely correlated with percent lipid (r = 0.76) in ducks. The percentage of conservative PCBs increased slightly. The distribution and partitioning of organochlorines, including toxic PCB congeners, varied considerably within this water column-sediment-fauna ecosystem. Estimates of toxic exposure based on total PCB values may be unreliable.     

The application of multivariat mathematical-statistical methods to the solution of problems in nutrition theory,nutritional economics and food technology Part 4. Optimization with n ≥ 2 effect variables

The milling industry faces the task of saving energy without impairing the quantity and quality of the products. By applying experimental plans for the optimization of several effect variables, approximations (compromise solutions) between the cause variables (conditioning parameters) and the effect variables (quantity and quality parameters) are sought, which satisfy the aims laid down.     

Computing time-eigenvalues using the even-parity transport form

An adaption is presented to an earlier method for the prediction of time-eigenvalues of the neutron transport equation. Instead of using the full-parity first-order equation, the algorithm uses the even-parity formalism in the most expensive part of the computations resulting in a more economic method.     

The development of a stress analysis code for nuclear graphite components in gas-cooled reactors

Most of the UK nuclear power reactors are gas-cooled and graphite moderated. As well as acting as a moderator the graphite also acts as a structural component providing channels for the coolant gas and control rods. For this reason the structural integrity assessments of nuclear graphite components is an essential element of reactor design. In order to perform graphite component stress analysis, the definition of the constitutive equation relating stress and strain for irradiated graphite is required. Apart from the usual elastic and thermal strains, irradiated graphite components are subject to additional strains due to fast neutron irradiation and radiolytic oxidation. In this paper a material model for nuclear graphite is presented along with an example of a stress analysis of a nuclear graphite moderator brick subject to both fast neutron irradiation and radiolytic oxidation.     

Probability of error for selection diversity as a function of dwelltime

An expression is derived for the probability of error of an N th-order selection diversity system for the case where the receiver is forced to swell on one channel for several symbols before being allowed to make a decision regarding the best channel. It is found that the time-varying nature of a fading channel causes significant degradation of the probability of error when the dwell time becomes longer than about 10% of the inverse of the fading bandwidth of the channel. The onset of degradation is a function of the signal-to-noise ratio and of the order of diversity. Specific probabilities of error are calculated for differential phase-shift keyed modulation (DPSK). However, the calculations can be done for any other modulation technique     

Phase Shifter for a 915 MHz Phased Array Hyperthermia System

This paper describes a design for an analog phase shifter operating at 915 MHz and suitable for use in a phased array microwave hyperthermia system. Here, the major operating constraint was minimization of amplitude variation over a 1800 phase shift, whereas previous phase shifters were designed to obtain a linear relationship between phase and control voltage. The result is a simple, inexpensive hybrid coupler phase shifter that operates over a narrow bandwidth and provides 180°of continuous phase shift with input powers up to 1 W.     

Components of genetic variance and covariance for linear type traits in Jersey cattle

First available appraisals for 67,644 Jersey cows were used to estimate relative magnitudes of additive and selected sources of nonadditive genetic variance and covariance for 13 type traits scored linearly from 50 to 99 points. Covariances among four types of relatives were used to estimate components of genetic variance and covariance for each of the 13 traits. Direct additive, direct dominance, and additive maternal genetic variances and the direct-maternal additive genetic covariance were estimated using covariances among paternal half-sibs, full-sibs, daughters and dams, and maternal half-sibs. Estimates of additive genetic variance were 11 to 36% of variance within herd-appraiser subclasses with largest values for stature, strength, rump angle, rump width, and udder depth. Dominance components were two to four times the magnitude of additive components for dairy character, rump width, fore udder, rear udder height, rear udder width, and suspensory ligament but much smaller for other traits. Maternal effects and the direct-maternal additive genetic covariance appeared small for all linear type traits.