Urinalysis in clinical diagnosis

STUDY OBJECTIVE: To determine if the addition of alfentanil to propofol is more effective than propofol alone to provide adequate conditions for placement of a retrobulbar block prior to cataract surgery. DESIGN: Randomized, double-blinded study. SETTING: Outpatients at a university hospital. PATIENTS: 40 adult ASA physical status I, II, and III outpatients scheduled for elective cataract surgery. INTERVENTIONS: Patients were randomly assigned to receive one of four drug combinations prior to the placement of a retrobulbar block: Group 1, propofol alone; Group 2, alfentanil 5 micrograms/kg plus propofol; Group 3, alfentanil 10 micrograms/kg plus propofol; Group 4, alfentanil 15 micrograms/kg plus propofol. All patients were preoxygenated by face mask for two minutes prior to drug administration. The quality of conditions for block placement were determined by: (1) assessing the amount of movement by the patients while the block needle was in place, (2) cooperativeness of the patients during the operation, (3) hemodynamic side effects, (4) incidence and severity of respiratory depression, (5) incidence of nausea and vomiting, (6) recall of placement of the block, and (7) time to discharge from the hospital. Measurements and Main Results: The addition of alfentanil to propofol for sedation prior to placement of the retrobulbar block resulted in a dose-dependent reduction in movement by the patients. However, the highest dose of alfentanil (15 micrograms/kg) resulted in the greatest frequency (40% of the patients in this group) of respiratory depression (SpO2 < 90%). All patients were cooperative during the operation and responsive to verbal command within 5 minutes of placement of the block. In addition, all of the patients denied being nauseated, having vomited, or recalling block placement in the recovery room or the next day. CONCLUSIONS: The combination of alfentanil and propofol may be used to sedate patients in order to limit movement and provide a cooperative, alert patient with stable hemodynamics and limited respiratory depression during placement of retrobulbar block prior to ophthalmic surgery. However, excessive dosage of these drugs may result in hazardous respiratory depression in this patient population.     

Results of the ASTM field test of tristimulus weighting functions

In 1993, the American Society for Testing and Materials carried out a field test of newly calculated tristimulus weighting factors. These weighting factors had been calculated by a method proposed by Venable. the test also included a method of correction for bandpass dependence put forth by Stearns. the purpose of the trial was to assess the possible reduction in bandpass dependence introduced by each of these sets of weights. A large number of sets of spectral data were gathered from the cooperators in the field test. Results of integration by the various sets of tristimulus weighting factors were calculated. A total of 15 120 color differences were calculated and statistics were derived to test the probable error resulting from each method of correction. Errors attributable to bandpass dependence were on the order of a few tenths to as much as one CIELAB unit when uncorrected weight sets were used. These errors could be reduced to a few hundreths of a CIELAB unit, and in some cases to a few thousandths of a unit, by employing one correcting strategy or the other. an overall mix of strategies was ultimately chosen to minimize the bandpass dependence over the entire range of weight sets. Utilizing this mixed strategy, the median error introduced into 10-nm integration by bandpass dependence was only 0.004 CIELAB units. © 1995 John Wiley & Sons, Inc.     

Frequency transfer function of an opto-pneumatic detector

An example of an opto-pneumatic detector's (OPD) frequency transfer function is presented for the development of an opto-pneumatic interface. The theoretical model is tested through experiments in the laboratory on a real OPD prototype. In this way many of the model's parameters are studied and evaluated, such as the dimensions of the gas chamber, the thickness of the absorbent body, and the load of the OPD. The results obtained are good and show the utility of the studies described here.     

A genomic map of infectious laryngotracheitis virus and the sequence and organization of genes present in the unique short and flanking regions

The involvement of the intermediate area and B?tzinger complex (BOT) of the rostral ventral respiratory group (r-VRG) in laryngeal control and generation of the expiration reflex were studied in anaesthetized non-paralyzed cats Focal cooling (to 20 degrees C) of the nucleus paraambigualis (NPA) caused changes in the frequency and timing of breathing with the concomitant rise in laryngeal resistance. Cooling of the nucleus ambiguus resulted in a consistent drop in laryngeal resistance. Alterations in timing and intensity of breathing but no changes in laryngeal patency were found during cooling of the BOT. The expiration reflex was inhibited by cooling of either the NPA or BOT. The role of these medullary regions in the control of laryngeal patency and central integration of the expiration reflex is discussed.     

Identification of gate electrode discontinuities in submicron CMOStechnologies, and effect on circuit performance

An experiment to determine the effect of gate electrode resistivity on circuit speed gave unexpected results: circuits with the lowest sheet resistance had the poorest circuit speed. Explanation of this behaviour required development of a new high-frequency method of measuring the impedance of the gate electrode. This method revealed that the circuits with a composite gate electrode had been formed with a partial discontinuity. The measurement technique is described, and the evidence of the discontinuity is shown. The effect of the discontinuity on device and circuit speed is demonstrated     

Deformation of a rectangular plate half-embedded in an elastic base

We have investigated the deformation of a rectangular plate half-embedded in an elastic base and subjected to a mechanical load. Using the apparatus of generalized functions, the problem is reduced to a system of singular integral equations which is solved by the boundary element method. We present the results in the form of isolines of the components of the displacement vector.Translated from Problemy Prochnosti, No. 3, pp. 72–77, March, 1996.     

Improving the accuracy of autotransformer and transformer alternating-current bridges

Variable-ratio and computational methods are described for improving the accuracy of autotransformer and transformer ac bridges that take into account and eliminate the additive and multiplicative components of the systematic error due to connecting leads and jumpers of the measuring circuit. Translated from Izmeritel'naya Tekhnika, No. 6, pp. 61–63, June, 1996.     

High-pressure dc sputtering of High-Tc BPSCCO thin films withTc(0) above 100 K

High-T _c Bi(Pb)-Sr-Ca-Cu-O thin films have been made on single-crystal MgO substrates using high-pressure dc sputtering technique. X-ray studies confirm the crystallinity and highly oriented structure withc-axis perpendicular to the substrate. By optimizing the annealing schedule the formation of the high-T _c phase is stabilized. The best film exhibited superconducting transition temperature with zero-resistance temperature,T _c(0), as high as 101 K. Temperature dependence ofJ _c indicates the presence of Josephson-type weak links.