微杯电子纸及其后加工制程

SiPix利用独特的微杯(Microcup)结构和顶部灌注封装技术，通过连续整卷高速涂布的制程成功地制造出高性能的双稳性、装填电泳微粒的电子纸。SiPix可提供下列两种规格形式任意的EPD卷式成品：(A)用于有源矩阵EPD和直接驱动产品的可剥离保护膜／已灌装及密封的Microcup／无图案导体膜夹层卷；及（P）用于无源矩阵的行导体膜／已灌装及密封的Microcup／列导体膜夹层卷。已经开发出将EPD卷制成不同的显示模块或产品的简单的后续加工制程。     

软印刷技术

软印刷技术是基于弹性体印章/模具来转移图形结构的微纳加工技术。详细介绍了软印刷技术中转移图形结构的多种方式,并探讨软印刷技术在微纳电子学、光学、传感器、生物等领域的广泛应用。对软印刷技术的弹性体印章/模具制备、聚二甲基硅氧烷的属性、理论研究等进行了探讨。     

新型潜油电泵防砂防垢吸入口的研究应用

针对中原油田矿化度高、出砂量大的开采现状,设计了潜油电泵防砂防垢吸入口,作为电动潜油泵提液系统的辅助设备,对井液先通过滤网防砂管工艺装置进行砂粒过滤,同时通过高强磁防垢器进行磁化处理,使矿化物分子结构改变,结垢缓解。解决了多砂和矿物质结垢而造成的泵卡及泵结垢等技术难题,现场应用效果良好。     

MRC分集接收的MQAM在Nakagami信道上的性能分析

Nakagami信道是一种适应性较强的信道模型，MQAM(M-ary quadrature amplitude modulation)是一种频谱利用率较高的调制方式。在存在多径影响的无线通信环境中，最大比合并(maximum ratio combining)方式的分集接收是克服衰落的有效方法。本文利用适用范围更广的Nakagami信道模型，在多径衰落的情况下对最大比合并分集接收的MQAM系统误符号率性能作了分析。仿真结果对分析实际信道下具体系统的性能具有一定的参考价值。     

Inhibition effect of carbon dioxide on the oxidation of hydrogen over a platinum foil catalyst

This paper investigates the catalytic ignition of the H₂/O₂/CO₂ mixture on platinum in a stagnation flow at atmospheric pressure experimentally and numerically. We measure the ignition temperatures of the gas mixtures flowing towards resistively heated platinum with various composition ratios and various diluent gases of N₂, Ar and CO₂. Compared with N₂ or Ar, the CO₂ dilution shows higher ignition temperature by about 50 K, even at the same composition ratio. The ignition temperature increase is proportional to the dilution ratio. Through the numerical simulation, it is illustrated that higher ignition temperature is caused by the adsorption of CO₂ and following dissociation on platinum surface, which was to date considered negligible in catalytic combustion.     

An adaptive p-persistent MAC scheme for multimedia WLAN

The letter proposes an adaptive p-persistent-based (APP) medium access control (MAC) scheme for the IEEE 802.11e distributed WLAN supporting multimedia services. The APP MAC scheme adaptively gives differentiated permission probabilities to transmission stations which are in different access category and with various waiting delay. Simulation results show that the APP MAC scheme can improve the performance of multimedia WLAN, such as small voice packet dropping probability, low delay variation, and high system throughput, compared to conventional MAC algorithms     

基于AFM的微结构加工实验研究

本文建立了微动工作台和原子力显微镜相结合的微加工系统，在该系统上采用金刚石针尖进行微加工实验，与SPI系统本身的刻划软件刻划出的图形进行了比较分析，得出这个系统适合微结构的加工；并给出了采用该方法加工的1111面及多边形面微结构；还分析了金刚石针尖几何角度及SPM和工作台的相关参数对加工的影响。     

ESD protection design to overcome internal damage on interface circuits of a CMOS IC with multiple separated power pins

This paper reports a real case of electrostatic discharge (ESD) improvement on a complementary metal oxide semiconductor integrated circuit (IC) product with multiple separated power pins. After ESD stresses, the internal damage have been found to locate at the interface circuit connecting between different circuit blocks with different power supplies. Some ESD designs have been implemented to rescue this IC product to meet the required ESD specification. By adding only an extra ESD clamp N-channel metal oxide semiconductor with a channel width of 10 /spl mu/m between the interface node and the ground line, the human-body-model (HBM) ESD level of this IC product can be improved from the original 0.5 to 3 kV. By connecting the separated vertical sync signal (VSS) power lines through the ESD conduction circuit to a common VSS ESD bus realized by the seal ring, the HBM ESD level of the enhanced version IC product with 12 separated power supplies pairs can be significantly improved from original 1 kV up to > 5 kV, without the noise coupling issue.     

平行线束法的仿射研究

用 3 个仿射图的投射方向构成 1 个仿射坐标系,同时也构成 1 个三棱锥,在此仿射坐标系中用球面三角重新研究由两个仿射图求第 3 个仿射图的投影作图理论 ——平行线束法。进一步还给出了由两个仿射图得到正投影的条件、由两个正投影得到第 3 个正投影的条件、以及由 V,H 两投影得到指定方向上的正投影的条件,简化了研究过程,得到了更简单的公式。     

Using buried capacitor in LTCC-MLC balun

A novel chip-type ceramic balun designed in the 2.4 GHz ISM band frequency is presented. A buried capacitor is included in the balun, so that the length of the coupled transmission lines can be reduced and can be designed very easily. A meander or spiral broadside coupled-line is adopted to realise the proposed LTCC multi-layer balun. The measured performances of phase and amplitude balance for this LTCC-MLC balun show a good match with computer simulation