3-溴甲基-3-甲基氧杂环丁烷的合成

以2,2-二溴甲基丙醇（BBMP）为初始原料,通过与碱发生关环反应生成3-溴甲基-3-甲基氧杂环丁烷（BrMMO）。讨论了碱的种类和用量对BBMP关环产率的影响以及反应体系中碱的浓度、反应温度和反应时间对合成BrMMO产率的影响。通过实验确定的最佳工艺条件为：BBMP与NaOH摩尔比为1.0∶1.1,NaOH醇溶液的质量分数为12%,反应温度为78℃,反应时间为4h时,BrMMO产率为65%。最终产品经元素分析、IR和1HNMR检测确定为BrMMO。该试验工艺简单,原料易得,且溶剂便于回收、污染小。     

农药原药全分析

简要介绍了关于农药全分析的要求并介绍了农药全分析的过程，着重介绍了农药全分析中的三种定性分析方法，比较了它们的优缺点。     

Blends of poly(propylene) and polyacetal compatibilized by ethylene vinyl alcohol copolymers

Polymer blends of poly(propylene) (PP) and polyacetal (polyoxymethylene, POM) with ethylene vinyl alcohol (EVOH) copolymers were investigated by differential scanning calorimetry (DSC), rheological, tensile, and impact measurements, Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). The PP–POM–EVOH blends were extruded with a co‐rotating twin‐screw extruder. The ethylene group in the EVOH is partially miscible with PP, whereas the hydroxyl group in the EVOH can form hydrogen bonding with POM. The EVOH tends to reside along the interface, acting as a surfactant to reduce the interfacial tension and to increase the interfacial adhesion between the blends. Results from SEM and mechanical tests indicate that a small quantity of the EVOH copolymer or a smaller vinyl alcohol content in the EVOH copolymer results in a better compatibilized blend in terms of finer phase domains and better mechanical properties. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1471–1477, 2003     

倒谱距离和短时能量的语音端点检测方法研究

在讨论传统倒谱距离语音端点检测方法不足的基础上,提出了一种基于倒谱距离和短时能量的语音端点检测改进方法。基于倒谱距离的单参数端点检测方法在高信噪比环境下效果较好,然而在低信噪比的环境下其端点检测性能急剧下降。通过分析倒谱距离和短时能量各自的端点检测特性,建立了一种结合二者特点的双参数判决准则,在保证运算量没有显著增大的前提下提高了端点检测的准确率。仿真实验结果表明,新方法相对于基本倒谱距离端点检测方法,在低信噪比的高斯白噪声环境下端点检测性能有较明显提高。     

基于TMS320C6415的飞控计算机接口模块设计

文中以DSP TMS320C6415为核心处理器,设计并实现了飞控计算机接口模块。该模块采用JTAG接口进行DSP芯片内部测试,扩展了存储器,使用FPGA芯片对模块内的资源进行逻辑控制,可以满足飞控计算机中的模拟量处理、离散量处理以及RS422串行接口通讯。飞控计算机接口模块被应用于多个项目中,实践证明,该模块能够正确、快速地实现其接口信号处理功能。文中不仅对接口模块硬件资源选择、工作原理的关键问题进行了评述,而且对DSP的软件流程和工作方式进行了描述。     

面向移动机器人应用的跨平台自适应软件框架

摘要：自适应软件在移动机器人上具有广泛的应用前景,然而要在具有不同软硬件平台的移动机器人上开发自适应软件是一件非常困难的事情．．为了解决这个问题,提出并实现了一个面向移动机器人应用的跨平台自适应软件框架该框架屏蔽了运行平台的软硬件差异性,并使用规则文件将自适应逻辑分离出来,从而降低了自适应软件开发的难度。为了便于编写及检查规则文件,还实现了一个可视化的规则文件编辑器,用于自动生成模型图,并检查规则中存在的语法及逻辑错误i,最后,通过实验测试了框架的使用情况,并对框架的应用效果进行了评估、     

Effects of chemical additives on high-field electromechanical properties of PMN–PT–BT ceramics

A chemical additive method using sol–gel reactions was used to modify the composition and resultant properties of a commercially available 0.96(0.91Pb(Mg_1/3Nb_2/3)O₃–0.09PbTiO₃)–0.04 BaTiO₃ (PMN–PT–BT) ceramic. Without an additional ball-mixing process, several combinations of minor additives such as Fe, Ba, Sr, Zn, and Ti were incorporated by the chemical method. Weak- and high-field characteristics including dielectric properties, induced strain and polarization, and associated hystereses were evaluated for the samples sintered at 1200 °C for 4 h. All properties were found to depend on the chemical additives and temperature. Especially, the temperature dependence of high-field characteristics revealed different behavior from that reported for conventionally prepared samples. For example, the samples containing 0.5 wt.% SrO, 0.5 wt.% ZnO, and 0.5 wt.% TiO₂ did not exhibit a transition to piezoelectric behavior at the temperature expected from the dielectric measurements. Overall, the coating process has been successfully used to modify, and in some cases, enhance the high-field characteristics of PMN-based ceramics for electromechanical uses.     

强光照对雨生红球藻合成虾青素的影响

在不同的光照强度下研究了雨生红球藻细胞内虾青素的合成与初级代谢的关系.在强光(HL)和中等强度(ML)的光照条件下,雨生红球藻细胞内1,5-二磷酸核酮糖羧化酶 (Rubisco)和硝酸还原酶(NR)的活性第1天大幅度提高,2天后又迅速下降.与此同时,硝酸盐浓度也快速降低.当虾青素在第4天(HL)和第6天(ML)开始合成时, HL中Rubisco和NR活性以及NO3-浓度分别下降了75.5%,71.5% 和96.2%,而ML中则下降了76.5%,74.7% 和94.3%.相比之下,在低光照(LL)条件下,实验结束时三个指标仅下降了25.9%,29.8% 和56.8%,细胞中没有虾青素积累.结果表明强光提高了Rubisco 和 NR活性,导致硝酸盐浓度迅速降低而最终又抑制了这两种酶的活性,造成雨生红球藻光合作用效率下降即"碳饥饿".在此状态下,为了生存,细胞内合成虾青素的相关基因被激活,藻细胞开始合成并积累虾青素.     

Li NMR, ionic conductivity and self-diffusion coefficients of lithium ion and solvent of plasticized organic-inorganic hybrid electrolyte based on PPG-PEG-PPG diamine and alkoxysilanes

Organic-inorganic hybrid electrolytes based on poly(propylene glycol)-block-poly(ethylene glycol)-block-poly(propylene glycol) bis(2-aminopropyl ether) (D2000) complexed with LiClO₄ via the co-condensation of an epoxy trialkoxysilane and tetraethoxysilane have been prepared and plasticized by a solution of ethylene carbonate (EC)/propylene carbonate (PC) mixture (1:1 by weight). The cross-linked hybrid network shows no solvent exudation and retains a large amount of plasticizer over 70 wt.% in stable state. The in situ built in silica network provides the hybrid electrolytes with good mechanical properties. The ionic conductivity of the dry hybrid electrolyte films was enhanced by two orders of magnitude via plasticization, reaching a maximum conductivity value of 4.0 × 10⁻³ S/cm at 30 °C. Variable temperature ⁷Li-{¹H} magic angle spinning (MAS) NMR demonstrated that the Li⁺ cations can be complexed by the polymer network as well as by the plasticizing solvents, but not with the incorporated silica network. Furthermore, the ⁷Li chemical shift change indicated a progressive change in the lithium coordination from lithium-polymer to lithium-solvent with increasing temperatures. The role of the solvents and the mobility of the lithium ions were investigated by pulsed gradient spin echo (PGSE) NMR measurements to elucidate the behavior of the ionic conductivity.     

Synthesis and dielectric properties of polystyrene‐clay nanocomposite materials

Polystyrene‐clay nanocomposite (PsCN) materials were synthesized and their properties of crystallinity, thermal behavior, and dielectric characteristics were investigated. A polymerizable cationic surfactant, [2‐(dimethylamino)ethyl]triphenylphonium bromide, was used for the intercalation of montmorillonite (MMT). The organophilic MMT was prepared by Na⁺‐exchanged MMT and ammonium cations of a cationic surfactant in an aqueous medium. Organophilic styrene monomers were intercalated into the interlayer regions of organophilic clay hosts followed by a free‐radical polymerization. Exfoliation to 2 wt % MMT in the polystyrene (PS) matrix was achieved as revealed by X‐ray diffraction (XRD) and transmission electron microscopy (TEM). Thermal properties by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were also studied. The dielectric properties of PsCNs in the form of film with clay loading from 1.0 to 5.0 wt % were measured under frequencies of 100 Hz–1 MHz at 25–70°C. A decreased dielectric constant and low dielectric loss were observed for PsCN materials. The dielectric response at low frequency that originated from dipole orientation was suppressed due to the intercalation of clay materials. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1368–1373, 2004