A study of roll‐printing technology for TFT‐LCD fabrication

Abstract— Recently, potential breakthrough technologies for low‐cost processing of TFT‐LCDs and new process developments for flexible‐display fabrication have been widely studied. A roll‐printing process using etch‐resist material as a replacement for photolithographic patterning was investigated. The characterization of the properties of patterns formed in roll printing, a method to fabricate cliché plates for fine patterns, and the design of a new formulation for resist printing ink is reported. The pattern position accuracy, which is one of the most important issues for the successful application of printing processes in display manufacturing was studied and how it can be improved by optimizing the blanket roll structure is explained. New design rules for the layout of the thin‐film‐transistor array was derived to improve the compatibility of roll printing. As a result, a prototype 15‐in.‐XGA TFT‐LCD panel was fabricated by using printing processes to replace all the photolithographic patterning steps conventionally used.     

A rugged display: Recent results of flexible cholesteric liquid‐crystal displays

Abstract— A 3‐m‐long rugged flexible display having a novel single‐plastic‐substrate structure has been demonstrated with a coated cholesteric liquid‐crystal mixture. The display is designed to be fabricated by a roll‐to‐roll process to increase productivity at a competitive cost. It has the advantage of having almost no limitation in display length. The high‐resolution (300‐dpi) monochrome cholesteric liquid‐crystal display (ChLCD) can be achieved by using a photo‐addressing method. A single‐layered 10.4‐in. color ChLCD also has been developed with good color and contrast.     

Ambient‐light sensor system with wide dynamic range enhanced by adaptive sensitivity control

Abstract— A new digital ambient‐light sensor system is presented which employs two linear light sensors with different sensitivities and automatically adjusts the sensitivity based on the illumination condition. The adaptation mechanism allows a very wide range of light intensity to be detected, and the input dynamic range of the system is substantially improved from 22.5 to 45.1 dB. The proposed method does not require any additional precision bits for output data. Due to the small number of the output bits and the simple conversion process, the system can be easily integrated on the display panel.     

12.1‐in. WXGA AMOLED display driven by InGaZnO thin‐film transistors

Abstract— A full‐color 12.1‐in.WXGA active‐matrix organic‐light‐emitting‐diode (AMOLED) display was, for the first time, demonstrated using indium‐gallium‐zinc oxide (IGZO) thin‐film transistors (TFTs) as an active‐matrix backplane. It was found that the fabricated AMOLED display did not suffer from the well‐known pixel non‐uniformity in luminance, even though the simple structure consisting of two transistors and one capacitor was adopted as the unit pixel circuit, which was attributed to the amorphous nature of IGZO semiconductors. The n‐channel a‐IGZO TFTs exhibited a field‐effect mobility of 17 cm²/V‐sec, threshold voltage of 1.1 V, on/off ratio >10⁹, and subthreshold gate swing of 0.28 V/dec. The AMOLED display with a‐IGZO TFT array is promising for large‐sized applications such as notebook PCs and HDTVs because the a‐IGZO semiconductor can be deposited on large glass substrates (larger than Gen 7) using the conventional sputtering system.     

Digital‐to‐analog converter with gamma correction on glass substrate for TFT‐panel applications

Abstract— Low‐temperature polysilicon (LTPS) technology has a tendency towards integrating all circuits on glass substrate. However, the poly‐Si TFTs suffered poor uniformity with large variations in the device characteristics due to a narrow laser process window for producing large‐grained poly‐Si TFTs. The device variation is a serious problem for circuit realization on the LCD panel, so how to design reliable on‐panel circuits is a challenge for system‐on‐panel (SOP) applications. In this work, a 6‐bit R‐string digital‐to‐analog converter (DAC) with gamma correction on glass substrate for TFT‐panel applications is proposed. The proposed circuit, which is composed of a folded R‐string circuit, a segmented digital decoder, and reordering of the decoding circuit, has been designed and fabricated in a 3‐μm LTPS technology. The area of the new proposed DAC circuit is effectively reduced to about one‐sixth compared to that of the conventional circuit for the same LTPS process.     

Dual‐plate OLED display (DOD) based on amorphous‐silicon (a‐Si) TFT backplane

Abstract— An improved AMOLED with an a‐Si TFT backplane based on a unique structure is reported. The new structure is refered to as a dual‐plate OLED display (DOD). While a top‐emission OLED array is directly fabricated on a TFT backplane, the DOD consists of an upper OLED substrate and a lower TFT substrate, which are independently fabricated. Because the OLED substrate, which is fabricated through the process flow of bottom emission, is attached to the TFT substrate, the light is emitted in the opposite direction to the TFT backplane. The DOD enables the design of large‐sized TFTs and a complicated pixel circuit. It can also not only achieve higher uniformity in luminance in large‐sized displays due to the low electrical resistance of the common electrode, but also wider viewing angles.     

Synthesis of symmetric and asymmetric singly terminated elliptic ladder filters for multiplexing applications

An extension of the Cauer ladder development for synthesizing singly terminated filters with symmetric and asymmetric responses is presented. Basically, a driving‐point immittance including reactive constant elements is carried out in such a way that provides the transmission zeros. The reactive constant elements are introduced into the synthesis for two reasons. The first is to consider the possibility of the asymmetric position of transmission zeros in the real frequency axis. The second one is to obtain canonical forms, i.e. networks with the minimum number of elements in the case of symmetrical responses. To validate the proposed method, a filter with asymmetrical response has been synthesized, comparing different topologies for its use in multiplexers. This fact is illustrated with a Ku‐band elliptic response diplexer designed in H‐plane rectangular waveguide. © 2009 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2009.     

Comfort evaluation and bed adjustment according to sleeping positions

This study explodes the relationships between the height adjustment of bed sectors and subjective comfort depending on three types of sleeping positions. An adjustable bed system that regulates the heights of 8 adjustment sectors of the bed was developed. To evaluate the comfort of 9 body areas, subjective ratings were requested from 64 subjects ranging in age from 25 to 50. The subjects included 29 males and 35 females. For an objective evaluation, the patterns of pressure distribution were investigated according to the three sleeping positions. During two separate states (before bed adjustment and after bed adjustment), measurements of the adjusted bed height and pressure distribution, and subjective ratings according to three sleeping positions were performed. Based on the results of the adjusted heights of the 8 sectors in the bed, the subjects preferred the W‐shaped sleeping posture in both the supine and side positions. However, the U‐shaped sleeping posture was preferred in the prone position. With respect to these sleeping positions, the heights of sectors significantly correlated with the subjective ratings presented by the subjects, as well as the ratios of pressure. © 2009 Wiley Periodicals, Inc.     

Design and Implementation of a Ubiquitous Robotic Space

This paper describes a concerted effort to design and implement a robotic service framework. The proposed framework is comprised of three conceptual spaces: physical, semantic, and virtual spaces, collectively referred to as a ubiquitous robotic space. We implemented a prototype robotic security application in an office environment, which confirmed that the proposed framework is an efficient tool for developing a robotic service employing IT infrastructure, particularly for integrating heterogeneous technologies and robotic platforms.     

Global sliding‐mode control with generalized sliding dynamics

A global sliding‐mode control (GSMC) scheme is proposed to provide a framework for ensuring the existence of a sliding mode throughout an entire response. Based on this framework, robust eigenvalue‐assignment GSMC (REA‐GSMC) is proposed to robustly assign closed‐loop eigenvalues that must be real. The eigenvalues being all real, however, leads to sluggish responses. According to most error criteria such as IAE, ISE, and ITAE, the optimum system should have complex eigenvalues. This paper proposes a GSMC scheme with generalized sliding dynamics, referred to as Generalized GSMC, in order to release the previous constraint on the REA‐GSMC. Thus, the Generalized GSMC can be designed to achieve a system that is both robust and optimum in the sense that it minimizes certain error performance indices in spite of the presence of system uncertainties. Experiments were conducted on a two‐link direct‐drive manipulator to demonstrate the effectiveness of the proposed scheme. Copyright © 2009 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society