Reduction of return current noise by energy‐compensating active control

A newly proposed energy‐compensating active control is implemented to reduce the return current noise which is caused by inverter‐driven electric car systems. The energy‐compensating active control detects the energy charged at the filter capacitor, and reduces the energy and current of the noise frequency component by simple feedback loop incorporated with the conventional motor torque controller. No additional sensors or circuit arrangements are necessary; therefore, the return current can be attenuated effectively without any further cost. The return current with an inverter system is measured using a current probe and an FFT analyzer, and it is shown that the 25‐Hz noise current is reduced by up to 10 dB with the control. The results reveal that the low‐frequency return current noise can be attenuated with the simple control scheme, which would expectedly reduce the size of filter reactors and capacitors to meet the current limit level of the signaling system's track relays. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 165(4): 84–91, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20615     

An experimental evaluation of spatial distribution for deeply penetrating protons in carbon material

The peak profile of the 4.8-MeV resonance by the ¹²C(p,p)¹²C reaction in backscattering geometry has been analyzed to examine two kinds of stragglings of proton, i.e. the depth straggling in the incoming path and the energy loss straggling in the outgoing path. The analysis, which is combined with existing theoretical treatments for the stopping process and the energy loss straggling, has made it possible to deduce the penetration depth and its spread at the resonance position in carbon materials. The present method, as a new tool for direct inspection of ion beams inside target material, is explained in detail.     

Gas entrainment rate and flow pattern of vertical plunging liquid jets

For a vertical plunging liquid jet system using various liquids, the effects of the operating conditions including the nozzle length-to-diameter ratio on the gas entrainment rate Q_g were evaluated experimentally. The differences in Q_g were related to the changes in the jet shape before plunging and the velocity of the plunging liquid jet at the point where the gas sheath breaks up. Empirical relationships were also presented to predict the maximum depth Z of bubbles entrained by the diffusing jet. The changes of Z were further discussed in terms of the downward liquid velocity distribution in the submerged two-phase region, which depends mainly on the size of entrained bubbles.     

Evaluation of Stress and Crystal Quality in Si During Shallow Trench Isolation by UV-Raman Spectroscopy

Defects and stress gradually accumulate throughout various Si large-scale integration fabrication processes. It is essential to monitor defects and stress carefully to suppress their unintentional introduction. In this study, we measured the stress and crystal quality in shallow trench isolation (STI) samples by ultraviolet (UV)-Raman spectroscopy with an extremely high-resolution wavenumber to evaluate the effect of post-annealing on the recovery of Si crystals. The variations of crystal quality in 200-mm wafers with STI structures gradually decreased after post-annealing for 4 h, 6 h, and 8 h; however, there was no substantial difference in the values of full-width at half-maximum of the Raman spectra. Precise measurements of variations of stress and crystal quality were successfully performed by UV-Raman spectroscopy with a high-resolution wavenumber, which enabled us to evaluate the STI process accurately.     

3He Melting Pressure Measurements in High Magnetic Fields

Experimental methods and preliminary results of high-precision measurements of the ³ He melting curve in high magnetic fields have been described. The purpose of this work is twofold. One is to establish a reliable millikelvin temperature scale in high fields (T 10 mK, B 15 T), The other is to investigate a high field region of the magnetic phase diagram of solid ³ He by measuring the melting pressure down to temperatures below 1 mK. Besides the two superfluid transitions, the phase transition temperatures between the spin ordered solid and the paramagnetic solid, T _HFP , were determined at B = 12 and 10 T with good accuracy, which is an extension of previous measurements up to 8 T. The present T _HFP (B) line can not be scaled to that at a higher density with a single Grüneisen parameter, indicating a variation of density dependencies of the multiple-spin exchange interactions.     

Fracture and deformation properties of Ni-Fe superalloy in cryogenic high magnetic field environments

The present paper includes experimental and analytical data on the fracture properties of a nickel-iron superalloy, a ferromagnetic austenite, at 4 K in magnetic fields of 0 and 6 T. The tensile, notch tensile and small punch tests are employed. A finite element analysis is also performed to convert the experimentally measured load-displacement data into useful engineering information. To interpret the results we review the available theory of the influence of magnetic field on the stress intensity factor for a crack in ferromagnetic materials.     

Determining surface orientations of transparent objects based on polarization degrees in visible and infrared wavelengths

Techniques for modeling an object through observation are very important in object recognition and virtual reality. A wide variety of techniques have been developed for modeling objects with opaque surfaces, whereas less attention has been paid to objects with transparent surfaces. A transparent surface has only surface reflection; it has little body reflection. We present a new method for obtaining surface orientations of transparent surfaces through analysis of the degree of polarization in surface reflection and emission in visible and far-infrared wavelengths, respectively. This parameter, the polarization degree of reflected light at the visible wavelengths, is used for determining the surface orientation at a surface point. The polarization degree at visible wavelengths provides two possible solutions, and the proposed method uses the polarization degree at far-infrared wavelengths to resolve this ambiguity.     

Development of an energy-binned photon-counting detector for X-ray and gamma-ray imaging

The aim of this study is to develop an energy-binned photon-counting (EBPC) detector that enables us to provide energy information of x-rays with a reasonable count statistics. We used Al-pixel/CdTe/Pt semiconductor detectors, which had an active area of 8 mm×144 mm and consisted of 18 modules aligned linearly. The size of a CdTe detector module was 8 mm×8 mm and the thickness of the CdTe crystal was 1 mm. Each module consisted of 40×40 pixels and the pixel size was 200 μm×200 μm. We applied the bias voltage of −500 V to the Pt common electrode. The detector counted the number of x-ray photons with four different energy windows, and output four energy-binned images with pixel depths of 12, 12, 11 and 10 bits at a frame rate of 1200 Hz (300 Hz×4 energy bins). The basic performance of the detector was evaluated in several experiments. The results showed that the detector realized the photon counting rate of 0.4×10⁶ counts/sec/pixel (10⁷ counts/sec/mm²), energy resolution 4.4% FWHM at 122 keV. The integral uniformity of the detector was about 1% and the differential uniformity was about 1%. In addition, the image quality was examined with a resolution chart and step-wedge phantoms made of aluminum and polymethyl methacrylate. And we compared the quality of an acquired image with that acquired with an energy integration detector. The results of these experiments showed that the developed detector had desirable intrinsic characteristics for x-ray photon counting imaging.