Microplane Model M5 with Kinematic and Static Constraints for Concrete Fracture and Anelasticity. I: Theory

Presented is a new microplane model for concrete, labeled M5, which improves the representation of tensile cohesive fracture by eliminating spurious excessive lateral strains and stress locking for far postpeak tensile strains. To achieve improvement, a kinematically constrained microplane system simulating hardening nonlinear behavior (nearly identical to previous Model M4 stripped of tensile softening) is coupled in series with a statically constrained microplane system simulating solely the cohesive tensile fracture. This coupling is made possible by developing a new iterative algorithm and by proving the conditions of its convergence. The special aspect of this algorithm (contrasting with the classical return mapping algorithm for hardening plasticity) is that the cohesive softening stiffness matrix (which is not positive definite) is used as the predictor and the hardening stiffness matrix as the corrector. The softening cohesive stiffness for fracturing is related to the fracture energy of concrete and the effective crack spacing. The postpeak softening slopes on the microplanes can be adjusted according to the element size in the sense of the crack band model. Finally, an incremental thermodynamic potential for the coupling of statically and kinematically constrained microplane systems is formulated. The data fitting and experimental calibration for tensile strain softening are relegated to a subsequent paper in this issue, while all the nonlinear triaxial response in compression remains the same as for Model M4.     

Lithium Intercalation Compound Dramatically Influences the Electrochemical Properties of Exfoliated MoS2

MoS₂ and other transition metal dichalcogenides (TMDs) have recently gained a renewed interest due to the interesting electronic, catalytic, and mechanical properties which they possess when down‐sized to single or few layer sheets. Exfoliation of the bulk multilayer structure can be achieved by a preliminary chemical Li intercalation followed by the exfoliation due to the reaction of Li with water. Organolithium compounds are generally adopted for the Li intercalation with n‐butyllithium (n‐Bu‐Li) being the most common. Here, the use of three different organolithium compounds are investigated and compared, i.e., methyllithium (Me‐Li), n‐butyllithium (n‐Bu‐Li) and tert‐butyllithium (t‐Bu‐Li), used for the exfoliation of bulk MoS₂. Scanning transmission electron microscopy (STEM), Raman spectroscopy, X‐ray photoelectron spectroscopy (XPS), and cyclic voltammetry (CV) are adopted for a comprehensive characterization of all materials under investigation. In addition, catalytic properties towards the hydrogen evolution reaction (HER) and capacitive properties are also tested. Different organolithium compounds exhibit different extent of Li intercalation resulting in different degrees of exfoliation. The inherent electrochemical behavior of MoS₂ consisting of significant anodic and cathodic peaks as well as its capacitive behavior and catalytic properties towards hydrogen evolution reaction are strongly connected to the exfoliation compound used. This research significantly contributes to the development of large‐scale synthesis of electrocatalytic MoS₂‐based materials.     

Schrifttumsberichte

Ohne Zusammenfassung     

Hybrid charge control for stick-slip piezoelectric actuators

The article describes an analog electronic circuit for driving stick-slip piezoelectric linear actuators. The task for the amplifier is to provide a high-voltage asymmetric sawtooth-like signal and feed it into a capacitive load. Generation of excessive heat must be avoided while maximizing the slew rate. In order to guarantee a steady translation, the hysteretic behaviour of the piezoelectric material must be compensated. Combination of a charge control scheme with switching is proposed as an efficient solution. Laboratory experiments confirm the superiority of this tailored solution over other existing techniques based on versatile linear voltage amplifiers.     

Dynamic extension - A new principle for a vacuum primary standard for UHV-range (10-10 Pa) calibration of hot cathode ionisation gauges

The main obstacle in the construction of primary vacuum standards for very low pressures - ultra-high vacuum (UHV) - is outgassing from the walls of the apparatus. Thus, principles utilising a higher pumping rate in the calibration chamber, e.g., the pressure ratio technique, seem to be more useful for this range. However, a serious problem is inherent in this method, namely, that the gas in the calibration chamber is not in equilibrium and thus cannot be characterised by a single scalar pressure value, although such a value is then used to evaluate the measurement. This discrepancy can be overcome by using a hot cathode ionisation gauge as a transfer standard calibrated by the dynamic extension method.The dynamic extension method is explained and compared with the pressure ratio technique. The basic conditions for achieving acceptable uncertainty values are considered.     

Effect of Glucocorticosteroids in Diamond-Blackfan Anaemia: Maybe Not as Elusive as It Seems

Diamond-Blackfan anaemia (DBA) is a red blood cell aplasia that in the majority of cases is associated with ribosomal protein (RP) aberrations. However, the mechanism by which this disorder leads to such a specific phenotype remains unclear. Even more elusive is the reason why non-specific agents such as glucocorticosteroids (GCs), also known as glucocorticoids, are an effective therapy for DBA. In this review, we (1) explore why GCs are successful in DBA treatment, (2) discuss the effect of GCs on erythropoiesis, and (3) summarise the GC impact on crucial pathways deregulated in DBA. Furthermore, we show that GCs do not regulate DBA erythropoiesis via a single mechanism but more likely via several interdependent pathways.     

Intrinsic carrier multiplication in layered Bi2O2Se avalanche photodiodes with gain bandwidth product exceeding 1 GHz

Emerging layered semiconductors present multiple advantages for optoelectronic technologies including high carrier mobilities, strong light-matter interactions, and tunable optical absorption and emission. Here, metal-semiconductor-metal avalanche photodiodes (APDs) are fabricated from Bi₂O₂Se crystals, which consist of electrostatically bound [Bi₂O₂]²⁺ and [Se]²⁻ layers. The resulting APDs possess an intrinsic carrier multiplication factor up to 400 at 7 K with a responsivity gain exceeding 3,000 A/W and bandwidth of ~ 400 kHz at a visible wavelength of 515.6 nm, ultimately resulting in a gain bandwidth product exceeding 1 GHz. Due to exceptionally low dark currents, Bi₂O₂Se APDs also yield high detectivities up to 4.6 × 10¹⁴ Jones. A systematic analysis of the photocurrent temperature and bias dependence reveals that the carrier multiplication process in Bi₂O₂Se APDs is consistent with a reverse biased Schottky diode model with a barrier height of ~ 44 meV, in contrast to the charge trapping extrinsic gain mechanism that dominates most layered semiconductor phototransistors. In this manner, layered Bi₂O₂Se APDs provide a unique platform that can be exploited in a diverse range of high-performance photodetector applications.

     

Limitations of shallow networks representing finite mappings

Neural Computing and Applications - Limitations of capabilities of shallow networks to efficiently compute real-valued functions on finite domains are investigated. Efficiency is studied in terms...     

Confinement-Shear Lattice Model for Concrete Damage in Tension and Compression: II. Computation and Validation

The concrete material model developed in the preceding Part I of this study is formulated numerically. The new model is then verified by comparisons with experimental data for compressive and tensile uniaxial tests, biaxial tests, and triaxial tests, as well as notched tests of mode I fracture and size effect.