Differential scanning calorimetric examination of melamine–formaldehyde microcapsules containing decane

The main objective of this study was to investigate the composition of microcapsules and the degree of curing of melamine–formaldehyde (MF) resin, which formed a shell of microcapsules, by the use of differential dynamic calorimetry (DSC). For this purpose, decane was chosen as core material. The microencapsulation of decane with MF resin was carried out at different temperatures and pH values. The temperature and pH value were kept constant during the process. The composition of the microcapsules and the degree of curing of the shell material were studied during and after the microencapsulation process. DSC analysis, in combination with scanning electron microscopy analysis, was revealed as an effective tool for the investigation of the microencapsulation process with MF resin. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Growth of Transparent and Conductive Polycrystalline (0001)‐ZnO Films on Glass Substrates Under Low‐Temperature Hydrothermal Conditions

Flat panel display technology seems to be an ever‐expanding field developing into a multibillion dollar market. A set of technical solutions involve a transparent conducting film (TCF) that is today still dominated by indium‐tin‐oxide (ITO). In a race to find alternatives that would avoid the indium pitfalls, mainly due to its increasing price and limited natural availablity, replacement materials have been extensively investigated. This work demonstrates that by exploiting basic principles of crystal growth in geometrically constrained conditions, zinc oxide (ZnO) could easily be utilized for this purpose. ZnO layers were grown on inexpensive glass substrates via low‐temperature citrate‐assisted hydrothermal (HT) method. It was shown that in the nucleation stage the crystal growth can be efficiently controlled by spatially confined oriented growth (SCOG) mechanism to produce smooth and dense (0001) oriented polycrystalline ZnO films with superb optical properties. Our products show optical transparency of 82% and surprisingly low sheet resistance for undoped ZnO, only in the order of few 100 Ω sq^?1. We believe that a very high degree of self‐organization between the ZnO crystals in our polycrystalline films grown under controlled SCOG conditions is main reason for the highest so far reported transparency to conductivity ratio for undoped ZnO thin film ceramics.     

Physicochemical Characterization and Drug Release Properties of Methyl-Substituted Silica Xerogels Made Using Sol–Gel Process

In this work, a multi-analytical approach involving nitrogen porosimetry, small angle neutron and X-ray scattering, Fourier transform infrared (FTIR) and nuclear magnetic resonance (NMR) spectroscopies, X-ray diffraction, thermal analysis and electron microscopy was applied to organically modified silica-based xerogels obtained through the sol–gel process. Starting from a tetraethoxysilane (TEOS) precursor, methyltriethoxysilane (MTES) was added to the reaction mixture at two different pH values (2.0 and 4.5) producing hybrid xerogels with different TEOS/MTES molar ratios. Significant differences in the structure were revealed in terms of the chemical composition of the silica network, hydrophilic/hydrophobic profile, particle dimension, pore shape/size and surface characteristics. The combined use of structural characterization methods allowed us to reveal a relation between the cavity dimensions, the synthesis pH value and the grade of methyl substitution. The effect of the structural properties on the controlled Captopril release efficiency has also been tested. This knowledge facilitates tailoring the pore network for specific usage in biological/medical applications. Knowledge on structural aspects, as reported in this work, represents a key starting point for the production of high-performance silica-based hybrid materials showing enhanced efficacy compared to bare silica prepared using only TEOS.     

Poly(methyl methacrylate)/montmorillonite nanocomposites prepared by bulk polymerization and melt compounding

This article focuses on structural, thermal, and mechanical properties of nanocomposites in dependence of preparation method and poly(methyl mathacrylate) (PMMA)/organically modified montmorillonite (OMMT) ratio. PMMA/OMMT nanocomposites were prepared by bulk polymerization and by melt compounding. Properties of nanocomposites of the same composition prepared by the two methods were compared. It was observed that nanocomposites prepared via melt compounding at 200°C had a highly oriented structure with lower interlayer spacing values than nanocomposites prepared via bulk polymerization. Two reasons for the observed smaller interlayer spacing obtained by melt compounding were identified. The first is enhanced PMMA penetration and/or formation between layers in the case of bulk polymerization, which was confirmed by determination of stronger interactions between OMMT and PMMA by Soxhlet extraction, infrared spectroscopy, and differential dynamic calorimery. The second reason for smaller interlayer spacing for nanocomposites prepared by melt compounding is organic modifier degradation during melt compounding process, which was confirmed by thermogravimetric analysis. Both reasons lead to the fracture of melt compounded nanocomposites on the OMMT‐polymer interface, which was observed by scanning electron microscopy. For nanocomposites with disoriented structure and larger interlayer spacing prepared via bulk polymerization the fracture occurred in the polymer matrix. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers     

EDIpro — an integrated environment for electronic data interchange

We have developed a pull-down, menu-based integrated environment for electronic data interchange according to the UN/EDIFACT standard. The software package runs under the MS-DOS operating system and supports all phases of an interchange, from designing an interchange agreement to the final transmission of generated EDIFACT messages. This case study describes the solutions that introduce the open-EDI system properties.     

Thermal stresses in aluminium alloy die casting dies

The aim of this research is to analyze the influence of Aluminium Alloy die casting parameters, die material, and die geometry on in-service tool life. An innovative immersion testing apparatus is developed, at which Aluminium Alloy die casting is simulated. It enables controlled thermal fatigue cycling. Special specimens with different edge geometry and specimens with maraging steel welds deposited by Gas Tungsten Arc (GTA) welding are prepared. They are subjected to cyclic heating in bath of molten Aluminium Alloy 226 and cooling in bath of water-based lubricant. The specimens are continuously internally cooled with cold water. The microstructure, hardness profile, and the surface cracks developed are periodically analyzed after completion of a particular number of cycles. Temperature transients at different locations of the specimens are measured and used in calibration of finite element model (FEM). The computation of transient stresses is performed by developed FEM. The influence of immersion test parameters, material, specimen edge geometry, and thickness of maraging steel surfacing welds on thermal stresses is studied. To improve thermal fatigue testing efficiency, a specimen of particular geometry and immersion test parameters are developed based on finite element analysis. The results showed significant differences in produced thermal stresses for analyzed materials, test parameters, and edge geometries. Maraging steel is found to be superior material for die casting dies, due to generation of lower stresses.     

Qualitative trust modeling in SOA

Trust among cooperating agents is an essential precondition for every e-business transaction. It is becoming increasingly vital in service oriented architectures (SOAs), where services from various administration domains are deployed. Traditional hard security mechanisms with different techniques of authorization, access control and information security services give a solid foundation, but they fail when cooperating entities act deceitfully. Trust as a soft social security mechanism can protect against such threats and consequently improves the quality of services and reliability of service providers. This paper presents an abstract trust model that applies complementary qualitative methodology which addresses the core of trust as socio-cognitive phenomenon. The model complements existing quantitative methodologies and is applied in the web services environment that enables trust management in SOAs.