Effect of vibration on eye,head and helmet movements while wearing a helmet‐mounted display

Previous research has demonstrated a loss of helmet‐mounted display (HMD) legibility for users exposed to whole body vibration. A pair of human factors studies was conducted to evaluate the effect of whole body vibration on eye, head, and helmet movements for seated users of a HMD while conducting simple fixation and smooth pursuit tracking tasks. These experiments confirmed that vertical eye motion can be demonstrated, that is consistent with the human visual systems' response to the vestibular–ocular reflex (VOR). Helmet slippage was also shown to occur, which could exacerbate loss of display legibility. The largest amplitudes in eye movements were observed during exposure to sinusoidal vibration in the 4–6 Hz range, which is consistent with the frequencies that past research has associated with whole‐body resonance and the largest decrease in display legibility. Further, the measured eye movements appeared to be correlated with both the angular acceleration of the user's head and the angular slippage of the user's helmet. This research demonstrates that the loss of legibility while wearing HMDs likely results from a combination of VOR‐triggered eye movements and movement of the display. Future compensation algorithms should consider adjusting the display in response to both VOR‐triggered eye and HMD motion.     

Mullite for Structural, Electronic, and Optical Applications

Mullite (3Al₂O₃·2SiO₂) is becoming increasingly important in electronic, optical, and high-temperature structural applications. This paper reviews the current state of mullite-related research at a fundamental level, within the framework of phase equilibria, crystal structure, synthesis, processing, and properties. Phase equilibria are discussed in terms of the problems associated with the nucleation kinetics of mullite and the large variations observed in the solid-solution range. The incongruent melting behavior of mullite is now widely accepted. Large variations in the solid solubility from 58 to 76 mol% alumina are related to the ordering/disordering of oxygen vacancies and are strongly coupled with the method of synthesis used to form mullite. Similarly, reaction sequences which lead to the formation of mullite upon heating depend on the spatial scale at which the components are mixed. Mixing at the atomic level is useful for low-temperature (<1000°C) synthesis of mullite but not for low-temperature sintering. In contrast, precursors that are segregated are better suited for low-temperature (1250° to 1500°C) densification through viscous deformation. Flexural strength and creep resistance at elevated temperatures are significantly affected by the presence of glassy boundary inclusions; in the absence of glassy inclusions, polycrystalline mullite retains >90% of its room-temperature strength to 1500°C and displays very high creep resistance. Because of its low dielectric constant, mullite has now emerged as a substrate material in high-performance packaging applications. Interest in optical applications mainly centers on its applicability as a window material within the mid-infrared range.     

Initial cholesterol uptake by everted sacs of rat small intestine: Kinetic and thermodynamic aspects

The kinetics of initial cholesterol uptake by everted rat proximal and distal small intestinal sacs were evaluated in vitro. The mucosal incubation solution consisted of 0.05 mM cholesterol solubilized in 4.8 mM sodium taurocholate micellar solution at pH 7.4. Experiments were performed at temperatures from 26 to 38 C. The rate of cholesterol uptake followed a linear relationship when plotted against time indicating an apparent zero-order kinetics mechanism for initial uptake. An Arrhenius plot of the results of uptake versus temperature remained linear over the entire range of temperatures studied. The large free energy of activation (20 kcal/mole) suggests that an energy barrier for cholesterol uptake exists at the enterocyte luminal cell membrane and may be an important limiting step in cholesterol uptake. It is proposed that a transient association between cholesterol and a component of the enterocyte luminal cell membrane is formed during initial uptake of cholesterol. The transient association may be an activated complex formed with proteins present at or within the luminal enterocyte cell membrane.     

Thermal stability of substituted phenol-formaldehyde resins

A variety of crosslinked phenol-, or derivatized phenol-formaldehyde polymers have been synthesized. The phenol derivatives included o- and p-cresol, p-nonylphenol, m-pentadecylphenol, and raw and distilled cashew nutshell liquid. The derivatives were copolymerized with phenol and formaldehyde using sulfuric acid as catalyst to yield novolak-type prepolymers, which were then cured with hexamethylenetetramine. Thermogravimetric analysis was used to evaluate the thermal stability of the cured resins. It was found that the thermal stability of the resins decreased with increasing amounts of cashew nutshell liquid, with distilled cashew resins being slightly more thermally stable than raw cashew resins. The thermal stability of resins containing substituted phenols with alkyl chains was observed to increase from n-pentadecylphenol to cresol to phenol. The trend in thermal stability of the resins may be explained on the basis of alkyl groups being less thermally stable than aromatic rings. The amount of hexamethylenetetramine used to cure the prepolymers also influences the thermal stability of the resins. It appears that a level of 10 to 15% hexamethylenetetramine maximizes the thermal stability of the resin.     

Nanobubble generation and its applications in froth flotation (part Ⅲ): specially designed laboratory scale column flotation of phosphate

Froth flotation is used widely for upgrading raw phosphate. The flotation recovery of coarse phosphate (-1.18+0.425 mm) is much lower than that achieved on the -0.425+0.15 mm size fraction. Enhanced recovery of coarse phosphate particles is of great economic and environmental importance for phosphate industry. In this investigation, four different phosphate samples were aquired, characterized and tested in a specially designed laboratory-scale flotation column. Significant recovery improvement of coarse phosphate flotation was achieved using cavitation-generated nanobubble though its effects differ among the four testing phosphate samples. The laboratory-scale flotation column test results indicate that nanobubble increased P2O5 recovery by up to 10%-30% for a given Acid Insoluble (A.I.) rejection, depending on the characteristic of phosphate samples. The improvement ef-fect of nanobubble on the hard-to-float particles was more significant than that on easy-to-float particles, especially at lower col-lector dosages. Nanobubbles reduced the collector dosage by 1/3 to 1/2. Nanobubbles almost doubled the coarse phosphate flotation rate constant and increased the flotation selectivity index by up to 25%.     

Application of the percolation model to gelation of an epoxy resin

The percolation model has been applied to the study of gelation of the TGDDM-DDS system (tetraglycidyldiaminodiphenylmethane–diaminodiphenylsulfone) at a mass concentration of 100–30. For each temperature the experimental viscosity curves are satisfactorily described by a percolation law. Using the degree of chemical reactions, X, as a variable, a very clear change in the reaction mechanism with temperature can be shown. Then a rate of advancement of effective reactions, Y, is defined. This value only takes intermolecular-type reactions into account, and is probably the only variable on which viscosity depends in a percolation law: η = B(1 ? Y/Y_c)^?p. We obtain Y_c= 0.45 and p= 2.0. Comparing X_c and Y_c at the gel point, we obtain information on the proportion of intramolecular reactions with temperature. It is also demonstrated that the critical percolation threshold agrees closely with the gel point determined experimentally on log G″= f(t) curves.     

Tar sand extractions with microemulsions: I-the dissolution of light hydrocarbons by microemulsions using 2-butoxyethanol and diethylmethylamine as cosurfactants

For oil sand extractions with microemulsions it is important to disperse large quantities of light hydrocarbons in an aqueous medium. Fundamental studies on the properties of 2-butoxyethanol (BE) and diethylmethylamine (Et₂McN) in water suggest that these two liquids could be more effective cosurfactants than the usual alcohols used for this purpose. The phase diagrams of microemulsions using BE and Et₂MeN as cosurfactants, combined with typical ionic and non-ionic surfactants and typical aliphatic and aromatic hydrocarbons, were therefore investigated and compared with microemulsions based on n-butanol. Although the phase diagrams depend significantly on the nature of the surfactant and of the oil, the monophasic region generally increases with the cosurfactant in the order n-butanol < Et₂McN < BE. With the active mixture BE-cetyltrimethylammonium bromide, temperature has little effect on the phase diagram and NaCl generally destabilizes the microemulsion.     

β-Phellandrene: kairomone for pine engraver,Ips pini (Say) (Coleoptera: Scolytidae)

The responses ofIps pini (Scolytidae) to multiple-funnel traps baited with the pheromone, ipsdienol, and various monoterpenes were determined in stands of lodgepole pine in southern and central British Columbia.Ips pini was attracted to both ipsdienol and -phellandrene, demonstrating that -phellandrene is a kairomone for this species.Lasconotus complex (Colydiidae) and aCorticeus sp. (Tenebrionidae) were attracted to both ipsdienol and -phellandrene. TheCorticeus sp. exhibited a synergistic response to the combination of ipsdienol and -phellandrene; the responses of the other two species to the combination were additive. The predators,Thanasimus undatulus, Enoclerus sphegeus, andE. lecontei (Cleridae), were attracted to ipsdienol-baited traps, whileMonochamus clamator (Cerambycidae) andDendroctonus ponderosae (Scolytidae) were attracted to -phellandrene. Attraction of all eight species increased with increasing release rates of ipsdienol and/or -phellandrene.     

Frontline robots in tourism and hospitality: service enhancement or cost reduction?

Electronic Markets - Robots are being implemented in many frontline services, from waiter robots in restaurants to robotic concierges in hotels. A growing number of firms in hospitality and tourism...