ON THE DYNAMICS OF THE COMBUSTION OF SINGLE CHAR PARTICLES

Diffusion and reaction models of varying complexity are used to study the stability of the combustion of single char particles. In contrast to past studies which have considered only the reaction of carbon with oxygen, both the heterogeneous reactions of carbon with oxygen and carbon dioxide and the homogeneous oxidation of carbon monoxide are taken into account in the formulation of the mathematical models. Emphasis is placed on the investigation of the feasibility of occurrence of oscillatory combustion. Our results show that high rates of the C-O₂ reaction and high concentration of O₂ in the ambient favor the occurrence of multiple steady states and oscillatory solutions, but the appearance of oscillatory instability is suppressed by the homogeneous reaction in the gas phase and the presence of CO and CO₂ in the ambient. The parametric investigation of the problem reveals, in agreement with the results of past studies, that the heat capacity of the porous solid, the Lewis number, and the thickness of the stagnant film are three key parameters for the occurrence of the oscillatory response of the system. Reasonably large values of solid heat capacity practically eliminate the possibility of oscillatory combustion, but an appropriate combination of large values of stagnant film thickness and small Lewis numbers may offset the effect of solid heat capacity     

Numerical characterization and experimental verification of an in-plane MEMS-actuator with thin-film aluminum heater

In this paper, a novel concept of a thermo-mechanical MEMS actuator using aluminum thin-film heaters on a thermal oxide for electrical insulation is presented. The actuator is part of an universal tensile testing platform for thermo-mechanical material characterization of one dimensional materials on a micro- and nano-scopic scale under different environmental conditions, as varying temperatures, pressure, moisture or even vacuum and is realised in BDRIE technology. It is shown, that the actuator concept fulfills the requirements for the use in a tensile loading stage along with heterogeneously integrated nanofunctional elements, following a specimen centered approach in line with bottom-up self-assembly processes. Simulation and experiment agree very well in the thermal and mechanical domain and allow subsequent optimisation of the actuator performance.     

Single frame correction of motion artifacts in PMD-based time of flight cameras

One of the leading time of flight imaging technologies for depth sensing is based on Photonic Mixer Devices (PMD). In PMD sensors each pixel samples the correlation between emitted and received light signals. Current PMD cameras compute eight correlation samples per pixel in four sequential stages to obtain depth with invariance to signal amplitude and offset variations. With motion, PMD pixels capture different depths at each stage. As a result, correlation samples are not coherent with a single depth, producing artifacts. We propose to detect and remove motion artifacts from a single frame taken by a PMD camera. The algorithm we propose is very fast, simple and can be easily included in camera hardware. We recover depth of each pixel by exploiting consistency of the correlation samples and local neighbors of the pixel. In addition, our method obtains the motion flow of occluding contours in the image from a single frame. The system has been validated in real scenes using a commercial low-cost PMD camera and high speed dynamics. In all cases our method produces accurate results and it highly reduces motion artifacts.     

Estimating oxygen consumption from heart rate using adaptive neuro-fuzzy inference system and analytical approaches

In new approaches based on adaptive neuro-fuzzy systems (ANFIS) and analytical method, heart rate (HR) measurements were used to estimate oxygen consumption (VO₂). Thirty-five participants performed Meyer and Flenghi's step-test (eight of which performed regeneration release work), during which heart rate and oxygen consumption were measured. Two individualized models and a General ANFIS model that does not require individual calibration were developed. Results indicated the superior precision achieved with individualized ANFIS modelling (RMSE = 1.0 and 2.8 ml/kg min in laboratory and field, respectively). The analytical model outperformed the traditional linear calibration and Flex-HR methods with field data. The General ANFIS model's estimates of VO₂ were not significantly different from actual field VO₂ measurements (RMSE = 3.5 ml/kg min). With its ease of use and low implementation cost, the General ANFIS model shows potential to replace any of the traditional individualized methods for VO₂ estimation from HR data collected in the field.     

Desalination by the improved vacuum freezing high pressure ice melting process

The VFPIM process has the following advantages: It does not require a compressor nor an absorbing solution for low pressure water vapor, nor a refrigeration loop (heat pump) to reuse the heat released in the condensation or desublimation of the low pressure water vapor in supplying the latent heat of melting ice. The process uses commercially available components and can thus be operated reliably.Some of the key unit operations are similar to those in existing vacuum freezing processes, but those unique to this process are: desublimation of low pressure vapor, pumping of an ice water slush containing a high ice content, melting of ice inside a heat conductive conduit and exchange ice formation operations. An extended surface freezer was found to have several advantages over the conventional spray freezer.     

Pole placement adaptive control with persistent jumps in the plant parameters

In this paper we consider the problem of adaptively stabilizing, and providing step tracking for, an uncertain linear time-varying system. We propose an adaptive pole placement controller which solves the problem for a single-input single-output plant whose parameters switch at a moderate rate among the elements of a compact set. The output feedback controller incorporates an integrator, and its action emulates the behaviour of a pole placement state feedback compensator; the controller is periodic and mildly nonlinear, is easy to implement, is noise tolerant, and tolerates a degree of unmodelled dynamics.     

Energieinformatik

Due to the increasing importance of producing and consuming energy more sustainably, Energy Informatics (EI) has evolved into a thriving research area within the CS/IS community. The article attempts to characterize this young and highly dynamic field of research by describing current EI research topics and methods and provides an outlook of how the field might evolve in the future. It is shown that two general research questions have received the most attention so far and are likely to dominate the EI research agenda in the coming years: How to leverage information and communication technology (ICT) to (1) improve energy efficiency, and (2) to integrate decentralized renewable energy sources into the power grid. Selected EI streams are reviewed, highlighting how the respective research questions are broken down into specific research projects and how EI researchers have made contributions based on their individual academic background.     

Geschäftsmodelle

The business model concept, although a relatively new topic for research, has garnered growing attention over the past decade. Whilst it has been robustly defined, the concept has so far attracted very little substantive research. In the context of the wide-spread digitization of businesses and society at large, the logic inherent in a business model has become critical for business success and, hence, a focus for academic inquiry. The business model concept is identified as the missing link between business strategy, processes, and Information Technology (IT). The authors argue that the BISE community offers distinct and unique competencies (e.g., translating business strategies into IT systems, managing business and IT processes, etc.) that can be harnessed for significant research contributions to this field. Within this research gap three distinct streams are delineated, namely, business models in IT industries, IT enabled or digital business models, and IT support for developing and managing business models. For these streams, the current state of the art, suggest critical research questions, and suitable research methodologies are outlined.     

NMR chemical shift reagents in structural determination of lipid derivatives: IV. Methylcis- andtrans-9,10-epoxystearate and methylerythro- andthreo-9,10-dihydroxystearate

Chemical shift reagents were used to expand the amount of structural information obtainable from NMR studies of derivatives of methyl oleate and elaidate:methylcis-9,10-epoxystearate, methyltrans-9,10-epoxystearate, methyl erythro-9,10-dihydroxystearate, and methyl threo-9,10-dihydroxystearate. Chemical shift reagent studies of methyltrans-9,10-epoxystearate and methyl threo-9,10-dihydroxystearate afforded the most information. Chemical shift reagent studies of methylcis-9,10-epoxystearate and methyl erythro-9,10-dihydroxystearate were decidedly inferior. The series of complementary interpretive techniques previously developed during chemical shift reagent studies of monofunctional fatty esters and model polyfunctional fatty esters were found to be applicable in the current study. However, to avoid ambiguity in several proton assignments, supplementary spin decoupling experiments were necessary.     

NMR chemical shift reagents in structural determination of lipid derivatives: II. Methyl petroselinate and methyl oleate

Whentris(1,1,1,2,2,3,3-heptafluoro-7,7-dimethyl-4,6-octaneodionato)europium (III)—Eu(fod)₃—forms a complex with a sufficiently basic functional group in a donor molecule, the change in the magnetic environment of protons near the coordination site causes their nuclear magnetic resonance (NMR) signals to shift to different positions. Consequently Eu(fod)₃ and other compounds that similarly affect NMR signals have been designated chemical shift reagents (csr). Because of their ability to shift proton signals, csr substantially increase the amount of structural information that can be obtained from NMR spectroscopy, frequently converting complicated splitting patterns into first-order spectra. Some generally useful experimental and interpretive csr techniques are described here using methyl petroselinate and methyl oleate as examples. Csr studies of methyl petroselinate reveal that the position of the double bond is at C-6, and that there is no chain substitution or branching before C-9. Csr studies of methyl oleate reveal that the position of the double bond is at or beyond C-9, and that there is no chain substitution or branching before C-6. Some suggestions are presented for expanding the amount of structural information that can be obtained by csr studies of unsaturated lipid derivatives. Presented in part at AOCS Meeting, Atlantic City, October, 1971.