Numerical simulation of soot filtration and combustion within diesel particulate filters

The numerous benefits offered by diesel engines, compared to gasoline ones, are balanced by a drawback of increasing concern, namely soot emissions. Nowadays, soot emissions can be reduced by physically trapping the particles within on-board diesel particulate filters (DPF). The filter gets progressively loaded by filtering the soot laden flue gases, thus causing an increasing pressure drop, until regeneration takes place. The aim of this work is to develop a fully predictive three-dimensional mathematical model able to accurately describe the soot deposition process into the filter, the consequent gradual modification of the properties of the filter itself (i.e. permeability and porosity), the formation of a soot filtration cake, and the final regeneration step. The commercial computational fluid dynamics (CFD) code Fluent 6.2.16, based on a finite-volume numerical scheme, is used to simulate the gas and particulate flow fields in the DPF, whereas particle filtration sub-models and regeneration kinetics are implemented through user-defined-subroutines (UDS).Model predictions highlight uneven soot deposition profiles in the first steps of the filtration process; however, the very high resistance to the gas flow of the readily formed cake layer determines the evolution into an almost constant layer of soot particles. The ignition of the loaded soot was simulated under different operating conditions, and two regeneration strategies were investigated: a “mild regeneration” at low temperature and oxygen concentration, that operated a spatially homogeneous ignition of the deposited soot, and a “fast regeneration”, with an uneven soot combustion along the axial coordinate of the filter, due to strong temperature gradients inside the filter itself. These findings are supported by comparison and validation with experimental data.     

Sub-critical fouling in a membrane bioreactor for municipal wastewater treatment: experimental investigation and mathematical modelling

Fouling is a major limitation for the application of membrane bioreactors (MBRs) in municipal wastewater treatment; the critical flux concept represents a valid tool for process optimisation in planning fouling control strategies. The paper presents the results obtained on a large pilot MBR equipped with a plate-and-frame ultrafiltration membrane. The experimental assessment of flux criticality was carried out by flux-stepping tests showing the positive impact of liquid temperature on the value of the critical threshold. The reliability of short-term tests was then verified over a long period by determining the time of sustainability, t(sust), of six different sub-critical fluxes ranging between 17 and 30Lm(-2)h(-1). An exponential fitting was observed in terms of fouling rate both before and after t(sust), though fouling after t(sust) is likely to be ascribed not only to cake formation. Finally, a new mathematical formulation was proposed according to the local flux approach to model the sub-critical TMP transients. The model involves both bound and free forms of EPS and, once experimentally calibrated, it provided a fair prediction of the TMP jump.     

Evaluation of potential human health risk associated with consumption of edible products from livestock fed ration supplemented with Red Lake Diatomaceous Earth

ABSTRACT

Red Lake Diatomaceous Earth (DE) is a naturally occurring blend of diatomaceous earth and calcium bentonite that can be used as an anti-caking agent in animal feed and contains naturally occurring dioxins. A quantitative risk assessment was conducted to assess potential human health risk associated with consumption of edible tissues from livestock exposed to dioxins via feed containing Red Lake DE. Empirical data characterising the transfer of dioxins to eggs and other tissues in chickens demonstrate that resulting concentrations in eggs are lower than those found in the general food supply. These data also provided product-specific input for a risk assessment conducted both with default parameters and with media-specific input from the feed study. Results demonstrate that exposure to dioxins in edible tissue from livestock that consumed Red Lake DE in feed would not be associated with an increased risk to humans. Findings from this assessment highlight the utility and importance of accounting for bioavailability as part of health-based risk assessment and provide information critical to risk managers in determining the safe use of Red Lake DE as an anticaking agent in livestock and pet feed.     

A multi-agent architecture for plug and produce on an industrial assembly platform

Modern manufacturing companies face increased pressures to adapt to shorter product life cycles and the need to reconfigure more frequently their production systems to offer new product variants. This paper proposes a new multi-agent architecture utilising “plug and produce” principles for configuration and reconfiguration of production systems with minimum human intervention. A new decision-making approach for system reconfiguration based on tasks re-allocation is presented using goal driven methods. The application of the proposed architecture is described with a number of architectural views and its deployment is illustrated using a validation scenario implemented on an industrial assembly platform. The proposed methodology provides an innovative application of a multi-agent control environment and architecture with the objective of significantly reducing the time for deployment and ramp-up of small footprint assembly systems.     

CFD model performance benchmark of fast filling simulations of hydrogen tanks with pre-cooling

High gas temperatures can be reached inside a hydrogen tank during the filling process because of the large pressure increase (up to 70–80 MPa) and because of the short time (∼3 min) of the process. High temperatures can potentially jeopardize the structural integrity of the storage system and one of the strategies to reduce the temperature increase is to pre-cool the hydrogen before injecting it into the tank. Computational Fluid Dynamics (CFD) tools have the capabilities of capturing the flow field and the temperature rise in the tank. The results of CFD simulations of fast filling with pre-cooling are shown and compared with experimental data to assess the accuracy of the CFD model.     

Measurement of ultimate tensile strength and Young modulus in LYSO scintillating crystals

Scintillating crystals are employed in high energy physics, in medical imaging, diagnostic and security. Two mechanical properties of lutetium-yttrium oxyorthosilicate cerium-doped Lu_2(1−x)Y_2xSiO₅:Ce with x=0.1 (LYSO) crystals have been measured: the ultimate tensile stress (σ_UTS) and the Young elastic modulus (E). Measurements are made by means of a 4-points loading device and the experimental results account for an elastic-brittle stress-strain relation, which depends heavily on the specimen preparation and the material defects. σ_UTS along the [0 1 0] tensile direction ranges within 68.14 and 115.61 MPa, which, in the lowest case, is more than twice with respect to those measured for PbWO₄ (PWO), exhibiting a marked difference between the annealed and the not-annealed samples. The mean elastic modulus (E), along the same direction, is E=1.80×10¹¹ (±2.15×10¹⁰) N/m², with lower dispersion respect to UTS data. This type of analysis and study can be included into quality control procedures of crystals, based on samples taken out of production; such procedures can be established for industrial processing of crystals aimed to the high energy physics (calorimeters) and medical imaging (PET, etc.) applications.