Computed microtomography evaluation of calcium hydroxide‐based root canal dressing removal from oval root canals by different methods of irrigation

The aim of this study was to evaluate the capacity of conventional irrigation, passive ultrasonic irrigation (PUI), and Easy Clean for removing calcium hydroxide‐based root canal dressing from oval root canals. Thirty mandibular uniradicular incisors with oval canals were used, and subjected to chemical–mechanical preparation with Reciproc R40 instruments. The main canal was filled with a paste based on Ca(OH)₂ P.A., iodoform and propylene glycol in the ratio of 3:1:1. The teeth were stored in 100% humidity at a temperature of 37°C for 14 days. Afterwards, the teeth were divided into three groups (n = 10) according to the method of irrigation used (conventional irrigation, PUI, and Easy Clean). The specimens were analyzed by computed microtomography at three time intervals: before placing the root canal dressing, with the root canal dressing in place, and after application of the irrigation methods for removing it. The data were submitted to Kruskal–Wallis and Dunn tests for analyzing the canal as a whole, and Friedman and Dunn for analyzing the root thirds. The results showed that conventional irrigation was less efficient for removing the root canal dressing in comparison with the methods that agitated the irrigant solution (p < .05). When the root canal was analyzed as a whole, Easy Clean, and PUI were similar (p > .05). In analysis of the thirds, Easy Clean was more efficient than conventional irrigation in all the thirds, while PUI showed this behavior only in the cervical third (p < .05). The authors concluded that in oval canals, none of the irrigation methods were capable of removing all the root canal dressing, however, the methods that agitated the irrigant solution were more efficient than conventional irrigation.     

Different bacterial models for in vitro induction of non‐cavitated enamel caries‐like lesions: Microhardness and polarized light miscroscopy analyses

The aim of this study was to compare different bacterial models for in vitro induction of non‐cavitated enamel caries‐like lesions by microhardness and polarized light microscopy analyses. One hundred blocks of bovine enamel were randomly divided into four groups (n = 25) according to the bacterial model for caries induction: (A) Streptococcus mutans, (B) S. mutans and Lactobacillus acidophilus, (C) S. mutans and L. casei, and (D) S. mutans, L. acidophilus, and L. casei. Within each group, the blocks were randomly divided into five subgroups according to the duration of the period of caries induction (4–20 days). The enamel blocks were immersed in cariogenic solution containing the microorganisms, which was changed every 48 h. Groups C and D presented lower surface hardness values (SMH) and higher area of hardness loss (ΔS) after the cariogenic challenge than groups A and B (P < 0.05). As regards lesion depth, under polarized light microscopy, group A presented significantly lower values, and groups C and D the highest values. Group B showed a higher value than group A (P < 0.05). Groups A and B exhibited subsurface caries lesions after all treatment durations, while groups C and D presented erosion‐type lesions with surface softening. The model using S. mutans, whether or not it was associated with L. acidophilus, was less aggressive and may be used for the induction of non‐cavitated enamel caries‐like lesions. The optimal period for inducing caries‐like lesions was 8 days. Microsc. Res. Tech. 78:444–451, 2015. © 2015 Wiley Periodicals, Inc.     

Use of Spreadsheets as an Introductory Tool for Solving Fluid-Structure Interaction Problem

A simple and intuitive manner for solving fluid-structure interaction problem has been developed using Microsoft Excel spreadsheets. By eliminating the need of previous knowledge of any programming language, the method appears as an interesting introduction to numerical solutions of partial differential equations, due to the direct and didactic way that it is developed. Proposed procedure enables the analysis of tridimensional geometries using the finite difference method and can be extended to other differential equations or boundary conditions. The author＇s objective in this paper is to develop a simple and reliable preliminary method for solving acoustic fluid-structure interaction problems with application to dam-reservoir interaction phenomena and also contribute in the educational growth for undergraduate students that are beginning research in such matter.     

Meteorological and oceanographic conditions in the northern Adriatic Sea during the period June 1999-July 2002: influence on the mucilage phenomenon

Mucilage events (formation of very large organic aggregates and gelatinous surface layers) have been documented several times during the past two centuries in the northern Adriatic Sea (NA), while their frequency has significantly increased since 1988. In this work, meteorological and oceanographic conditions in the NA during the period June 1999-July 2002 are described and their relation to the outbreak and fate of the mucilage phenomenon was investigated. Salinity and temperature data were collected during approximately monthly cruises along three transects in the NA. Relevant meteorological situations (air temperature, rainfall, wind) were selected from large-scale ECMWF analyses and from the Local Analysis and Prediction System (LAPS; Emilia Romagna Meteorological Service), while sea conditions (waves) were analysed by means of the Wave Adriatic Model (WAM). Data for air temperature, rainfall, and wind from several meteorological stations in the region were used. Average seasonal cycles of sea temperature and salinity simulated with statistical models, based on historical data collected in the NA since 1972, were used to determine thermal and haline anomalies. The monthly anomaly variability of maximum and minimum air temperatures, rainfall amount and number of rainy days did not appear to be relevant for the mucilage phenomenon outbreak. In contrast, both vertical and horizontal thermohaline gradients in the region were more developed during late spring and summer of 2000 and particularly of 2002, when the mucilage events were of greatest extent in space and time, compared to 2001 (short-lived event) and 1999 (no event). These more pronounced gradients were due to a combination of several unusual conditions: sharp heating of the sea surface in May-June, domination of eastwards transport of freshened waters formed in the Po Delta area, and intrusion of very high salinity intermediate waters originating in the eastern Mediterranean. Moreover, in winter of both 2000 and 2002 very dense and cold water formed and remained in the bottom layer until spring, contributing to increase the stratification degree of the water column. The duration of the mucilage events and their spatial distribution in the region depend strongly on meteorological changes. Recurrent anticyclonic conditions, characterized by low wind and calm sea, favour extended events in time (up 2 months in 2002). In contrast, highly perturbed weather, particularly due to strong "bora" wind, can be determined in sharp decay of the event (e.g. in July 2000).     

Comprehensive nanostructural study of SSRM nanocontact on silicon

Scanning Spreading Resistance Microscopy electro-mechanical nanocontacts are nowadays well understood and numerous influent parameters have been identified (bias, load, surface state sample, radius of curvature of the tip). Despite several simulation and modelization possibilities, calibration curves are required to ensure reliable electrical characterizations. In this paper, we bring, through nanostructural studies (Scanning Transmission Electron Microscopy) of surface state of both SSRM tips and doped silicon surface a new understanding of tip-sample interaction during SSRM measurements. As a result of load, a nanometric residual amorphous silicon layer was observed which thickness depends on applied force and might be due to as well to the plastic transformation (Si to β-tin phase) as to plough-effect residues resulting from the tip indentation into the sample. It appears thus important in a failure analysis process to find the best compromise between stable electrical SSRM response and sample/tip surface degradation.     

Characterisation of Signal Modality: Exploiting Signal Nonlinearity in Machine Learning and Signal Processing

A novel method for online tracking of the changes in the nonlinearity within both real-domain and complex–valued signals is introduced. This is achieved by a collaborative adaptive signal processing approach based on a hybrid filter. By tracking the dynamics of the adaptive mixing parameter within the employed hybrid filtering architecture, we show that it is possible to quantify the degree of nonlinearity within both real- and complex-valued data. Implementations for tracking nonlinearity in general and then more specifically sparsity are illustrated on both benchmark and real world data. It is also shown that by combining the information obtained from hybrid filters of different natures it is possible to use this method to gain a more complete understanding of the nature of the nonlinearity within a signal. This also paves the way for building multidimensional feature spaces and their application in data/information fusion.     

Hybrid Photonic Nanostructures by In Vivo Incorporation of an Organic Fluorophore into Diatom Algae

Biotechnological processes harnessing living organisms' metabolism are low‐cost routes to nanostructured materials for applications in photonics, electronics, and nanomedicine. In the pursuit of photonic biohybrids, diatoms microalgae are attractive given the properties of the porous micro‐to‐nanoscale structures of the biosilica shells (frustules) they produce. The investigations have focused on in vivo incorporation of tailored molecular fluorophores into the frustules of Thalassiosira weissflogii diatoms, using a procedure that paves the way for easy biotechnological production of photonic nanostructures. The procedure ensures uniform staining of shells in the treated culture and permits the resulting biohybrid photonic nanostructures to be isolated with no damage to the dye and periodic biosilica network. Significantly, this approach ensures that light emission from the dye embedded in the isolated biohybrid silica is modulated by the silica's nanostructure, whereas no modulation of photoluminescence is observed upon grafting the fluorophore onto frustules by an in vitro approach based on surface chemistry. These results pave the way to the possibility of easy production of photonic nanostructures with tunable properties by simple feeding the diatoms algae with tailored photoactive molecules.     

Detection techniques for fading multipath channels with unresolvedcomponents

In this paper we consider noncoherent detection structures for multipath Ricean/Rayleigh fading channels. The multipath components are assumed to be unresolved, with known delays. These delays could have been estimated, for example, by using super-resolution techniques or sounding the channel with a wide-band pulse. We show that the Rayleigh channel optimum receiver (R OPT) consists of an “orthogonalization” (or decorrelation) stage and then it implements an optimum decision rule for a resolved multipath channel. Since the optimum decision rule over Ricean channels is in general too complex for implementation, we propose several suboptimum structures such as the quadratic decorrelation receiver (QDR) and the quadratic receiver (QR). The QDR scheme exploits the decorrelation performed on the input samples. The nonlinear term due to the Ricean specular term is replaced by a quadratic form that is more suitable for implementation. Single-pulse performance of these schemes are studied for commonly used binary modulation formats such as FSK and DPSK. This paper shows that it is possible to have diversity-like gains over Ricean/Rayleigh multipath fading channels with unresolved components even if the channel is not fully tracked. Furthermore, this paper demonstrates the importance of using generalizations of RAKE receivers designed to handle the unresolvability condition. For two-path mixed-mode Ricean/Rayleigh channels, it is shown that improved performance can be obtained by using receivers that know the strength of the Ricean specular term