EXPERIMENTAL STUDIES OF NEW TECHNOLOGY ON HIGH GLOSSINESS GRANITE SURFACE

On the basis of analysing thecharacter of granite and its polishingtechnology,the authors have manufactureda kind of polishing disk to polish graniteand good results have been obtained.Through studying the polishing process ofgranite in theory and experiment,theauthors think that the high glossinesssurface is the result of grinding ofabrasives and adhering of soft metal.Moreover,orthogonal test is carried outabout the technical parameters for threeetypical kinds of granites and some usefulresults for production are obtained.     

中国参考人系列模型的建立及外照射剂量学特征的研究

为探讨不同人种、不同姿势及新的组织权重因子对人体剂量学的影响,建立了基于GBZ/T200的中国参考人系列模型（包括立姿、坐姿、走姿的男女模型）;结合蒙特卡罗程序计算得到不同射线能量、6种标准照射方式下的器官吸收剂量和有效剂量。结果表明,基于不同权重因子和不同种族参考模型可得到不同的有效剂量,尤其是低能阶段的差异较为明显;姿势的改变使得器官剂量和有效剂量有所变化,主要由于器官之间的屏蔽作用,体现在相对立姿时坐姿前后照射的有效剂量减小和走姿左右照射的有效剂量增加。进行辐射剂量学评估时,在低能阶段不同的影响因素对结果有较大的影响,而高能时不太明显,因此在进行医学影像等复杂辐射场的辐射防护工作时应注重实际情况的考虑。     

基于蒙特卡罗方法的复合材料辐射屏蔽设计北大核心CSCD

在乏燃料后处理厂的工作环境中可能存在着低能中子-γ射线混合辐射,严重威胁工作人员的人身安全。本文针对上述混合辐射环境,利用蒙特卡罗程序Geant4模拟计算了一种钨/硼纤维增强含硼/铋聚合物复合材料中不同材料参数对低能中子和γ射线综合防护效果的影响。结果显示,此种钨/硼纤维复合材料对低能中子和γ射线均具有良好的屏蔽效果。文章证实了纤维垂直排布方式具有比平行排布方式更优的屏蔽效果,且垂直排布方式下透过粒子束的强度分布更加均匀。此外,在聚合物基体中掺杂一定质量分数的硼/铋可以进一步增强复合材料的辐射屏蔽效果。依据这些结果我们认为此种复合材料可以为后处理厂等辐射环境中的防护服及相关防护用具提供参考。     

Amyloid Formation in Nanoliter Droplets

Processes that monitor the nucleation of amyloids and characterize the formation of amyloid fibrils are vital to medicine and pharmacology. In this study, we observe the nucleation and formation of lysozyme amyloid fibrils using a facile microfluidic system to generate nanoliter droplets that can control the flow rate and movement of monomer-in-oil emulsion droplets in a T-junction microchannel. Using a fluorescence assay, we monitor the nucleation and growth process of amyloids based on the volume of droplets. Using the microfluidic system, we demonstrate that the lag phase, which is vital to amyloid nucleation and growth, is reduced at a lower droplet volume. Furthermore, we report a peculiar phenomenon of high amyloid formation at the edge of a bullet-shaped droplet, which is likely due to the high local monomer concentration. Moreover, we discovered that amyloid fibrils synthesized in the nanoliter droplets are shorter and thicker than fibrils synthesized from a bulk solution via the conventional heating method. Herein, a facile procedure to observe and characterize the nucleation and growth of amyloid fibrils using nanoliter droplets is presented, which is beneficial for investigating new features of amyloid fibril formation as an unconventional synthetic method for amyloid fibrils.     

体育场馆照明工程常见问题与解决方法

随着大量的各种类型的体育场馆的兴建,体育场馆的照明工程成为建筑电气行业的一个重要分支.在场馆建设时应根据实际需要进行照明设计和施工,做到场馆的照明满足体育赛事在安全、可靠、达标方面的要求,并且兼顾赛时与赛后照明设施的充分利用,达到既经济又实用的目的.体育场馆照明工程设计和施工中存在一些常见的缺陷,在设计和施工中应认真加以研究,以保证工程的质量.     

动态搜索算法求解时间依赖型旅行商问题研究

时间依赖型旅行商问题(TDTSP)是旅行商问题(TSP)的延伸.在该问题中,任意两节点间的旅行时间(成本)不仅取决于节点间的距离,还依赖于一天中具体时段或节点在哈密顿圈中所处的具体位置.对基于节点所处哈密顿圈中具体位置的TDTSP问题建立相应的数学模型,并提出求解该问题的动态搜索算法.通过实验仿真,验证了动态搜索算法优于目前在邻域搜索领域求解该问题最有效的动态规划启发式算法.     

基于Internet的无线Mesh网络节点接入策略

针对无线Mesh网络模型在整体性能和稳定性方面存在的缺陷,利用无线节点特性引入一种适用于Internet接入的无线Mesh网络模型——FIA—WMN网络模型,并提出该模型上的节点接入控制策略。仿真实验结果表明,该模型及接入策略能有效改善无线Mesh网络的性能。     

超热中子束慢化材料的特性分析

用一维离散坐标程序ＡＮＩＳＮ计算了多元素的三群群截面,筛选出可用于组成超热中子束慢化材料的１１种元素;分析了上述１１种元素所构成的单质、化合物和混合物的慢化特性,从中优选出可实现超热中子束的三种慢化材料。     

Realizing simultaneously enhanced energy and power density fullcell construction using mixed hard carbon/Li_4Ti_5O_(12) electrode

Practical applications of lithium-ion batteries(LIBs) with both high energy and power density are urgently demanded,which require suitable charge/discharge platform,fast charge-transfer kinetics,as well as optimal solid electrolyte interphase(SEI) layer of electrode materials.In this work,a high-performance lithium-ion battery(LIB) full cell was assembled by using commercial LiNi_(0.33)Co_(0.33)Mn_(0.33)O_2(NCM111) as the positive electrode and mixed Li_4 Li_5 O_(12)(LTO)/hard carbon(HC) as the negative electrode.It reveals that the component ratio between LTO and HC plays a critical role in manipulating the electric conductivity and the electro-reaction platform.The electrochemical test results show that when the content of HC is 10 wt%,the as-constructed full cell demonstrates the best electrochemical,with a maximum energy density of 149.2 Wh·kg~(-1) and a maximum power density of2195 W·kg~(-1) at 10 A·g~(-1)(30 C).This outperforms all the assembled systems within our work range and the state-ofthe-art literatures.The NCM//Li_4 Ti_5 O_(12)+10 wt% HC battery system also exhibits a good capacity retention after1000 cycles at the current density of 1 A·g~(-1).This work provides a new approach to enhance the full-cell performance by mixing electrode materials with different charge potentials and reaction kinetics.     

Matisse: A System-on-Chip Design Methodology Emphasizing Dynamic Memory Management

MATISSE is a design environment intended for developing systems characterized by a tight interaction between control and data-flow behavior, intensive data storage and transfer, and stringent real-time requirements. Matisse bridges the gap from a system specification, using a concurrent object-oriented language, to an optimized embedded single-chip hardware/software implementation. Matisse supports stepwise exploration and refinement of dynamic memory management, memory architecture exploration, and gradual incorporation of timing constraints before going to traditional tools for hardware synthesis, software compilation, and inter-processor communication synthesis. With this approach, specifications of embedded systems can be written in a high-level programming language using data abstraction. Application of MATISSE on telecom protocol processing systems in the ATM area shows significant improvements in area usage and power consumption.