Synthesis,calcination and characterization of Nanosized ceria powders by self-propagating room temperature method

Nanometric ceria powders with fluorite-type structure were obtained by applying self-propagating room temperature method. The obtained powders were subsequently thermally treated (calcined) at different temperatures for different times. Powder properties such as specific surface area, crystallite size, particle size and lattice parameter have been studied. Roentgen diffraction analysis (XRD), BET and Raman scattering measurements were used to characterize the as-obtained (uncalcined) powder as well as powders calcined at different temperatures.It was found that the average diameter of the as-obtained crystallites is in the range of 3–5 nm whereas the specific surface area is about 70 m²/g. The subsequent, 15 min long, calcination of as-obtained powder at different temperatures gradually increased crystallite size up to ～60 nm and reduced specific surface down to 6 m²/g. Raman spectra of synthesized CeO_2?y depicts a strong red shift of active triply degenerate F_2 g mode as well as additional peak at 600 cm^?1. The frequency of F_2 g mode increased while its line width decreased with an increase in calcination temperature. Such a behavior is considered to be the result of particle size increase and agglomeration during the calcination. After the heat treatment at 800 °C crystallite size reached value larger than 50 nm. Second order Raman mode, which originates from intrinsic oxygen vacancies, disappeared after calcination.     

Phase-synchroniser based on gm-C all-pass filter chain with sliding mode control

Phase-synchronisers have many applications in VLSI circuit designs. They are used in CMOS RF circuits including phase (de)modulators, phase recovery circuits, multiphase synthesis, etc. In this article, a phase-synchroniser based on g_m-C all-pass filter chain with sliding mode control is presented. The filter chain provides good controllable delay characteristics over the full range of phase and frequency regulation, without deterioration of input signal amplitude and waveform, while the sliding mode control enables us to achieve fast and predetermined finite locking time. IHP 0.25 µm SiGe BiCMOS technology has been used in design and verification processes. The circuit operates in the frequency range from 33 MHz up to 150 MHz. Simulation results indicate that it is possible to achieve very fast synchronisation time period, which is approximately four time intervals of the input signal during normal operation, and 20 time intervals during power-on.     

Investigation on thermal radiation spectra of coal ash deposits

This paper deals with thermal radiation properties of ash deposits on a pulverized coal boiler of an electric power plant. Normal emittance spectra in the 2.5–25 μm interval, and total normal emittance, were measured on 4 kinds of ash layers of a mm magnitude order thickness, at 560 → 1460 → 560 K in heating and cooling. It was found that ash powder layers are opaque for infrared radiation. The emittance increases with ash radiation wavelength and temperature. Ash powder is sintered and fused above 1200 K. The emittance of the sintered layer is above that of the unsintered layer. The authors propose, and explain by an example, correlating the experimentally obtained emittance spectra of ash deposits with a continuous curve, the formula of which defines the dependence of emittance on wavelength and temperature, i.e. ε = ε(λ,Т). Use of this formula, with parameter values determined by the proposed methodology, may greatly simplify the practical application of the experimentally determined emittances in the thermal design of existing and new steam boiler furnaces.     

Pt/C doped by MoOx as the electrocatalyst for oxygen reduction and methanol oxidation

The oxidation of methanol and reduction of oxygen were studied on MoO_x–Pt/C nano-catalysts prepared by the polyole method combined by MoO_x post-deposition. The catalysts were characterized by TEM and EDX. The presented composition of the electrode is very similar to the nominal ones and post-deposited MoO_x species block only a small fraction of the active Pt particle surface area. MoO_x deposition on the carbon support can be ruled out from the EDX results and the low mobility of these oxides at corresponding conditions. The electrode catalytic activity in the electrooxidation of methanol and the reduction of oxygen was studied by steady-state voltammetry and cyclic voltammetry. MoO_x–Pt/C catalyst exhibits higher catalytic activity than Pt/C for the oxygen reduction. The catalytic effect in oxidation of methanol is achieved only under potentiodynamic conditions, when poisoning species have no enough time to develop fully.     

Regulation of S100As Expression by Inflammatory Cytokines in Chronic Lymphocytic Leukemia

The calcium-binding proteins S100A4, S100A8, and S100A9 are upregulated in chronic lymphocytic leukemia (CLL), while the S100A9 promotes NF-κB activity during disease progression. The S100-protein family has been involved in several malignancies as mediators of inflammation and proliferation. The hypothesis of our study is that S100A proteins are mediators in signaling pathways associated with inflammation-induced proliferation, such as NF-κB, PI3K/AKT, and JAK/STAT. The mononuclear cells (MNCs) of CLL were treated with proinflammatory IL-6, anti-inflammatory IL-10 cytokines, inhibitors of JAK1/2, NF-κB, and PI3K signaling pathways, to evaluate S100A4, S100A8, S100A9, and S100A12 expression as well as NF-κB activation by qRT-PCR, immunocytochemistry, and immunoblotting. The quantity of S100A4, S100A8, and S100A9 positive cells (p < 0.05) and their protein expression (p < 0.01) were significantly decreased in MNCs of CLL patients compared to healthy controls. The S100A levels were generally increased in CD19⁺ cells compared to MNCs of CLL. The S100A4 gene expression was significantly stimulated (p < 0.05) by the inhibition of the PI3K/AKT signaling pathway in MNCs. IL-6 stimulated S100A4 and S100A8 protein expression, prevented by the NF-κB and JAK1/2 inhibitors. In contrast, IL-10 reduced S100A8, S100A9, and S100A12 protein expressions in MNCs of CLL. Moreover, IL-10 inhibited activation of NF-κB signaling (4-fold, p < 0.05). In conclusion, inflammation stimulated the S100A protein expression mediated via the proliferation-related signaling and balanced by the cytokines in CLL.     

Reorganization of the Brain Extracellular Matrix in Hippocampal Sclerosis

The extracellular matrix (ECM) is an important regulator of excitability and synaptic plasticity, especially in its highly condensed form, the perineuronal nets (PNN). In patients with drug-resistant mesial temporal lobe epilepsy (MTLE), hippocampal sclerosis type 1 (HS1) is the most common histopathological finding. This study aimed to evaluate the ECM profile of HS1 in surgically treated drug-resistant patients with MTLE in correlation to clinical findings. Hippocampal sections were immunohistochemically stained for aggrecan, neurocan, versican, chondroitin-sulfate (CS56), fibronectin, Wisteria floribunda agglutinin (WFA), a nuclear neuronal marker (NeuN), parvalbumin (PV), and glial-fibrillary-acidic-protein (GFAP). In HS1, besides the reduced number of neurons and astrogliosis, we found a significantly changed expression pattern of versican, neurocan, aggrecan, WFA-specific glycosylation, and a reduced number of PNNs. Patients with a lower number of epileptic episodes had a less intense diffuse WFA staining in Cornu Ammonis (CA) fields. Our findings suggest that PNN reduction, changed ECM protein, and glycosylation expression pattern in HS1 might be involved in the pathogenesis and persistence of drug-resistant MTLE by contributing to the increase of CA pyramidal neurons’ excitability. This research corroborates the validity of ECM molecules and their modulators as a potential target for the development of new therapeutic approaches to drug-resistant epilepsy.     

Distributed Computation Multi-agent System

This article addresses a formal model of a distributed computation multi-agent system. This model has evolved from the experimental research on using multi-agent systems as a ground for developing fuzzy cognitive maps. The main paper contribution is a distributed computation multi-agent system definition and mathematical formalization based on automata theory. This mathematical formalization is tested by developing distributed computation multi-agent systems for fuzzy cognitive maps and artificial neural networks – two typical distributed computation systems. Fuzzy cognitive maps are distributed computation systems used for qualitative modeling and behavior simulation, while artificial neural networks are used for modeling and simulating complex systems by creating a non-linear statistical data model. An artificial neural network encapsulates in its structure data patterns that are hidden in the data used to create the network. Both of these systems are well suited for formal model testing. We have used evolutionary incremental development as an agent design method which has shown to be a good approach to develop multi-agent systems according to the formal model of a distributed computation multi-agent system.     

Non-iterative parameter estimation of the 2R-1C model suitable for low-cost embedded hardware

Frontiers of Information Technology & Electronic Engineering - Parameter estimation of the 2R-1C model is usually performed using iterative methods that require high-performance processing...