S matrix of slot-coupled H-plane tee junctionusing rectangular waveguides

Complex scattering matrix parameters of a slot-coupled, waveguide tee junction are determined using a moment method of analysis with entire orthogonal basis functions and a rigorous analysis of the effect of wall thickness. The variations of the equivalent network parameter, coupling, and return loss with frequency are evaluated, and the results are compared with experimental data. The unitary property of the S matrix is verified. The dependence of coupling on slot length, slot width, and thickness is presented     

Highly coherent electronically tunable waveguide extended cavity diode laser

A frequency agile extended cavity diode laser using an integrated Bragg reflector in a Ti : Fe : LiNbO/sub 3/ waveguide is developed and characterized. The laser emits up to 7 mW in the 1.5-/spl mu/m telecommunication window. The emission spectrum exhibits a 18-kHz linewidth, >40-dB sidemode suppression ratio, and a wavelength stability of /spl plusmn/1 pm over hours. Very fast mode hop-free frequency tuning is achieved through the electrooptic effect, with a tuning slope of 55.5 MHz/V.     

Development of Optical Code Division Multiple Access Based System Using Spectral Amplitude Coding via Fiber Bragg Gratings (FBGs)

Wireless Personal Communications - The multiple user’s based transmission systems are developed in the past using various multiple access techniques for fibre optic communications. Among...     

High Precision,Electrochemical Detection of Reversible Binding of Recombinant Proteins on Wide Bandgap GaN Electrodes Functionalized with Biomembrane Models

We report a novel hybrid charge sensor realized by the deposition of phospholipid monolayers on highly doped n‐GaN electrodes. To detect the binding of recombinant proteins with histidine‐tags, lipid vesicles containing chelator lipids were deposited on GaN electrodes pre‐coated with octadecyltrimethoxysilane monolayers. Owing to its optical transparency, GaN allows the confirmation of the fluidity of supported membranes by fluorescence recovery after photo‐bleaching (FRAP). The electrolyte‐(organic) insulator‐semiconductor (EIS) setup enables one to transduce variations in the surface charge density ΔQ into a change in the interface capacitance ΔC _p and, thus, the flat‐band potential ΔU _FB. The obtained results demonstrate that the membrane‐based charge sensor can reach a high sensitivity to detect reversible changes in the surface charge density on the membranes by the formation of chelator complexes, docking of eGFP with histidine tags, and cancellation by EDTA. The achievable resolution of ΔQ ≥ 0.1 μC/cm² is better than that obtained for membrane‐functionalized p‐GaAs, 0.9 μC/cm², and for ITO coated with a polymer supported lipid monolayer, 2.2 μC/cm². Moreover, we examined the potential application of optically active InGaN/GaN quantum dot structures, for the detection of changes in the surface potential from the photoluminescence signals measured at room temperature.     

双金属ZnAu纳米团簇的光学性质及生物成像应用

为了优化Au纳米团簇(nanoclusters,NCs)的光 学性能,拓宽它的应用领域,利用原子掺杂法合成 了超稳定的发光双金属ZnAu NCs。通过对紫外-可见吸收光谱、发射光谱、红外光谱、荧光 寿命等的测试 和分析,研究了合成的ZnAu NCs的光学特性,讨论了Zn原子掺杂对Au NCs发光性能的影响, 并且借 助透射电子显微镜和质谱等表征手段,分析了这种光学材料的结构性质。最后,通过细胞毒 性评估以及细 胞成像实验探究了其在生物医学上的应用。研究结果表明,与未掺杂原子的Au NCs相比,掺 杂Zn原子的 ZnAu NCs的荧光强度增强了3倍左右,荧光寿命也从6.73 μs延长到 7.26 μs。此外,结合 质谱确定了超小 的ZnAu NCs是分子量位于5.0 kDa－5.8 kDa之 间的复合物团簇。这种发光纳米材料所表现出的良好的光稳 定性和低细胞毒性,使其在生物成像领域具有潜在的应用价值。同时,Zn原子的掺杂提升了 Au NCs的光学性能,为其在其它领域的广泛应用提供了更大的可能性。     

Design of efficient lightweight strategies to combat DoS attack in delay tolerant network routing

Delay tolerant networks (DTNs) are characterized by delay and intermittent connectivity. Satisfactory network functioning in a DTN relies heavily on co-ordination among participating nodes. However, in practice, such co-ordination cannot be taken for granted due to possible misbehaviour by relay nodes. Routing in a DTN is, therefore, vulnerable to various attacks, which adversely affect network performance. Several strategies have been proposed in the literature to alleviate such vulnerabilities—they vary widely in terms of throughput, detection time, overhead etc. One key challenge is to arrive at a tradeoff between detection time and overhead. We observe that the existing table-based reactive strategies to combat Denial-of-service (DoS) attacks in DTN suffer from two major drawbacks: high overhead and slow detection. In this paper, we propose three secure, light-weight and time-efficient routing algorithms for detecting DoS attacks (Blackhole and Grey-hole attacks) in the Spray & Focus routing protocol. The proposed algorithms are based on use of a small fraction of privileged (trusted) nodes. The first strategy, called TN, outperforms the existing table-based strategy with 20–30 % lesser detection time, 20–25 % higher malicious node detection and negligible overhead. The other two strategies, CTN_MI and CTN_RF explore the novel idea that trusted nodes are able to utilize each others’ information/experience using their long range connectivity as and when available. Simulations performed using an enhanced ONE simulator reveals that investing in enabling connectivity among trusted nodes (as in CTN_RF) can have significant performance benefits.     

Iron-Doped,Mullite-Impregnated PVDF Composite: An Alternative Separator for a High Charge Storage Ceramic Capacitor

In this communication, the formation mechanism of the electroactive β phase, morphology and the dielectric activities of increasing doping concentration (0–1.2 M.W % of mullite) of Fe²⁺ ion-doped, mullite-impregnated polyvinylidene fluoride (PVDF) nanocomposite have been investigated. Differential thermal analysis (DTA) confirms the formation of an electroactive β phase, and Fourier transform infrared spectroscopy (FTIR) showed that the β phase increases simultaneously and attains the maximum increment of 2.6 times compared to pristine PVDF. X-ray diffraction (XRD) spectra also agreed well with the β-phase increment behaviour and also confirmed the presence of required mullite phases. Field emission scanning electron microscopy (FESEM) images indicate the strong interaction between the polymer matrix and different concentrations of Fe²⁺ ion-doped mullite particles, resulting in enhanced electroactive β phase formation and large dielectric constant of the nanocomposite films followed by significant low dielectric loss with high ac conductivity compared to pristine PVDF films at room temperature. This doped polymer composite can be used as a high dielectric separator and, using this separator, we have successfully fabricated a high-charge-storage device. This paper also demonstrates that the loading of conductive Fe²⁺ ions within the highly insulating mullite matrix has a critical concentration for the enhancement and nucleation of the electroactive β phase of the PVDF polymer. In this critical concentration, the highest formation of a β network and maximum numbers of homogeneously distributed iron-doped mullite (FeM) particles in PVDF matrix improves the effective interfacial polarization by Maxwell–Wagner–Sillar (MWS) polarization effect which is responsible for the enhancement of dielectric constant and ac conductivity followed by significant tangent loss. So, it can be concluded that the incorporation of Fe²⁺-doped mullite into PVDF matrix is an effective way to fabricate a high dielectric separator of high-charge-storage electronic devices.     

Noncoherent MMSE multiuser receivers and their blind adaptiveimplementations

Three noncoherent minimum mean-squared error (NMSE)-based multiuser receivers are proposed for multipulse modulation. These receivers have a common MMSE prefilter and are followed by one of three phase-independent decision rules. The simplest decision rule selects the maximum magnitude of the MMSE filter outputs, and the other two account for the second-order statistics of the residual multiple-access interference that remains after MMSE filtering. Blind adaptive algorithms are then proposed for the three noncoherent MMSE receivers. The common adaptive algorithm for the MMSE prefilter, which is based on the stochastic approximation method, is shown to converge in the mean-squared error sense to the nonblind NMSE prefilter. Our convergence analysis yields new insight into the tradeoff between the rate of convergence and the residual mean-squared error. The noncoherent blind receivers obtained here do not require the knowledge of the received signals of any of the interfering users, and are hence well-suited for distributed implementation in cellular wireless networks or in communication systems that must operate in noncooperative environments     

用低反射率光栅阵列实现智能复合电力电缆温度监测

针对现有的电缆温度监测方法主要存在无法检测电缆内部温度和测温时易受到应力影响等缺点。针对此本文研究采用低反射率光栅(wFBG)阵列智能复合电力电缆温度监测技术,用于实时监测电缆内部及外部的温度分布情况。通过免应力光栅阵列,解决了复合电缆和光缆的过程中因光纤受力而影响光栅波长准确测量从而造成对温度的影响问题。系统通过检测wFBG波长漂移得到温度信息从而实现高灵敏度高空间分辨率的智能电缆的分布式温度在线监测。搭建了基于wFBG阵列的复合电力电缆实验系统,结果表明,该系统可以实现对电缆内部及外部温度的高精度、高空间分辨率分布式测量,电缆沿线空间分辨率达到10 cm,测温精度达到0.1℃。该低反射率光栅阵列智能复合电力电缆温度监测系统可以满足智能电网运行的实际需要。