An Objective Illustration of the Inadequacy of the Official EC “Ewers” Method for the Determination of Starch

The Ewers method for starch determination is currently the Official EEC method for measurement of starch purity. In this communication we demonstrate that the use of trifluroacetic acid for solubilisation of starch prior to polarimetric measurements is preferred over the use of mineral acids since the degree of hydrolytic degradation observed with this reagent was minimal compared to mineral acids, thereby giving improved starch purity values. Of particular concern we demonstrate that the Ewers method is non-specific in that the addition of an epichlorohydrin cross-linked dextran as an adulterant enhances the value of starch purity obtained. The Ewers method however was able to detect agarose and carboxymethyl cellulose added to starch as adulterants. It is concluded that the Ewers method is not an acceptably satisfactory method for starch purity measurement on which to base quality control or eligibility for rebate and refund schemes.     

Iron,Neuroinflammation and Neurodegeneration

Disturbance of the brain homeostasis, either directly via the formation of abnormal proteins or cerebral hypo-perfusion, or indirectly via peripheral inflammation, will activate microglia to synthesise a variety of pro-inflammatory agents which may lead to inflammation and cell death. The pro-inflammatory cytokines will induce changes in the iron proteins responsible for maintaining iron homeostasis, such that increased amounts of iron will be deposited in cells in the brain. The generation of reactive oxygen and nitrogen species, which is directly involved in the inflammatory process, can significantly affect iron metabolism via their interaction with iron-regulatory proteins (IRPs). This underlies the importance of ensuring that iron is maintained in a form that can be kept under control; hence, the elegant mechanisms which have become increasingly well understood for regulating iron homeostasis. Therapeutic approaches to minimise the toxicity of iron include N-acetyl cysteine, non-steroidal anti-inflammatory compounds and iron chelation.     

Activity Sensors for Use in Psychiatric Evaluation

The need for objective methods of patient evaluation has long been recognized in clinical psychiatry. While the relationship between mood states and motor activity has been observed for many years, this relationship was never accurately defined due to the imprecise nature of the available observational techniques. This report describes two activity sensors and their related systems which objectively measure motor activity levels and patterns without affecting the patient's movements.     

Experimental Investigation and Thermodynamic Description of the Cu-Zr System

The Cu-Zr binary system is re-investigated via experiment and thermodynamic modeling. Four alloys were prepared by arc melting in order to check the controversial phase equilibria reported in the literature. Both as-cast and annealed alloys were examined by optical microscopy, x-ray diffraction and electron probe microanalysis, and the phase transformation temperatures were measured by differential scanning calorimetry. The intermetallic compounds, Cu₂₄Zr₁₃, Cu₂Zr and Cu₅Zr₈, were demonstrated to be not the stable phases. Based on the literature information and present experimental data, the Cu-Zr system was critically evaluated by means of CALculation of PHAse Diagram approach. A set of self-consistent thermodynamic parameters was obtained, and the calculated phase diagram and thermodynamic properties are in a satisfactory agreement with the experimental data.     

High-Throughput Determination of Interdiffusion Coefficients for Co-Cr-Fe-Mn-Ni High-Entropy Alloys

In this report, a combination of the diffusion multiple technique and the recently developed pragmatic numerical inverse method was employed for a high-throughput determination of interdiffusivity matrices in Co-Cr-FeMn-Ni high-entropy alloys (HEAs). Firstly, one face-centered cubic (fcc) quinary Co-Cr-Fe-Mn-Ni diffusion multiple at 1373 K was carefully prepared by means of the hot-pressing technique. Based on the composition profiles measured by the field emission electron probe micro analysis (FE-EPMA), the composition-dependent interdiffusivity matrices in quinary Co-Cr-Fe-Mn-Ni system at 1373 K were then efficiently determined using the pragmatic numerical inverse method. The determined interdiffusivities show good agreement with the limited results available in the literature. Moreover, the further comparison with the interdiffusivities in the lower-order systems indicates the sluggish diffusion effect in Co-Cr-Fe-Mn-Ni HEAs, which is however not observed in tracer diffusivities. In order for the convenience in further analysis, a generalized transformation relation among interdiffusivities with different dependent components in multicomponent systems was finally derived.     

Weldability and microstructural variations in weldments of Ti-5Ta-1.8Nb alloy

The successful replacement of the present generation of corrosion-resistant materials (nitric acid-grade stainless steel and Ti) by Ti-5Ta-1.8Nb, which has better corrosion resistance, depends on its weldability characteristics. This article presents the results of a study on the fabrication, qualification, and microstructural characterization of the welds. Welding was carried out using the direct current electrode negative (DCEN) polarity tungsten inert gas (TIG) (manual) welding method with high-purity Ar shielding. Testing was carried out as per the ASME standard (section IX, welding and brazing). Qualification tests found that the weldment met the required properties. The weldment showed heterogeneous microstructures, which are rationalized based on differences in phase transformation mechanisms that are dictated by the thermal cycles experienced by various microscopic regions. The results, described in this article, confirm that the weldability of the developmental Ti-Ta-Nb alloy is excellent. A preliminary evaluation of the corrosion behavior of the welds showed rates comparable to that of the base metal, establishing that this alloy could be considered as an alternative material for use in highly corrosive environments.