Hyper-Spherical Search (HSS) algorithm: a novel meta-heuristic algorithm to optimize nonlinear functions

This paper proposes a novel optimization algorithm called Hyper-Spherical Search (HSS) algorithm. Like other evolutionary algorithms, the proposed algorithm starts with an initial population. Population individuals are of two types: particles and hyper-sphere centers that all together form particle sets. Searching the hyper-sphere inner space made by the hyper-sphere center and its particle is the basis of the proposed evolutionary algorithm. The HSS algorithm hopefully converges to a state at which there exists only one hyper-sphere center, and its particles are at the same position and have the same cost function value as the hyper-sphere center. Applying the proposed algorithm to some benchmark cost functions shows its ability in dealing with different types of optimization problems. The proposed method is compared with the genetic algorithm (GA), particle swarm optimization (PSO) and harmony search algorithm (HSA). The results show that the HSS algorithm has faster convergence and results in better solutions than GA, PSO and HSA.     

Studies in dyeing. II. Effect of crystal modification of disperse dyes on polyester dyeing at 130°C

Four commercial disperse dyes were purified and their different crystal forms were prepared by crystallizing from different solvents or precipitating from their solutions in glacial acetic acid by dilution with water. These forms were found to have different melting points. They were dyed on polyester fibers at 130°C to fiber saturation values by changing the dyebath every 15 min. The effect of pretreatment of the dyes in an aqueous environment at different temperatures (60°, 100°, and 130°C) for 15–60 min in the presence and absence of a dispersing agent on the dye uptake values was also studied. Such treatments are shown to reduce the dye uptake. The implication of these treatments in practical dyeing are pointed out.     

Effect of composition of metallurgical powder on the slopes and hearths of electric arc furnaces

Summary To reduce the sliding of fettling powders from the slopes of electric furnaces, it is desirable to use powders with not more than 10% of the fraction finer than 0.088 mm, and the SiO₂ content should be about 4.5–6%. Addition to the magnesite powder of coarse dolomite fraction 15-0.5 mm, and also 6–7% coal tar pitch, reduces the mobility of the powders.The rational composition of metallurgical powders used for fettling slopes and hearths of electric arc furnaces largely depends on the grade of steel being melted.The increase in the life of the slopes and hearths of an electric furnace in which stainless steel was being melted, fettled with MPMZ powder, was due to the increase in the content of periclase bonded with melilite and mervinite in the slopes and melilite and forsterite in the hearths.During the melting of steel of changing sorts, the increase in the life of the slopes and hearths, fettling with magnesite-dolomite powders is due to the presence of crystals of periclase bonded mainly with highly refractory dicalcium silicate.When fettling is done with MPMZ powder the structure of the slopes and hearths is identical. The use of chromemagnesite, magnesite-chromite and magnesite-dolomite powders give rise to the formation of a heterogeneous structure in the slopes and hearths which leads to their irregular wearing away.To prolong the service of the hearths and slopes of electric furnaces it is necessary to continue investigating the wear resistance of fettling materials in furnaces of different capacities, where steels of different types are being melted, typifying the life of the powders by the consumption per ton of steel melted, the burn-out profile of the lining, the interrepair periods and other factors.     

Strength Degradation of Thermally Tempered Glass Plates

An earlier theory of contact-induced strength degradation of brittle materials is extended to include plates in residual surface compression. The scale of the strength-controlling flaw is predicted by indentation fracture mechanics, with the modifying effect of the residual field incorporated into both indentation and strength equations. Experimental verification of the predictions is obtained from diamond-pyramid indentation tests on thermally tempered glass plates. As with untempered plates, the theory accounts for the load dependence of the strength loss; it also explains the insensitivity of the degradation characteristics to initial flaw distribution and identifies toughness as the controlling material parameter. Most significant, however, is the demonstration that surface strengthening can produce dramatic improvements in degradation resistance. The possibility of obtaining all parameters necessary for a complete degradation analysis of a given tempered inaterial entirely by routine indentation/strength testing is discussed.     

Hydrolytic degradation of ionically cross-linked polyphosphazene microspheres

The hydrolytic degradation of gel microspheres based on calcium cross-linked phosphazene polyelectrolytes, poly[di(carboxylatophenoxy)phosphazene] (PCPP) and poly[(carboxylatophenoxy) (glycinato)phosphazene] (PCGPP), was investigated. These microspheres are of importance as carriers in protein and cell encapsulation. Both PCPP and PCGPP ionotropic polyphosphazene hydrogels are degradable in an aqueous environment (pH 7.4, 37°C). The degradation rates can be increased by incorporation of hydrolysis sensitive glycinato groups as the pendant structures in the polymer (PCGPP). Hydrolysis of these polymer hydrogels led to low molecular weight (<1,000 Da) products. The erosion and molecular weight profiles varied also according to the molecular weight of the polyphosphazene constituting the gel beads. Another approach to affect the degradation rates consists of coating microspheres with poly-L -lysine. Ionotropic polyphosphazene hydrogels have potential as biodegradable devices for controlled drug delivery systems. © 1994 John Wiley & Sons, Inc.     

Modeling of Filtration Combustion of Carbon

The kinetics of the overall reactions of carbon gasification at temperatures up to 1600 K is studied. The kinetic characteristics of the reactions are taken into account in a distributed mathematical model of filtration combustion of carbon. By computational experiment at different values of process control parameters (the gas flow rate, the fraction of the oxidant in the gas, and the mass ratio of carbon to the inert material in the combustible mixture), it is found that, in the wave of filtration combustion of carbon under superadiabatic conditions, carbon gasification can predominately yield either CO₂ or CO.