Linear demosaicing inspired by the human visual system.

There is an analogy between single-chip color cameras and the human visual system in that these two systems acquire only one limited wavelength sensitivity band per spatial location. We have exploited this analogy, defining a model that characterizes a one-color per spatial position image as a coding into luminance and chrominance of the corresponding three colors per spatial position image. Luminance is defined with full spatial resolution while chrominance contains subsampled opponent colors. Moreover, luminance and chrominance follow a particular arrangement in the Fourier domain, allowing for demosaicing by spatial frequency filtering. This model shows that visual artifacts after demosaicing are due to aliasing between luminance and chrominance and could be solved using a preprocessing filter. This approach also gives new insights for the representation of single-color per spatial location images and enables formal and controllable procedures to design demosaicing algorithms that perform well compared to concurrent approaches, as demonstrated by experiments.     

Multi-functional biochip for medical diagnostics and pathogen detection

We describe a multi-functional biochip (MFB), which uses two different types of bioreceptors, including nucleic acid and antibody probes, on a single platform. The multi-functional capability of the MFB device for biomedical diagnostics is illustrated by measurements of DNA probes specific to gene fragments of Bacillus anthracis and antibody probes targeted to Escherichia coli. Calibration curves for monitoring pathogenic species using antibody probes against E. coli and DNA probes for B. anthracis illustrate the capability of the device for medical diagnostics and for quantitative detection of pathogenic agents.     

Conditionals and conditional probability.

The authors report 3 experiments in which participants were invited to judge the probability of statements of the form if p then q given frequency information about the cases pq, p?q, ?pq, and ?p?q (where ? = not). Three hypotheses were compared: (a) that people equate the probability with that of the material conditional, 1 - P(p?q); (b) that people assign the conditional probability, P(q/p); and (c) that people assign the conjunctive probability P(pq). The experimental evidence allowed rejection of the 1st hypothesis but provided some support for the 2nd and 3rd hypotheses. Individual difference analyses showed that half of the participants used conditional probability and that most of the remaining participants used conjunctive probability as the basis of their judgments. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

海底天然气管道投产案例分析

为防止形成天然气水合物，天然气管道在投产前必须彻底干燥。海底管道距离长，不能分段施工，多采用清管器组加干燥剂的作业方案，这就存在清管器组的运行控制、卡球和窜漏等问题，作业难度高、风险大。针对我国海底输气管道投产前干燥施工过程中出现的憋压、卡球、窜漏和清管器磨损等问题进行了分析，说明了发生问题的原因。对比研究了不同管道干燥方案的优缺点、清管器使用的合理性、干燥剂使用效果和干燥指标的制定与监测方法等问题。在此基础上， 提出了针对海底天然气管道的凝胶、干燥剂和多盘清管器的组合干燥方案。该方案能有效解决密封、卡球和凝胶滞留等问题，并能确保施工质量，对类似工程有借鉴意义。     

Semiempirical,squeeze flow,and intermolecular diffusion model. II. Model verification using laser microwelding

This article reviews the application of a coupled squeeze flow and intermolecular diffusion model, which was used to predict the quality and size of microwelds in plastics. Weld widths predictions were compared with previously presented experimental results using moving heat source models and temperature fields. The motivation for this work was to develop and verify a model based on fundamental principles that could accurately predict weld size and strength for conventional plastic welding techniques as well as novel techniques such as laser microwelding. It is envisioned that the resulting model could be used to predict proper welding parameters, including laser power and travel speed, to produce welds of varying size. Although insight into weld quality can be derived from this model, it was not the goal of this work to accurately predict weld strength for laser microwelding because of the difficulty in measuring weld strength on the micron scale. However, as reported in Part 1, weld strength for impulse welds were accurately predicted. In this model it was found that variable temperature histories, rather than a single value of maximum weld temperature, allows more accurate modeling of the welding process. In this work (Part 2), microwelds as small as 11 μm in width were produced with transmission infrared welding. In addition, welds over 150‐μm wide were also generated and the model was able to predict the range of weld widths that were found experimentally. It was found that the predictions were in very good agreement with the experimental results. There was some deviation between the experimental data and the model at the extreme parameters and it is believed that this was due to the temperature‐dependent material properties as well as optical aberrations. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers     

Comment on “Nonlinear optimal tracking control with application to super-tankers for autopilot design” by T. Çimen and S.P. Banks

A recent paper by Çimen and Banks [2004. Nonlinear optimal tracking control with application to super-tankers for autopilot design. Automatica, 40(11), 1845–1863] on optimal control system design for oil tanker propulsion and heading highlighted the importance of accurately representing the dynamics of such a vessel. Results presented in that paper are based on a simulation model that provides unrealistic results for an oil tanker of the size considered. Therefore, the results obtained from the simulated ship control problem are not representative of the physical system being considered. In this communication an alternative, more realistic model is presented and discussed with reference to the original publications that define the ship model dynamics.     

Engaging the aging workforce: The relationship between perceived age similarity, satisfaction with coworkers, and employee engagement.

Business publications and the popular press have stressed the importance of creating conditions for meaningful employee expression in work roles, also known as engagement. Few empirical studies, however, have examined how individual or situational factors relate to engagement. Consequently, this study examines the interplay between employee age, perceived coworker age composition, and satisfaction with older (older than 55) and younger (younger than 40) coworkers on engagement using a sample of 901 individuals employed in the United Kingdom. Results indicated that satisfaction with one's coworkers related significantly to engagement. Moreover, perceived age similarity was associated with higher levels of engagement among older workers when they were highly satisfied with their coworkers over 55 and lower levels of engagement when they were not. (PsycINFO Database Record (c) 2010 APA, all rights reserved)