Corrosion inhibition in magnesium-aluminium-based alloys induced by rapid solidification processing

The effect of rapid solidification on the corrosion behaviour in aerated 0.001 M NaCl solution of Mg-Al alloys containing 9.6 to 23.4wt% AI has been investigated in comparison with chill-cast material. Polarization studies show that rapid solidification decreases corrosion current by up to two orders of magnitude corresponding to a corrosion rate of 6 to 11 mil y^–1. Increasing the aluminium content in solid solution by rapid solidification gave rise to a steep increase in pitting potential between 10 and 23 wt% Al and resulted in development of an anodic plateau at 30Acm^–2 attributable to magnesium depletion for the alloy surface and formation of a protective film. Chemical analysis of the electrolyte as a function of dissolution time for the rapidly solidified material indicated that initially only magnesium dissolved and that this dissolution of magnesium ceased within 2 to 5 min. The results indicate the formation of an aluminium-enriched interdiffusion zone at the surface underlying a more stable surface oxide than for ingot-processed Mg-Al-based alloys.     

Surface analytical study of the interaction between γ-amino propyl triethoxysilane and E-glass surface

Time-of-flight secondary ion mass spectrometry has been used to study the interaction of -amino propyl triethoxysilane with an E-glass surface. The fragmentation pattern has been interpreted by assigning a series of mass peaks to the structural unit of the poly(aminosiloxane). The composition of the coating is complicated by the presence of polydimethylsiloxane and its copolymers. The highest mass fragment was obtained from the coating exposed by extraction with warm water (697 AMU). The largest molecular fragments would appear to have degrees of polymerization of 6 with differing numbers of silanol groups. On re-extraction with hot water the fragment size decreased. It is postulated that the network chain length of the three-dimensional polymer decreased as the interface was approached. At the glass surface a chemically bound molecular layer could be identified. The full chemical nature of the deposit is complicated by the incorporation of aluminium from the substrate into the coating. It was also possible to confirm that a layer of warm-water soluble oligomers existed at the air interface.     

Optimal control and energy storage for DC electric train systems using evolutionary algorithms

Railway Engineering Science - Electrified railways are becoming a popular transport medium and these consume a large amount of electrical energy. Environmental concerns demand reduction in energy...     

An Active Feedback System for Stabilizing Visual Images

In normal vision, eye movements cause the image to move on the retina. Special apparatus can stabilize the image on the retina so it cannot move, and vision fades away. Previous methods for stabilizing the image were either optical systems or complex computer-controlled feedback systems. A simpler feedback system is presented which detects eye motion and rotates a mirror through which the target is viewed, to exactly compensate for eye motion. Unlike previous optical systems, this new system has no lenses in either the viewing or the image-forming path to limit the spatial resolution.     

Calculated effect of pulsed pheromone release on range of attraction

In order to assess the possible function of pulsed release of windborne pheromones, calculations were performed to predict the concentration pattern downwind of the source. Two patterns of pulsed releases (sinusoidal and instantaneous) were compared to a constant release pattern. In all three cases, the average rate of release was the same. Assuming the receiving animal needs only a momentary exposure to concentrations above threshold to respond, it is clear that sinusoidal release has a greater distance of detection than constant release and that instantaneous release is even better. The relative magnitude of the increase in range of detection depends on the ratio of average release rate to threshold concentration. Pulsed releases have a greater advantage when the threshold is high and the range of attraction is inherently short. Under these conditions, sinusoidal release can double the range of attraction and instantaneous release can increase it 10-fold. In contrast, with a low threshold and consequent long range of attraction, the pulsed patterns are lost and the increase in range is insignificant. Several testable predictions are derived from the hypothesis that the primary function of pulsed release is to extend the range and time over which a given quantity of pheromone can act.     

A Multi-Channel Pulse-Coded Multiplexing and Demodulating Telemetry System

A multiplexing, demodulating, and recording telemetry system designed to process multiple pulse-coded temperature channels is described. The system provides complete control of recording and multiplexing sequences and timing, and gives a single analog signal in response to each sample of pulse-coded data. It identifies all channels and indicates to a computer when a new data sample is to be processed. The system is self-calibrating to maintain accuracy over extended data collection periods, and is inexpensive.     

Effect of Inhomogeneities on the Apparent Location and Magnitude of a Cardiac Current Dipole Source

A mathematical model was used to investigate the effects of electrical inhomogeneities introduced by the intracavitary blood mass and the lungs on the apparent location and magnitude of a current dipole source representing local activity in the myocardium. Radial and tangential current source moments were considered, and lung conductivity was taken as a variable parameter. Both the blood mass and the lungs cause a current source to appear closer to the heart center than it actually is. The effect increases as the source moves away from the endocardial surface, and maximum displacement is estimated to be of the order of 1 cm. The net effect of the inhomogeneities is to increase the magnitude of the radial component of a source dipole while diminishing its tangential component. These effects depend on source location.     

INVESTIGATION OF THE USE OF LASER-DOPPLER VELOCIMETRY IN TWO-PHASE BUBBLY FLOWS

Understanding the dynamic phenomena of viability loss of shear sensitive cells and bubble breakage and coalescence within airlift reactors requires knowledge of local, liquid-phase hydrodynamics. The laser-Doppler velocimeter (LDV) is a non-invasive instrument which may be used to obtain this information. Experimental procedures and software were developed to detect and measure Doppler bursts in two-phase flow in a split-cylinder airlift reactor. Off-line analysis of the data indicated a detection rate approximately one order of magnitude greater than that observed using an available commercial frequency tracker. Approximately 400 to 500 observations are needed for the ensemble mean to characterize the local mean velocity to within ±5% for a superficial gas velocity of 10.4 cm/s, the highest superficial gas velocity used in these studies. The limitations, prospects, and signal-processing options for LDV in this application are also discussed     

Combinatorial materials research applied to the development of new surface coatings: II. Process capability analysis of the coating formulation workflow

A combinatorial process has been developed for the high throughput production and evaluation of surface coatings. The workflow designed for the production of arrays of liquid coatings involves the robotic transfer of aliquots of solutions of raw materials to an array of glass vials and mixing of the coatings using an unconventional magnetic stirring process. An investigation of the capability of the workflow to accurately and repeatedly prepare coating arrays was conducted as a function of solution viscosity and aliquot size. In addition, mixing capability was evaluated as a function of solution viscosity, total solution volume, and mechanism of stirring. Overall, the results of the study indicated that adequate accuracy and repeatability of the coating preparation process can be achieved as long as raw material solutions are designed such that viscosity is below about 250 cP and aliquot sizes are above about 75 μl. With regard to mixing capability, total solution volume was found to have a profound affect as did the stirring mechanism.     

Numerical Analysis of the Constrained Blister Test

The constrained blister test is investigated through finite element analysis to determine the applicabilities and the limitations of the new technique. Numerical results confirm that the strain energy release rate asymptotically approaches a constant value. These results also show that the test technique and the approximate solution for strain energy release rate are applicable for some practical cases.