Extraction and characterization of soluble protein fractions from Phaseolus lunatus L seeds

Legume proteins as a potential source of valuable nutrients, are the object of several studies in order to obtain the best use. A basic knowledge becomes more important for those proteins from species not wholly utilized, before using them as food ingredients. The objective of this work was to determine several structural and nutritional characteristics of the protein fractions from Phaseolus lunatus, separated in different solvents. The relative amount of extraction for the albumins (ALB), globulins (GLB), prolamines (PRL), and glutelins (GLT) was 62.3, 34.8, 1.4 and 1.5%, respectively. The SDS-PAGE electrophoretic profile of both ALB and GLB, showed seven common bands in intervals from 10 to 95 kDa, and 14 to 99 kDa, respectively; the amino acids profile showed that PRL was the rich fraction in sulfurated amino acids (11.5 g/100 g protein); the content of lysine in the fraction of ALB was smaller than expected but the requirement of the FAO in the fractions of GLB and GLT was covered. In general, the fraction of GLB had the best balance of amino acids and digestibility (80%); however, it had a relationship of calculated protein efficiency ratio (C-PER) of 0.11, smaller than the ratio in ALB (0.97). The calorimetric analysis showed denatured temperatures around 90 degrees C for the ALB, GLB, and GLU fractions. The PRL fraction probably did not present a thermal transition because the proteins were denaturalized by the extraction conditions.     

Disruption of ergosterol biosynthesis,growth, and the morphological transition in <Emphasis Type="Italic">Candida albicans</Emphasis> by sterol methyltransferase inhibitors containing sulfur at C-25 in the sterol side chain

The sterol substrate analog 25-thialanosterol and its corresponding sulfonium salt were evaluated for their ability to serve as antifungal agents and to inhibit sterol methyltransferase (SMT) activity in Candida albicans. Both compounds inhibited cell proliferation, were fungistatic, interrupted the yeastlike-form to germ-tube-form transition, and resulted in the accumulation of zymosterol and related Δ²⁴-sterols concurrent with a decrease in ergosterol, as was expected for the specific inhibition of SMT activity. Feedback on sterol synthesis was evidenced by elevated levels of cellular sterols in treated vs. control cultures. However, neither farnesol nor squalene accumulated in significant amounts in treated cultures, suggesting that carbon flux is channeled from the isoprenoid pathway to the sterol pathway with minor interruption or redirection until blockage at the C-methylation step. Activity assays using solubilized C. albicans SMT confirmed the inhibitors impair SMT action. Kinetic analysis indicated that 25-thialanosterol inhibited SMT with the properties of a time-dependent mechanismbased inactivator K _i of 5 =gmM and apparent k _inact of 0.013 min⁻¹, whereas the corresponding sulfonium salt was a reversible-type transition state analog exhibiting a K _i of 20 nM. The results are interpreted to imply changes in ergosterol homeostasis as influenced by SMT activity can control growth and the morphological transition in C. albicans, possibly affecting disease development.     

Thermochemical model on the carbothermal reduction of oxides during spark plasma sintering of zirconium diboride

Carbon was used to reduce oxides in spark plasma sintered ZrB₂ ultra-high temperature ceramics. A thermodynamic model was used to evaluate the reducing reactions to remove B₂O₃ and ZrO₂ from the powder. Powder oxygen content was measured and carbon additions of 0.5 and 0.75 wt% were used. A C–ZrO₂ pseudo binary diagram, ZrO₂–B₂O₃–C pseudo ternaries, and Zr–C–O potential phase diagrams were generated to show how the reactions can be related to an open system experiment in the tube furnace. Scanning transmission electron microscopy identified impurity phases composed of amorphous Zr–B–O with lamellar BN and a Zr–C–O ternary model was calculated under SPS sintering conditions at 1900°C and 6 Pa to understand how oxides can be retained in the microstructure.     

α-Alumina and spinel react into single-phase high-alumina spinel in <3 seconds during flash sintering

In situ X-ray diffraction measurements at the Advanced Photon Source show that α-Al₂O₃ and MgAl₂O₄ react nearly instantaneously and completely, and nearly completely to form single-phase high-alumina spinel during voltage-to-current type of flash sintering experiments. The initial sample was constituted from powders of α-Al₂O₃, MgAl₂O₄ spinel, and cubic 8 mol% Y₂O₃-stabilized ZrO₂ (8YSZ) mixed in equal volume fractions, the spinel to alumina molar ratio being 1:1.5. Specimen temperature was measured by thermal expansion of the platinum standard. These measurements correlated well with a black-body radiation model, using appropriate values for the emissivity of the constituents. Temperatures of 1600-1736°C were reached during the flash, which promoted the formation of alumina-rich spinel. In a second set of experiments, the flash was induced in a current-rate method where the current flowing through the specimen is controlled and increased at a constant rate. In these experiments, we observed the formation of two different compositions of spinel, MgO•3Al₂O₃ and MgO•1.5Al₂O₃, which evolved into a single composition of MgO•2.5Al₂O₃ as the current continued to increase. In summary, flash sintering is an expedient way to create single-phase, alumina-rich spinel.     

Tannic acid coating and in situ deposition of silver nanoparticles to improve the antifouling properties of an ultrafiltration membrane

The construction of antifouling membranes has been a desirable approach for addressing membrane-fouling issues in the ultrafiltration (UF) process. Antifouling means antiadhesive and antimicrobial; however, few researchers have achieved both properties in a facile and effective manner. In this article, we report a direct tannic acid (TA) coating method combined with the in situ deposition of silver nanoparticles (Ag NPs); this was used to improve the antifouling properties of a positively charged polymeric UF membrane. The results show that the TA–Ag NP modified membranes showed improved protein resistance (flux recovery rate = 71.2% after modification vs 17.8% before modification) and less attachment of bacteria (Escherichia coli K1) on the membrane surface and reduced cell viability in the resulting bacterial suspension (reduced by ≥90%) because of the combined antimicrobial properties of both the TA and Ag NPs. This indicated that our modification method was promising for UF membrane antifouling applications. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47314.     

Deliqueszenz und Effloreszenz hygroskopischer Salzpartikeln in Partikel‐Wand‐ und Partikel‐Partikel‐Kontakten

In case of dust separation with surface filters, adhesive bonds at particle‐wall and particle‐particle contacts are of great importance. The deliquescence and efflorescence of hygroscopic salt particles can significantly influence the adhesive bonds at particle contacts with such salt particles. Therefore, to investigate these phenomena, various types of particle contacts were produced by the separation of aerosols on filtering collectors and subsequently observed in the chamber of an environmental SEM during the moisture‐induced deliquescence and efflorescence.     

Analysis of the fluorescence of mechanically processed defect-laden hexagonal boron nitride and the role of oxygen in catalyst deactivation

ABSTRACT

The use of hexagonal boron nitride (h-BN) as a non-metal heterogeneous catalyst has been a popular subject in research since the discovery of its catalytic properties in 2016. Previous work found that an activation step was necessary for producing an effective catalyst. Density functional theory (DFT) calculations indicate defect sites, such as nitrogen (V_N) and boron (V_B) vacancies, bind favourably to olefins, hydrogen, and oxygen. In particular, the visible fluorescence intensity of processed h-BN increased with the length of exposure to air. The fluorescence behaviour of dh-BN powders when exposed to air after exposure to species such as argon, propene, and carbon dioxide is presented. Density of state calculations for molecular and atomic oxygen bound to V_N and V_B show that this increase in fluorescence may be due to atomic oxygen binding to V_N. The fluorescence emission behaviour observed in dh-BN powders and its relationship to DOS of oxygen species bound to catalytically active defect sites provides a better understanding of potential deactivation modes for catalysts based on dh-BN.     

Carbon nanowalls deposited by inductively coupled plasma enhanced chemical vapor deposition using aluminum acetylacetonate as precursor

Well aligned carbon nanowalls, a few nanometers thick, were fabricated by continuous flow of aluminum acetylacetonate (Al(acac)₃) without a catalyst, and independent of substrate material. The nanowalls were grown on Si, and steel substrates using inductively coupled plasma-enhanced chemical vapor deposition. Deposition parameters like flow of argon gas and substrate temperature were correlated with the growth of carbon nanowalls. For a high flow of argon carrier gas, an increased amount of aluminum in the film and a reduced lateral size of the carbon walls were found. The aluminum is present inside the carbon nanowall matrix in the form of well crystallized nanosized Al₄C₃ precipitates.     

Effect of dehydroxylation on the specific heat of simple clay mixtures

Specific heats of four clays (standard reference kaolins, commercial kaolin and montmorillonite) before and after dehydroxylation have been measured. The results were compared with handbook data for the thermal chemical properties of solids. Good agreement has been obtained for the reference kaolin before any thermal treatment. Then, following thermal treatments at 500 °C, 600 °C and 700 °C, dehydroxylation leads to a progressive decrease of heat capacity per unit mass. After dehydroxylation, heat capacity values for all the studied materials are rather similar and agree closely with those estimated by the rule of mixtures. Finally, an empirical relation describing the specific heat capacity (C) in J kg⁻¹ K⁻¹ of dehydroxylated kaolin from 40 °C to 1100 °C is proposed: C = 1128 + 0.102T − 36 × 10⁶T⁻² where T is in K.