Relationship between the antioxidant properties and the phenolic and flavonoid content in traditional balsamic vinegar

The antioxidant properties of traditional balsamic vinegar as regards its phenolic and flavonoid content comparing it to selected vinegars and red wines have been investigated. The polyphenols were separated from interfering compounds utilizing C18 columns. The polyphenolic content was determined utilizing both Folin–Ciocalteu and peroxidase assays. The antioxidant capacity was quantified using both ABTS and FRAP assays. The results show that traditional balsamic vinegar has lower antioxidant activity and phenolic and flavonoid content than Nero d’Avola but higher than the other tested products. The antioxidant capacity of wines and vinegars is highly correlated with their phenolic content, measured by peroxidase assay and it is also highly correlated with their flavonoid content while in traditional balsamic vinegar and balsamic vinegar this correlation diminishes. The study describes a simple and fast method of separating from other compounds and of measuring polyphenols in the analysis of red wines and vinegars with complex composition such as traditional balsamic vinegar.     

The Fight against the Influenza A Virus H1N1: Synthesis,Molecular Modeling,and Biological Evaluation of Benzofurazan Derivatives as Viral RNA Polymerase Inhibitors

The influenza RNA polymerase complex, which consists of the three subunits PA, PB1, and PB2, is a promising target for the development of new antiviral drugs. A large library of benzofurazan compounds was synthesized and assayed against influenza virus A/WSN/33 (H1N1). Most of the new derivatives were found to act by inhibiting the viral RNA polymerase complex through disruption of the complex formed between subunits PA and PB1. Docking studies were also performed to elucidate the binding mode of benzofurazans within the PB1 binding site in PA and to identify amino acids involved in their mechanism of action. The predicted binding pose is fully consistent with the biological data and lays the foundation for the rational development of more effective PA–PB1 inhibitors.     

A design methodology for high-order class-D audio amplifiers

This paper presents a design methodology for high-order class-D amplifiers, based on their similarity with sigma–delta ( $\Upsigma\Updelta$ ) modulators, for which established theory and toolboxes are available. The proposed methodology, which covers the entire design flow, from specifications to component sizing, is validated with three design examples, namely a second-order, a third-order, and a fourth-order class-D amplifier. Moreover, the third-order class-D amplifier has been integrated on silicon and characterized, further confirming the validity of the whole design flow. The achieved results demonstrate that high-order class-D amplifiers can achieve total-harmonic-distortion (THD) performance compatible with the specifications of high-end audio applications (THD  ≈ 90 dB), which would be unfeasible with conventional first-order class-D amplifiers.     

Latent risk and trend models for the evolution of annual fatality numbers in 30 European countries

In this paper a unified methodology is presented for the modelling of the evolution of road safety in 30 European countries. For each country, annual data of the best available exposure indicator and of the number of fatalities were simultaneously analysed with the bivariate latent risk time series model. This model is based on the assumption that the amount of exposure and the number of fatalities are intrinsically related. It captures the dynamic evolution in the fatalities as the product of the dynamic evolution in two latent trends: the trend in the fatality risk and the trend in the exposure to that risk. Before applying the latent risk model to the different countries it was first investigated and tested whether the exposure indicator at hand and the fatalities in each country were in fact related at all. If they were, the latent risk model was applied to that country; if not, a univariate local linear trend model was applied to the fatalities series only, unless the latent risk time series model was found to yield better forecasts than the univariate local linear trend model. In either case, the temporal structure of the unobserved components of the optimal model was established, and structural breaks in the trends related to external events were identified and captured by adding intervention variables to the appropriate components of the model. As a final step, for each country the optimally modelled developments were projected into the future, thus yielding forecasts for the number of fatalities up to and including 2020.     

Rheological characterization of xanthan suspensions of nanoscale iron for injection in porous media

Nanoscale zerovalent iron (NZVI) represents one of the most interesting reagents for the remediation of contaminated aquifers, but its application is hindered by a lack of colloidal stability. Prior studies have shown that nanoscale iron slurries can be successfully stabilized against aggregation and sedimentation through dispersion in xanthan solutions; thus, further research was carried out by focusing on the flow behavior of xanthan-modified NVZI suspensions. This work aims at understanding the rheological properties of NZVI-xanthan suspensions, which have been extensively tested under two different flow conditions: simple shear flow and flow through a porous medium. According to both experimental approaches, the suspensions show a shear thinning behavior that is dependent on iron concentration. These rheological properties are explained by referring to the microstructure of the colloidal system. Flow equations have been formulated and solved in radial coordinates in order to demonstrate the feasibility of such suspensions in field scale applications.     

Migration of Mineral Oil into Noodles from Recycled Fibres in the Paperboard Box and the Corrugated Board Transport Box as well as from Printing Inks: A Case Study

From the toxicological evaluation of mineral oils as used in offset printing inks by the Joint Food and Agriculture Organization of the United Nations/World Health Organization Expert Committee on Food Additives (JECFA), a specific migration limit of 0.6 mg/kg in food can be derived. Experimental packs for taglioline (fine noodles) were investigated, aiming at respecting this limit. This ended with four conclusions. First, during the 65 day test (shelf life of 2 years), the transport box of corrugated board contaminated the bottom packs in the box with 6.1 mg/kg mineral oil saturated hydrocarbons (MOSH) and had the potential of contaminating all the 10 packs on average at about 10 mg/kg. Second, the migration from an improved recycled paperboard (five times less mineral oil than average) still amounted to 4.9 mg/kg, indicating that optimization of recycling is not promising to respect the 0.6 mg/kg limit. Third, a printing ink containing 3 g/kg MOSH (about 100 times less than conventional offset inks) still contaminated the taglioline with 0.6 mg/kg MOSH. Finally, the taglioline were contaminated with 2.5 mg/kg MOSH already before packing, illustrating that there are other sources of mineral oil violating the 0.6 mg/kg limit. Copyright © 2011 John Wiley & Sons, Ltd.     

Numerical Analysis on a Latent Thermal Energy Storage System with Phase Change Materials and Aluminum Foam

Abstract

A latent heat thermal energy storage system with phase change material (PCM) is numerically studied. To enhance the heat transfer inside the system, a highly conductive metal foam is employed with ceramic nanoparticles. The latter method of enhancement leads to a new class of material called Nano-PCM. The system under investigation is a 70-L tank filled up with pure PCM or Nano-PCM and several pipes are situated where the heat transfer fluid (HTF) flows. The pipe surfaces are assumed at constant temperature above the PCM melting temperature to simulate the heat transfer from the HTF. The enthalpy-porosity theory is applied to simulate the PCM phase change, while the porous media formulation is assumed to describe the metal foam behavior. The nano-PCM is modeled with single-phase model where the properties are the weighted-average between the fluid base and the nanoparticles. The simulations are accomplished for charging-discharging process at different porosities and nanoparticle concentration. The results are given in term of average melting fraction evolution, average temperature as function of time, average stored energy. The metal foam significantly improves the heat transfer between PCM and HTF respect to the addition of nanoparticles, reducing the charging and discharging time more than one order of magnitude.     

Photovoltaic Devices: High‐Performance Organic Solar Cells with Spray Coated Hole‐Transport and Active Layers (Adv. Funct. Mater. 1/2011)

In this study, we report high performance organic solar cells with spray coated hole‐transport and active layers. With optimized ink formulations we are able to deposit films with controlled thickness and very low surface roughness (<10 nm). Specifically we deposit smooth and uniform 40 nm thick films of poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) as well as films composed of a mixture of poly(3‐hexyl thiophene) (P3HT) and the C₆₀‐derivative (6,6)‐phenyl C61‐butyric acid methyl ester (PCBM) with thicknesses in the range 200–250 nm. To control film morphology, formation and thickness, the optimized inks incorporate two solvent systems in order to take advantage of surface tension gradients to create Marangoni flows that enhance the coverage of the substrate and reduce the roughness of the film. Notably, we achieve fill factors above 70% and attribute the improvement to an enhanced P3HT crystallization, which upon optimized post‐drying thermal annealing results in a favorable morphology. As a result, we could extend the thickness of the layer to several hundreds of nanometers without noticing a substantial decrease of the transport properties of the layer. By proper understanding of the spreading and drying dynamics of the inks we achieve spray coated devices with power conversion efficiency of 3.75%, with fill factor, short circuit current and open circuit voltage of 70%, 9.8 mA cm^?2 and 550 mV, respectively.