Hybrid finite-element method for discretising cylindrically symmetric parts in electrotechnical models

In many technical devices such as transformers and electrical machines, large differences in geometric dimensions are observed. As a consequence, the generation of a 3D computational grid for the whole device leads to unacceptably large numbers of elements or can even fail. In addition to the commonly applied cartesian or cylindrical symmetries of the overall geometry, the model can be subdivided into parts featuring translational or cylindrical symmetries. Such parts are discretised separately, accounting for the local symmetry, and are then combined with the surrounding 3D model. Excitations and boundary conditions of the submodels are not necessarily symmetric but are expected to be smooth in the direction of the symmetry. Then, the field distribution at the interface is well approximated by a set of spectral elements along the dimension of symmetry. Coupling between the model parts is carried out by means of Lagrange multipliers. A single-phase transformer with thin insulation sheets is taken as an example to illustrate the proposed hybrid discretisation. The cross-section of the cylindrically symmetric part containing thin sheets, is represented by a fine 2D finite-element mesh so that all the geometrical details can be resolved, and the rest of the structure is discretised by a 3D mesh. Nevertheless, a fully 3D field distribution is calculated in all model parts. Only a small number of harmonic functions is needed to account for the azimuthal field variation at the cylindrical interface. Hence, the number of unknowns in the numerical model is reduced significantly, while a high level of accuracy is maintained     

Anion Sensing Porphyrin Functionalized Nanoparticles

Disulfide and dithiocarbamate functionalized porphyrins have been synthesized and used as protecting ligands for gold nanoparticle formation either via ligand substitution reactions or by direct synthesis. These nanoparticles have been shown to recognize anions via changes in the absorbance spectrum of the surface adsorbed porphyrin moieties. Association constants, derived from quantitative titrations, indicate a remarkable surface enhancement effect where the surface bound porphyrins bind anions much more strongly than the free receptor in solution.     

Efficacy and tolerability of brodimoprim in otitis

We managed four cases of lymphorrhea after extraperitoneal pelvic lymphadenectomy by means of minocycline instillation into the cavity around the drainage tube. Two patients had concomitantly undergone cystectomy and one prostatectomy via the extraperitoneal approach. In all four cases, the lymphorrhea markedly subsided, which dramatically shortened the duration of drainage. No side effects occurred. These findings indicate that minocycline instillation is an efficacious treatment for lymphorrhea.     

Practical accuracy analysis of some existing effective channellength and series resistance extraction methods for MOSFET's

A method to analyze the accuracy of the extracted values for the channel length (L_eff) and series resistance (R_s) of MOSFET devices is presented. The analysis is based on a statistical argument being the variance σ of the extracted results. This variance is found to be a good measure for the accuracy of the particular extraction method used. It is shown that, in the case of deep submicron technologies, errors as large as 200 nm for ΔL can be made for these extraction methods depending on the process design and the process control. The use of a single transistor method is suggested as a possible solution to the low accuracy of the L-array methods     

Stability, in-Vitro and in-Vivo Release Studies from Metronidazole Ointments

The influence of ointment formulation on the stability, the in-vitro release and the in-vivo absorption through the skin of rabbits was investigated. The choice of the selected ointments has no influence on the drug stability with the exception of an acidified emulsion base. A good correlation between in-vitro release and in-vivo absorption was found revealing that metronidazole was quickly released and effectively absorbed from a polyethylene glycol base.     

Report of a case of maxillo-nasal dysplasia (Binder syndrome)

The case of a girl with Binder syndrome (maxillonasal-dysplasia) is reported. The girl has a peculiar face due to severely depressed nasal bridge, the nasofrontal angle is absent and the nose is hypoplastic with flattened alae and nasal tip; the upper lip has a convex contour with poorly developed philtrum. The premaxillary is hypoplastic. Lateral and postero-anterior cephalometric findings are presented.     

Preparation of V/ZrO2 catalysts by the sol-gel method: Physical and structural characterization

Some zirconia-supported vanadium oxides have been prepared by sol-gel method and characterized by different techniques. The vanadium content exerts an effect on the area and pore-size of precursors and samples calcined. The presence of vanadium also affects the decomposition of precursors into ZrO₂ and to its phase transformation, as well as the formation of fibres, as shown by SEM-EDX. XPS analyses show the presence of two species of vanadium at the surface, V^5– and V⁴⁺, the percentage of each one depending on the load of vanadium in the catalyst.     

Study on phase behavior–impact strength relationship of unsaturated polyester/polyurethane hybrid polymer network

The phase behavior of a hybrid polymer network (HPN) composed of poly[(propylene glycol maleate)-co-(propylene glycol phthalate)] crosslinked with styrene and polyester–urethane crosslinked with methylene-bis-ortho-chloroaniline was examined. The correlation between phase separation and impact strength of the HPNs is discussed. The composition of HPNs has an effect on their properties.