Optimized unequal error protection of embedded video bitstream using adaptive-hierarchical QAM

In this paper, a reliable video communication system using adaptive Hierarchical QAM (HQAM) is designed to provide optimized unequal error protection (UEP) to embedded video bitstreams. Based on the relative importance of bits, video bitstream is partitioned into two priorities, namely High Priority (HP) and Low Priority (LP) substreams. Then, the optimal value of modulation (or hierarchical) parameter (α) of HQAM, which controls the relative error protection of these substreams, is selected from a pre-designed look-up table. The proposed system adapts itself by adapting the optimal α according to the varying channel condition, without changing the modulation level. This is in contrast to conventional WiMAX and LTE systems, in which dynamic switching among multiple modulations is used to adapt the varying channel conditions. This paper proposes HQAM with adaptive α as an alternative to the multiple modulation schemes. Moreover, for fixed average transmission power, receiver demodulates symbols without the knowledge of α. In order to further improve the video quality and to reduce the effects of erroneously received LP bits, the proposed system uses another level of adaptation, in which received LP bits are adaptively considered or discarded, before decoding the video, depending on the channel conditions (or optimized α). Simulation results show that proposed system can achieve significant improvement in the video quality compared to QAM based EEP scheme and non-adaptive HQAM.     

Using model transformation to refactor use case models based on antipatterns

Use Case modeling is a popular technique for documenting functional requirements of software systems. Refactoring is the process of enhancing the structure of a software artifact without changing its intended behavior. Refactoring, which was first introduced for source code, has been extended for use case models. Antipatterns are low quality solutions to commonly occurring design problems. The presence of antipatterns in a use case model is likely to propagate defects to other software artifacts. Therefore, detection and refactoring of antipatterns in use case models is crucial for ensuring the overall quality of a software system. Model transformation can greatly ease several software development activities including model refactoring. In this paper, a model transformation approach is proposed for improving the quality of use case models. Model transformations which can detect antipattern instances in a given use case model, and refactor them appropriately are defined and implemented. The practicability of the approach is demonstrated by applying it on a case study that pertains to biodiversity database system. The results show that model transformations can efficiently improve quality of use case models by saving time and effort.     

Modeling of microstrip antennas using neural networks techniques: A review

Artificial neural networks modeling have recently acquired enormous importance in microwave community especially in analyzing and synthesizing of microstrip antennas (MSAs) due to their generalization and adaptability features. A trained neural model estimates response very fast, which is nearly equal to its measured and/or simulated counterpart. Thus, it completely bypasses the repetitive use of conventional models as these models need rediscretization for every minor changes in the geometry, which itself is a time‐consuming exercise. The purpose of this article is to review this emerging area comprehensively for both analyzing and synthesizing of the MSAs. During reviewing process, some untouched cases are also observed, which are essentially required to be resolved for antenna designers. Unique and efficient neural networks‐based solutions are suggested for these cases. The proposed neural approaches are validated by fabricating and characterizing of the prototypes too. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:747–757, 2015.     

Wavelet based sub-band parameters for classification of unaspirated Hindi stop consonants in initial position of CV syllables

This paper proposes a new feature extraction technique using wavelet based sub-band parameters (WBSP) for classification of unaspirated Hindi stop consonants. The extracted acoustic parameters show marked deviation from the values reported for English and other languages, Hindi having distinguishing manner based features. Since acoustic parameters are difficult to be extracted automatically for speech recognition. Mel Frequency Cepstral Coefficient (MFCC) based features are usually used. MFCC are based on short time Fourier transform (STFT) which assumes the speech signal to be stationary over a short period. This assumption is specifically violated in case of stop consonants. In WBSP, from acoustic study, the features derived from CV syllables have different weighting factors with the middle segment having the maximum. The wavelet transform has been applied to splitting of signal into 8 sub-bands of different bandwidths and the variation of energy in different sub-bands is also taken into account. WBSP gives improved classification scores. The number of filters used (8) for feature extraction in WBSP is less compared to the number (24) used for MFCC. Its classification performance has been compared with four other techniques using linear classifier. Further, Principal components analysis (PCA) has also been applied to reduce dimensionality.     

Your comments matter: incorporating viewers’ comments for ranking online video content using bibliometrics

ABSTRACT

The quality of user-generated content over World Wide Web media is a matter of serious concern for both creators and users. To measure the quality of content, webometric techniques are commonly used. In recent times, bibliometric techniques have been introduced to good effect for evaluation of the quality of user-generated content, which were originally used for scholarly data. However, the application of bibliometric techniques to evaluate the quality of YouTube content is limited to h-index and g-index considering only views. This paper advocates for and demonstrates the adaptation of existing Bibliometric indices including h-index, g-index and M-index exploiting both views and comments and proposes three indices h_vc, g_vc and m_vc for YouTube video channel ranking. The empirical results prove that the proposed indices using views along with the comments outperform the existing approaches on a real-world dataset of YouTube.     

Femtocell based green power consumption methods for mobile network

This paper presents the analytical models of power consumption in macrocell, microcell, picocell and femtocell based networks. Five case studies are presented in this paper where macrocells, microcells, picocells and femtocells are deployed based on the number of mobile subscribers present in a region, mobile user traffic in that region and the area of the region where cellular coverage has to be provided. A comparative study is performed between the power consumption by the base stations in each of these five cases and that of the only macrocell based network. The simulation results demonstrate that using each of these five strategies the power consumption by the base stations can be minimized than that of only macrocell based network. Based on the power consumption by the base stations in these five schemes, we have categorized the networks into five classes, A, B, C, D and E, each of which contains cells of different types to reduce power consumption to achieve green cellular network.     

Wear and surface analysis of 38 mm ceramic-on-metal total hip replacements under standard and severe wear testing conditions

The purpose of this study was to compare the wear of zirconia-toughened alumina (ZTA) and alumina femoral heads tested against as-cast CoCrMo alloy acetabular cups under both standard and severe wear conditions. A new severe test, which included medio-lateral displacement of the head and rim impact upon relocation, was developed. This resulted in an area of metal transfer and an area of increased wear on the superior-anterior segment of the head that were thought to be due to dislocation and rim impact respectively. While the wear of all ceramic heads was immeasurable using the gravimetric method, the wear rates for the metallic cups from each test were readily calculated. An average steady state wear rate of 0.023 +/- 0.005 mm3/10(6) cycles was found for the cups articulating against ZTA under standard wear conditions. A similar result had previously been obtained for the wear of cups articulated against alumina heads of the same size (within the same laboratory). Under severe wear conditions an increase in the metallic cup steady state wear rate was found with the ZTA and alumina tests giving 0.623 +/- 0.252 and 1.35 +/- 0.154 mm3/10(6) cycles respectively. Wear of the ceramic heads was detected using atomic force microscopy which showed, under severe wear conditions, a decrease in polishing marks and occasional grain removal. The surfaces of the ZTA heads tested under standard conditions were virtually unchanged from the unworn samples. Friction tests showed low friction factors for all components, pre and post wear.     

Roughing filtration as an effective pre-treatment system for high turbidity water

Effective water treatment is the prime goal of every water treatment facility. Chakwal Water Treatment Plant in Pakistan has been treating high-turbidity surface water through crude coagulation, sedimentation and slow sand filtration since the early 1980s. The process has always been tedious in terms of high coagulant dosage, large volumes of sludge and short filter runs especially after wet spells. A laboratory-scale study was conducted to see if roughing filtration, as the pre-treatment process, would help in reducing coagulant dose and sludge volume and improving effluent quality. Results indicated that up-flow rouging filtration with media grades decreasing in the direction of flow could reduce wet weather raw water turbidity (by more than 90%) and coagulant dose. Overall, the plant could save over US $54,000 annually in terms of coagulant cost only. Longer filter runs, improved product water quality leading to lower chlorine dose requirement, would be additional benefits.     

Development of wheel-less snake robot with two distinct gaits and gait transition capability

Snake robots are mostly designed based on single mode locomotion. However, single mode gait most likely could not work effectively when the robot is subject to an unstructured working environment with different measures of terrain complexity. As a solution, mixed mode locomotion is proposed in this paper by synchronizing two types of gaits known as serpentine and wriggler gaits used for non-constricted and narrow space environments, respectively, but for straight line locomotion only. A gait transition algorithm is developed to efficiently change the gait from one to another. This study includes the investigation on kinematics analysis followed by dynamics analysis while considering related structural constraints for both gaits. The approach utilizes the speed of the serpentine gait for open area locomotion and exploits the narrow space access capability of the wriggler gait. Hence, it can increase motion flexibility in view of the fact that the robot is able to change its mode of locomotion according to the working environment.     

Multi-objective optimization in wire-electro-discharge machining of TiC reinforced composite through Neuro-Genetic technique

This paper proposed a Neuro-Genetic technique to optimize the multi-response of wire electro-discharge machining (WEDM) process. The technique was developed through hybridization of a radial basis function network (RBFN) and non-dominated sorting genetic algorithm (NSGA-II). The machining was done on 5 vol% titanium carbide (TiC) reinforced austenitic manganese steel metal matrix composite (MMC). The proposed Neuro-Genetic technique was found to be potential in finding several optimal input machining conditions which can satisfy wide requirements of a process engineer and help in efficient utilization of WEDM in industry.