Fabrication and Circuit Modeling of NMOS Inverter Based on Quantum Dot Gate Field-Effect Transistors

This paper presents the fabrication of a negative-channel metal–oxide–semiconductor (NMOS) inverter based on quantum dot gate field-effect transistors (QDG-FETs). A QDG-FET produces one intermediate state in its transfer characteristic. NMOS inverters based on a QDG-FET produce three states in their transfer characteristic. The generation of the third state in the inverter characteristic makes this a promising circuit element for multivalued logic implementation. A circuit simulation result based on the Berkley simulation (BSIM) circuit model of the QDG-FET is also presented in this paper, predicting the fabricated device characteristic.     

Availability and cost-centered preventive maintenance scheduling of continuous operating series systems using multi-objective genetic algorithm: A case study

This article presents a multi-objective (maximization of availability and minimization of maintenance cost) preventive maintenance (PM) scheduling model for a continuous operating series system (COSS) which do not provide an off-working period for PM. The objective functions are optimized by using a Multi-Objective Genetic Algorithm (MOGA). The effectiveness of the model is demonstrated through a coal-fired boiler-tube. The case study shows that the model can improve the availability along with profound reduction of the maintenance cost, i.e., increases the profit of the plant.     

Topology Management Ensuring Reliability in Delay Sensitive Sensor Networks with Arbitrary Node Failures

The lifetime of a sensor network is influenced by the efficient utilization of the resource constrained sensor nodes. The tree-based data gathering offers good quality of service (QoS) for the running applications. However, data gathering at the sink reduces the network lifetime due to a fast failure of highly loaded nodes. Loss of connectivity and sensing coverage affect the performance of the applications that demand critical QoS. In this paper, a data gathering tree management scheme has been proposed to deal with arbitrary node failures in delay-sensitive sensor networks. A load-balanced distributed BFS tree construction procedure has been introduced for an efficient data gathering. Based on the initial tree construction, a tree maintenance scheme and an application message handler have been designed to ensure the reliable delivery of the application messages. The correctness of the proposed scheme has been verified both theoretically and with the help of simulation. The proposed scheme offers low overhead, enhanced network lifetime and good QoS in terms of delay and reliability of the application messages.     

Potentiality of Indian pineapple leaf fiber for apparels

The use of textile-grade fiber extracted from the Indian pineapple leaf is an unexplored area. Pineapple leaf fiber (PALF) is fine, soft, and moderately strong and is much acceptable for fashion garment. An attempt has been made to extract and soften Indian PALF from the pineapple leaves by decortication and subsequent water retting. Decorticated cum retted fiber has shown better physicomechanical and surface appearance properties than decorticated fiber. Fine yarn (38 tex) was spun in a suitable spinning system, and the property performance was found to be suitable to make eco-sustainable novelty fabric. Fabric was developed by using cotton as warp yarn and PALF-based yarn as weft in a handloom. The developed fabric shows very good physical and mechanical properties, desired for apparels. This inferred that Indian PALF may be successfully used to make eco-niche apparel quality fabric as well as novelty textiles.     

Synthesis and Characterization of Eu3+‐Doped Transparent Glass–ceramics Containing Nanocrystalline SrIINbIVO3

The glass–ceramics containing a rarely achievable nanocrystalline Sr^IINb^IVO₃ phase in the 53.75SiO₂–18.25K₂O–9Bi₂O₃–9SrO–9Nb₂O₅–0.5CeO₂–0.5Eu₂O₃ (mol%) glass system were prepared by the melt‐quench technique followed by a two‐stage controlled heat treatment. The unusual oxidation state of Nb in Sr^IINb^IVO₃ crystal is 4+ and upon heat treatment of the samples at lower temperature of 500°C for several hours, the glass composition and chemical environment around Nb ions played a key role for the formation of Sr^IINb^IVO₃ in the glass–ceramics. The microstructure of the glass–ceramics was studied using TEM and FESEM. The TEM images advocate 10–40 nm crystallite size of Sr^IINb^IVO₃. FTIR study confirms that all the samples consist of SiO₄, BiO₃, BiO₆, and NbO₆ structural units. The refractive index at different wavelengths was found to vary in the range 1.7105–1.7905 and increase with increase in heat‐treatment time. The luminescence spectra of Eu³⁺‐doped glass and glass–ceramics were recorded at 465 nm excitation wavelength and the luminescence intensity is found to be increased with heat‐treatment time due to increase in crystallinity. The high intensity ratio of ⁵D₀→⁷F₂ to ⁵D₀→⁷F₁ indicates that the Eu³⁺‐doped nanocrystalline Sr^IINb^IVO₃ glass–ceramics are promising candidate materials as red‐light source.     

Thermal,Structural, and Enhanced Photoluminescence Properties of Eu3+‐doped Transparent Willemite Glass–Ceramic Nanocomposites

The precursor glass in the ZnO–Al₂O₃–B₂O₃–SiO₂ (ZABS) system doped with Eu₂O₃ was prepared by the melt‐quench technique. The transparent willemite, Zn₂SiO₄ (ZS) glass–ceramic nanocomposites were derived from this precursor glass by a controlled crystallization process. The formation of willemite crystal phase, size, and morphology with increase in heat‐treatment time was examined by X‐ray diffraction (XRD) and field‐emission scanning electron microscopy (FESEM) techniques. The average calculated crystallite size obtained from XRD is found to be in the range 18–70 nm whereas the grain size observed in FESEM is 50–250 nm. The refractive index value is decreased with increase in heat‐treatment time which is caused by the partial replacement of ZnO₄ units of ZS nanocrystals by AlO₄ units due to generation of vacancies. Fourier transform infrared (FTIR) reflection spectroscopy was used to evaluate its structural evolution. Vickers hardness study indicates marked improvement of hardness in the resultant glass‐ceramics compared with its precursor glass. The photoluminescence spectra of Eu³⁺ ions exhibit emission transitions of ⁵D₀→⁷F_j (j = 0, 1, 2, 3, and 4) and its excitation spectra show an intense absorption band at 395 nm. These spectra reveal that the luminescence performance of the glass–ceramic nanocomposites is enhanced up to 17‐fold with the process of heat treatment. This enhancement is caused by partitioning of Eu³⁺ ions into glassy phase instead of into the willemite crystals with progress of heat treatment. Such luminescent glass–ceramic nanocomposites are expected to find potential applications in solid‐state red lasers, phosphors, and optical display systems.     

Effect of silica doping on the densification and grain growth in zinc oxide

The ability of silica (SiO₂) in controlling the densification and grain growth behavior of nano crystalline zinc oxide (ZnO) has been systematically studied. It has been observed that SiO₂ acts as a sintering inhibitor in the ZnO–SiO₂ system up to 4 wt.% limiting value beyond which densification behavior of the system remains almost unchanged, especially above 1100 °C. The addition of SiO₂ to ZnO retards grain growth which in turn results a finer ultimate grain size as compared to the undoped ZnO. However, stabilization in grain size occurs at ≥4 wt.% SiO₂ addition. It has been observed that SiO₂ incorporation changes the grain growth mechanism up to 4 wt.% addition, beyond which no remarkable changes was noticed. The grain growth (n) shows distinctly different slopes as a function of sintering time for the SiO₂ doped ZnO systems than undoped ZnO. The different slopes tend to indicate that different diffusion mechanisms and probably the formation of a secondary phase (Zn–Si–O) at the grain boundary control the densification and grain growth. The thermal expansion coefficient of the system has been found to decrease substantially beyond 4 wt.% SiO₂ addition to ZnO.     

Iron-Doped,Mullite-Impregnated PVDF Composite: An Alternative Separator for a High Charge Storage Ceramic Capacitor

In this communication, the formation mechanism of the electroactive β phase, morphology and the dielectric activities of increasing doping concentration (0–1.2 M.W % of mullite) of Fe²⁺ ion-doped, mullite-impregnated polyvinylidene fluoride (PVDF) nanocomposite have been investigated. Differential thermal analysis (DTA) confirms the formation of an electroactive β phase, and Fourier transform infrared spectroscopy (FTIR) showed that the β phase increases simultaneously and attains the maximum increment of 2.6 times compared to pristine PVDF. X-ray diffraction (XRD) spectra also agreed well with the β-phase increment behaviour and also confirmed the presence of required mullite phases. Field emission scanning electron microscopy (FESEM) images indicate the strong interaction between the polymer matrix and different concentrations of Fe²⁺ ion-doped mullite particles, resulting in enhanced electroactive β phase formation and large dielectric constant of the nanocomposite films followed by significant low dielectric loss with high ac conductivity compared to pristine PVDF films at room temperature. This doped polymer composite can be used as a high dielectric separator and, using this separator, we have successfully fabricated a high-charge-storage device. This paper also demonstrates that the loading of conductive Fe²⁺ ions within the highly insulating mullite matrix has a critical concentration for the enhancement and nucleation of the electroactive β phase of the PVDF polymer. In this critical concentration, the highest formation of a β network and maximum numbers of homogeneously distributed iron-doped mullite (FeM) particles in PVDF matrix improves the effective interfacial polarization by Maxwell–Wagner–Sillar (MWS) polarization effect which is responsible for the enhancement of dielectric constant and ac conductivity followed by significant tangent loss. So, it can be concluded that the incorporation of Fe²⁺-doped mullite into PVDF matrix is an effective way to fabricate a high dielectric separator of high-charge-storage electronic devices.