Numerical simulation of atomic layer deposition for thin deposit formation in a mesoporous substrate

ZnO deposition in porous γ-Al₂O₃ via atomic layer deposition (ALD) is the critical first step for the fabrication of zeolitic imidazolate framework membranes using the ligand-induced perm-selectivation process (Science, 361 (2018), 1008–1011). A detailed computational fluid dynamics (CFD) model of the ALD reactor is developed using a finite-volume-based code and validated. It accounts for the transport processes within the feeding system and reaction chamber. The simulated precursor spatiotemporal profiles assuming no ALD reaction were used as boundary conditions in modeling diethylzinc reaction/diffusion in porous γ-Al₂O₃, the predictions of which agreed with experimental electron microscopy measurements. Further simulations confirmed that the present deposition flux is much less than the upper limit of flux, below which the decoupling of reactor/substrate is an accurate assumption. The modeling approach demonstrated here allows for the design of ALD processes for thin-film membrane formation including the synthesis of metal–organic framework membranes.     

Influence of Sulfur for Oxygen Substitution in the Solvolytic Reactions of Chloroformate Esters and Related Compounds

The replacement of oxygen within a chloroformate ester (ROCOCl) by sulfur can lead to a chlorothioformate (RSCOCl), a chlorothionoformate (ROCSCl), or a chlorodithioformate (RSCSCl). Phenyl chloroformate (PhOCOCl) reacts over the full range of solvents usually included in Grunwald-Winstein equation studies of solvolysis by an addition-elimination (A-E) pathway. At the other extreme, phenyl chlorodithioformate (PhSCSCl) reacts across the range by an ionization pathway. The phenyl chlorothioformate (PhSCOCl) and phenyl chlorothionoformate (PhOCSCl) react at remarkably similar rates in a given solvent and there is a dichotomy of behavior with the A-E pathway favored in solvents such as ethanol-water and the ionization mechanism favored in aqueous solvents rich in fluoroalcohol. Alkyl esters behave similarly but with increased tendency to ionization as the alkyl group goes from 1° to 2° to 3°. N,N-Disubstituted carbamoyl halides favor the ionization pathway as do also the considerably faster reacting thiocarbamoyl chlorides. The tendency towards ionization increases as, within the three contributing structures of the resonance hybrid for the formed cation, the atoms carrying positive charge (other than the central carbon) change from oxygen to sulfur to nitrogen, consistent with the relative stabilities of species with positive charge on these atoms.     

Hydrodynamical particle containment in a rotor‐stator spinning disk device

A novel type of rotor‐stator spinning disk device is proposed which allows for the entrapment of solid particles solely by hydrodynamic means. In this new configuration, the solid rotating disk is replaced with two conjoined rotors with a variable gap spacing. Liquid is fed through the top stator and can flow out again through the rotor‐rotor interior and the hollow rotation axis. Moreover, the volume between the two rotors is optionally filled with a highly porous reticulated carbon foam. It was found that particle containment was strongly improved by the presence of this reticulated foam as it hinders the buildup of centripetal boundary layer flow near the disks in the interior of the rotor‐rotor assembly. These centripetal boundary layers drag along particles resulting in a loss of containment. Experiments utilizing glass beads showed that particles with a diameter down to 17.8 µm can be completely entrapped when a carbon foam is placed between the two conjoined disks at rotor speeds up to the maximum investigated value of 178 rad s^?1. Additionally, the rotor‐rotor gap did not have an effect on the particle entrapment level when the reticulated carbon foam was omitted and can be ascribed to the build‐up of boundary layers, which is independent of rotor‐rotor distance. © 2015 American Institute of Chemical Engineers AIChE J, 61: 3656–3665, 2015     

Improvement of Palm Oil Biodiesel Filterability by Adsorption Methods

Palm oil biodiesel (POB) is characterized by a very high cold soak filtration time (CSFT), which places the acceptability of this biofuel at risk. Therefore, the effect of four adsorbents, namely diatomaceous earth, natural silicate (NS), neutral bleaching earth (NBE), and acid activated bleaching earth (AABE), at two levels of addition (1 and 5 wt%) or two temperatures (25 and 110 °C) on the precipitate content and CSFT of POB was investigated. The impact on total glycerin content, moisture content, and oxidative stability was also examined. All treatments significantly decreased the precipitate content, total glycerin content, and moisture content, but only treatments with NS, NBE, and AABE at 5 wt% and 25 °C achieved acceptable filterability. The OSI value was also decreased; however, it remained above the ASTM limit. Operational conditions of treatment with AABE were further optimized in a two‐factor, five‐level center composite design. The combination of 0.65 wt% AABE and 10 min at 25 °C decreased CSFT to below the ASTM limit. Lower adsorbent concentrations could be effective down to 0.44 wt%, given a corresponding increase in the contact time up to 30 min.     

A Reliable Method for Recycling (RE)‐Ba‐Cu‐O (RE: Sm,Gd, Y) Bulk Superconductors

Single grain (RE)‐Ba‐Cu‐O (RE: Sm, Gd, Y) high‐temperature superconductors are able to generate high magnetic fields. However, the relatively high cost of the raw materials and the low yield of the manufacturing process have impeded the development of practical applications of these materials to date. This article describes a simple, reliable, and economical method of recycling failed bulk (RE)‐Ba‐Cu‐O (RE: Sm, Gd, Y) samples. Sixty‐four failed bulk samples, with diameters up to 31 mm, were recycled with a yield of 90%. The key innovation in this recycling process involves reintroducing the liquid phase into the melt process, which is normally lost during the primary peritectic processing of these materials. This enables the direct re‐growth of failed samples from solid form without the need for re‐grinding into powder. We also demonstrate that the superconducting performance and microstructure of the recycled samples is similar to that of the primary grown samples.     

Serum Amyloid A Receptor Blockade and Incorporation into High-Density Lipoprotein Modulates Its Pro-Inflammatory and Pro-Thrombotic Activities on Vascular Endothelial Cells

The acute phase protein serum amyloid A (SAA), a marker of inflammation, induces expression of pro-inflammatory and pro-thrombotic mediators including ICAM-1, VCAM-1, IL-6, IL-8, MCP-1 and tissue factor (TF) in both monocytes/macrophages and endothelial cells, and induces endothelial dysfunction—a precursor to atherosclerosis. In this study, we determined the effect of pharmacological inhibition of known SAA receptors on pro-inflammatory and pro-thrombotic activities of SAA in human carotid artery endothelial cells (HCtAEC). HCtAEC were pre-treated with inhibitors of formyl peptide receptor-like-1 (FPRL-1), WRW4; receptor for advanced glycation-endproducts (RAGE), (endogenous secretory RAGE; esRAGE) and toll-like receptors-2/4 (TLR2/4) (OxPapC), before stimulation by added SAA. Inhibitor activity was also compared to high-density lipoprotein (HDL), a known inhibitor of SAA-induced effects on endothelial cells. SAA significantly increased gene expression of TF, NFκB and TNF and protein levels of TF and VEGF in HCtAEC. These effects were inhibited to variable extents by WRW4, esRAGE and OxPapC either alone or in combination, suggesting involvement of endothelial cell SAA receptors in pro-atherogenic gene expression. In contrast, HDL consistently showed the greatest inhibitory action, and often abrogated SAA-mediated responses. Increasing HDL levels relative to circulating free SAA may prevent SAA-mediated endothelial dysfunction and ameliorate atherogenesis.     

Molecular mechanisms of epigenetic variation in plants

Natural variation is defined as the phenotypic variation caused by spontaneous mutations. In general, mutations are associated with changes of nucleotide sequence, and many mutations in genes that can cause changes in plant development have been identified. Epigenetic change, which does not involve alteration to the nucleotide sequence, can also cause changes in gene activity by changing the structure of chromatin through DNA methylation or histone modifications. Now there is evidence based on induced or spontaneous mutants that epigenetic changes can cause altering plant phenotypes. Epigenetic changes have occurred frequently in plants, and some are heritable or metastable causing variation in epigenetic status within or between species. Therefore, heritable epigenetic variation as well as genetic variation has the potential to drive natural variation.     

Tunable bands in biased multilayer epitaxial graphene

We have studied the electronic characteristics of multilayer epitaxial graphene under a perpendicularly applied electric bias. Ultraviolet photoemission spectroscopy measurements reveal that there is notable variation of the electronic density-of-states in valence bands near the Fermi level. Evolution of the electronic structure of graphite and rotational-stacked multilayer epitaxial graphene as a function of the applied electric bias is investigated using first-principles density-functional theory including interlayer van der Waals interactions. The experimental and theoretical results demonstrate that the tailoring of electronic band structure correlates with the interlayer coupling tuned by the applied bias. The implications of controllable electronic structure of rotationally fault-stacked epitaxial graphene grown on the C-face of SiC for future device applications are discussed.     

Multi-photon imaging of amine-functionalized silica nanoparticles

A convenient and simple strategy for preparing water soluble, photoluminescent functionalized silica nanoparticles (M-dots) in the absence of fluorophores or metal doping is demonstrated. These M-dots can be used for bioimaging using one and two-photon microscopy. Because of their high photostability, low toxicity and high biocompatibility compared with Lumidot? CdSe/ZnS quantum dots, functionalized silica particles are superior alternatives for current bioimaging platforms. Moreover, the presence of a free amine group at the surface of the M-dots allows biomolecule conjugation (e.g. with antibodies, proteins) in a single step for converting these photoluminescent SiO(2) nanoparticles into multifunctional efficient vehicles for theragnostics.