Improvement of Palm Oil Biodiesel Filterability by Adsorption Methods

Palm oil biodiesel (POB) is characterized by a very high cold soak filtration time (CSFT), which places the acceptability of this biofuel at risk. Therefore, the effect of four adsorbents, namely diatomaceous earth, natural silicate (NS), neutral bleaching earth (NBE), and acid activated bleaching earth (AABE), at two levels of addition (1 and 5 wt%) or two temperatures (25 and 110 °C) on the precipitate content and CSFT of POB was investigated. The impact on total glycerin content, moisture content, and oxidative stability was also examined. All treatments significantly decreased the precipitate content, total glycerin content, and moisture content, but only treatments with NS, NBE, and AABE at 5 wt% and 25 °C achieved acceptable filterability. The OSI value was also decreased; however, it remained above the ASTM limit. Operational conditions of treatment with AABE were further optimized in a two‐factor, five‐level center composite design. The combination of 0.65 wt% AABE and 10 min at 25 °C decreased CSFT to below the ASTM limit. Lower adsorbent concentrations could be effective down to 0.44 wt%, given a corresponding increase in the contact time up to 30 min.     

A Reliable Method for Recycling (RE)‐Ba‐Cu‐O (RE: Sm,Gd, Y) Bulk Superconductors

Single grain (RE)‐Ba‐Cu‐O (RE: Sm, Gd, Y) high‐temperature superconductors are able to generate high magnetic fields. However, the relatively high cost of the raw materials and the low yield of the manufacturing process have impeded the development of practical applications of these materials to date. This article describes a simple, reliable, and economical method of recycling failed bulk (RE)‐Ba‐Cu‐O (RE: Sm, Gd, Y) samples. Sixty‐four failed bulk samples, with diameters up to 31 mm, were recycled with a yield of 90%. The key innovation in this recycling process involves reintroducing the liquid phase into the melt process, which is normally lost during the primary peritectic processing of these materials. This enables the direct re‐growth of failed samples from solid form without the need for re‐grinding into powder. We also demonstrate that the superconducting performance and microstructure of the recycled samples is similar to that of the primary grown samples.     

Serum Amyloid A Receptor Blockade and Incorporation into High-Density Lipoprotein Modulates Its Pro-Inflammatory and Pro-Thrombotic Activities on Vascular Endothelial Cells

The acute phase protein serum amyloid A (SAA), a marker of inflammation, induces expression of pro-inflammatory and pro-thrombotic mediators including ICAM-1, VCAM-1, IL-6, IL-8, MCP-1 and tissue factor (TF) in both monocytes/macrophages and endothelial cells, and induces endothelial dysfunction—a precursor to atherosclerosis. In this study, we determined the effect of pharmacological inhibition of known SAA receptors on pro-inflammatory and pro-thrombotic activities of SAA in human carotid artery endothelial cells (HCtAEC). HCtAEC were pre-treated with inhibitors of formyl peptide receptor-like-1 (FPRL-1), WRW4; receptor for advanced glycation-endproducts (RAGE), (endogenous secretory RAGE; esRAGE) and toll-like receptors-2/4 (TLR2/4) (OxPapC), before stimulation by added SAA. Inhibitor activity was also compared to high-density lipoprotein (HDL), a known inhibitor of SAA-induced effects on endothelial cells. SAA significantly increased gene expression of TF, NFκB and TNF and protein levels of TF and VEGF in HCtAEC. These effects were inhibited to variable extents by WRW4, esRAGE and OxPapC either alone or in combination, suggesting involvement of endothelial cell SAA receptors in pro-atherogenic gene expression. In contrast, HDL consistently showed the greatest inhibitory action, and often abrogated SAA-mediated responses. Increasing HDL levels relative to circulating free SAA may prevent SAA-mediated endothelial dysfunction and ameliorate atherogenesis.     

Molecular mechanisms of epigenetic variation in plants

Natural variation is defined as the phenotypic variation caused by spontaneous mutations. In general, mutations are associated with changes of nucleotide sequence, and many mutations in genes that can cause changes in plant development have been identified. Epigenetic change, which does not involve alteration to the nucleotide sequence, can also cause changes in gene activity by changing the structure of chromatin through DNA methylation or histone modifications. Now there is evidence based on induced or spontaneous mutants that epigenetic changes can cause altering plant phenotypes. Epigenetic changes have occurred frequently in plants, and some are heritable or metastable causing variation in epigenetic status within or between species. Therefore, heritable epigenetic variation as well as genetic variation has the potential to drive natural variation.     

Tunable bands in biased multilayer epitaxial graphene

We have studied the electronic characteristics of multilayer epitaxial graphene under a perpendicularly applied electric bias. Ultraviolet photoemission spectroscopy measurements reveal that there is notable variation of the electronic density-of-states in valence bands near the Fermi level. Evolution of the electronic structure of graphite and rotational-stacked multilayer epitaxial graphene as a function of the applied electric bias is investigated using first-principles density-functional theory including interlayer van der Waals interactions. The experimental and theoretical results demonstrate that the tailoring of electronic band structure correlates with the interlayer coupling tuned by the applied bias. The implications of controllable electronic structure of rotationally fault-stacked epitaxial graphene grown on the C-face of SiC for future device applications are discussed.     

Multi-photon imaging of amine-functionalized silica nanoparticles

A convenient and simple strategy for preparing water soluble, photoluminescent functionalized silica nanoparticles (M-dots) in the absence of fluorophores or metal doping is demonstrated. These M-dots can be used for bioimaging using one and two-photon microscopy. Because of their high photostability, low toxicity and high biocompatibility compared with Lumidot? CdSe/ZnS quantum dots, functionalized silica particles are superior alternatives for current bioimaging platforms. Moreover, the presence of a free amine group at the surface of the M-dots allows biomolecule conjugation (e.g. with antibodies, proteins) in a single step for converting these photoluminescent SiO(2) nanoparticles into multifunctional efficient vehicles for theragnostics.     

The Critical Role of Passive Permeability in Designing Successful Drugs

Passive permeability is a key property in drug disposition and delivery. It is critical for gastrointestinal absorption, brain penetration, renal reabsorption, defining clearance mechanisms and drug-drug interactions. Passive diffusion rate is translatable across tissues and animal species, while the extent of absorption is dependent on drug properties, as well as in vivo physiology/pathophysiology. Design principles have been developed to guide medicinal chemistry to enhance absorption, which combine the balance of aqueous solubility, permeability and the sometimes unfavorable compound characteristic demanded by the target. Permeability assays have been implemented that enable rapid development of structure-permeability relationships for absorption improvement. Future advances in assay development to reduce nonspecific binding and improve mass balance will enable more accurately measurement of passive permeability. Design principles that integrate potency, selectivity, passive permeability and other ADMET properties facilitate rapid advancement of successful drug candidates to patients.     

Entwicklung eines Transformationsmodells – Modularisierung schrittweise gedacht

For some years now, the process industry has been meeting the challenges of the markets with modular production and logistics concepts. This article presents this development process in the form of a four-stage transformation model. It is shown that the path towards modular production environments can be taken step by step. The motto is “evolution instead of revolution”. First, an overview of the state of the art of modularized production and logistics systems is given. Based on this, the article describes and classifies the four different stages of modularization.     

Field response of Ips paraconfusus,Dendroctonus brevicomis,and their predators to 2-methyl-3-buten-2-ol,a novel alcohol emitted by ponderosa pine

Methylbutenol (MBO) is a major component of the aggregation pheromone of the European spruce beetle Ips typographus and also has been found to be emitted in large amounts by several species of pine native to western North America. This study investigates the influence this signal may have on the behavior of North American bark beetles and examines whether MBO functions as a defensive compound for emitting pines. The response of two North American bark beetles (Ips paraconfusus and Dendroctonus brevicomis) and their predaceous beetles (Trogositidae and Cleridae) to MBO, pheromone, and monoterpenes in varying release rates was investigated in the field using Lindgren funnel traps. MBO exhibited no repellent properties when tested alone, nor did MBO appear to have any effect on the aggregation response of these bark beetles and their predators to their pheromones. These results provide no support for a defensive function of MBO.     

Proton Conductivity Measurements in Yttrium Barium Cerate by Impedance Spectroscopy

Proton-conducting solid-electrolyte perovskite ceramics based on acceptor-doped barium and strontium cerates have become the focus of extensive investigations as candidate materials for fuel cells that operate at moderate temperatures. To assess the suitability of a material for this application, it is necessary that bulk electrolyte conductivity be measured at the operating temperature. However, very little reliable published conductivity data exist above 600°C. Protonic conductivity in yttrium-doped barium cerate has been observed to be less at high temperatures than would be expected, based on the activation energy and preexponential for hydrogen transport at temperatures <300°C. Conductivity data obtained from impedance spectroscopy on BaCe_0.9Y_0.1O_3–α over the extended temperature range of 100°–900°C are presented. An Arrhenius plot of the data shows two distinct linear regions, suggesting that two different rate-limiting processes occur in series with a break-over transition at ∼250°C. The decrease in conductivity is apparently not due to dehydration. An activation energy for protonic transport of 0.26 eV, about one-half of the low-temperature value, is proposed, based on curve fitting of the high-temperature data.