Effect of additives on formation of natural gas hydrate

The formation of natural gas hydrate (NGH) is studied in this work. Kinetics data of hydrate formation with no agitation were collected at various concentrations of the aqueous solutions with different additives such as alkylpolyglucside, sodium dodecyl benzene sulfonate and potassium oxalate monohydrate. Various kinds of additive increased the formation rates of NGH and its storage capacity and reduced the induction time of NGH formation. Moreover, the storage capacity, the induction time and the hydrate formation rate were influenced by the concentration of the aqueous solution.     

Honey bees mating optimization algorithm for process planning problem

Process planning is a very important function in the modern manufacturing system. It impacts the efficiency of the manufacturing system greatly. The process planning problem has been proved to be a NP-hard problem. The traditional algorithms cannot solve this problem very well. Therefore, due to the intractability and importance of process planning problem, it is very necessary to develop efficiency algorithms which can obtain a good process plan with minimal global machining cost in reasonable time. In this paper, a new method based on honey bees mating optimization (HBMO) algorithm is proposed to optimize the process planning problem. With respect to the characteristics of process planning problem, the solution encoding, crossover operator, local search strategies have been developed. To evaluate the performance of the proposed algorithm, three experiments have been carried out, and the comparisons among HBMO and some other existing algorithms are also presented. The results demonstrate that the HBMO algorithm has achieved satisfactory improvement.     

油田联合站油水分离的模糊-PID控制

联合站油水分离过程是将高含水原油处理成为合格产品的重要生产过程，从控制理论角度看，此过程具有多变量、干扰因素复杂、非线性、大滞后、压力与界面强耦合的特点，为了实现此过程的自动控制，本文针对典型的两段式脱水工艺进行了理论分析，通过对人工智能控制经验的总结，确定了模糊-PID控制策略。     

Muscular fatigue and maximum endurance time assessment for male and female industrial workers

A single arm pushing experiment was conducted in an electronic factory in Yantai, China to assess muscular fatigue using the theoretical models of muscular strength and maximum endurance time (MET) developed by Ma et al. (2009). Seventy seven workers, including 38 males and 39 females, participated in the study. The muscular strength of pushing was measured after the subject pushed a stick, with a force of 2.5 kgf, for 0.5, 1.0, 1.5, 2.0, 2.5, and 3.0 min. Fatigue rate was determined based on a regression approach. In addition to the theoretical model, the MET for such a pushing task was also determined using four empirical models in the literature. The results indicated that females were more resistant to muscular fatigue than males in the pushing task. The results of the muscular strength prediction show that the predictability of the muscular strength model is acceptable. The prediction errors for muscular strength for female subjects were significantly lower than those of the male subjects. The predicted MET using the theoretical model, with a group constant k, was highly correlated with those using the empirical models compared in the current study.     

Improvement of Microwave Loss Tangent and Tunability of Ba0.55Sr0.45TiO3/MgO Composites Using the Heterogeneous Precipitation Method

Ba_0.55Sr_0.45TiO₃/MgO composites were successfully prepared by the heterogeneous precipitation method and their structural, surface morphological, tunable properties, and dielectric properties at microwave frequency were systemically investigated. Compared with the sample prepared by the traditional solid-state method, the sample prepared by the heterogeneous precipitation method exhibits a smaller grain size, more uniform microstructure, higher tunability, and lower microwave loss, and these properties are very beneficial to the development of the microwave tunable devices application. Moreover, the effects of La₂O₃ doping on the dielectric and tunable properties of BST/MgO composites are investigated. The result shows that the La³⁺-doped sample has higher tunability and lower microwave loss than the undoped one.     

Parametrized Maximum Principle Preserving Flux Limiters for High Order Schemes Solving Multi-Dimensional Scalar Hyperbolic Conservation Laws

In this paper, we will extend the strict maximum principle preserving flux limiting technique developed for one dimensional scalar hyperbolic conservation laws to the two-dimensional scalar problems. The parametrized flux limiters and their determination from decoupling maximum principle preserving constraint is presented in a compact way for two-dimensional problems. With the compact fashion that the decoupling is carried out, the technique can be easily applied to high order finite difference and finite volume schemes for multi-dimensional scalar hyperbolic problems. For the two-dimensional problem, the successively defined flux limiters are developed for the multi-stage total-variation-diminishing Runge–Kutta time-discretization to improve the efficiency of computation. The high order schemes with successive flux limiters provide high order approximation and maintain strict maximum principle with mild Courant-Friedrichs-Lewy constraint. Two dimensional numerical evidence is given to demonstrate the capability of the proposed approach.     

一种基于ARM的集中器的硬件实现

介绍了一种以ARM9为核心,以Windows CE5.0为操作系统的集中器。它符合国家电网的Q/GDW 374.2-2009技术标准,可以在国家电网中使用。给出了集中器的系统框图,介绍了集中器的主要实现电路,论述了其主要工作原理。     

A Quantitative Analysis of Current Practices in Optical Flow Estimation and the Principles Behind Them

The accuracy of optical flow estimation algorithms has been improving steadily as evidenced by results on the Middlebury optical flow benchmark. The typical formulation, however, has changed little since the work of Horn and Schunck. We attempt to uncover what has made recent advances possible through a thorough analysis of how the objective function, the optimization method, and modern implementation practices influence accuracy. We discover that “classical” flow formulations perform surprisingly well when combined with modern optimization and implementation techniques. One key implementation detail is the median filtering of intermediate flow fields during optimization. While this improves the robustness of classical methods it actually leads to higher energy solutions, meaning that these methods are not optimizing the original objective function. To understand the principles behind this phenomenon, we derive a new objective function that formalizes the median filtering heuristic. This objective function includes a non-local smoothness term that robustly integrates flow estimates over large spatial neighborhoods. By modifying this new term to include information about flow and image boundaries we develop a method that can better preserve motion details. To take advantage of the trend towards video in wide-screen format, we further introduce an asymmetric pyramid downsampling scheme that enables the estimation of longer range horizontal motions. The methods are evaluated on the Middlebury, MPI Sintel, and KITTI datasets using the same parameter settings.     

图的点可区别边染色算法研究

针对一般图设计了一种新型的点可区别边染色算法。该算法把概率思想和图染色相结合, 根据点可区别边染色的约束规则确立目标函数, 利用交换规则逐步寻优, 当目标函数的值满足要求时染色成功。给出详细算法步骤并进行了测试和分析, 实验结果表明该算法可以求出满足猜想的点可区别边色数。     

磁盘阵列环境下的取证目标系统重构

封存原始硬盘与业务系统服务的连续性是计算机取证中面临的一对矛盾。在独立硬盘环境中,问题的解决并不困难,但在磁盘阵列(RAID)环境下,目前还缺乏有效的解决办法。为此,为RAID环境下的取证目标系统的重构提出一套解决方案,并设计实现其中关键任务的处理软件。实验表明,该方法可适用于不同RAID等级、不同操作系统下的系统重构,使得用户感受不到重构得到的系统与原系统有任何差异。与数据同步方法相比,该方法可以有效地减少重构的时间开销,且不会破坏原始证据硬盘上的数据。