Free-hand sketches for 3D model retrieval using cascaded LSDA

Multimedia Tools and Applications - This study proposes a novel cascaded 3D model retrieval framework for automatically and accurately fitting 3D models to user freehand 2D sketches (or object...     

Efficient hybrid organic/inorganic photovoltaic cells utilizing n-type pentacene and intrinsic/p-type hydrogenated amorphous silicon

We demonstrate efficient hybrid inorganic/organic p-i-n photovoltaic (PV) devices with a p-type-doped hydrogenated amorphous silicon (a-Si:H), intrinsic a-Si:H, and an organic semiconductor, pentacene. The correlation between the electrical properties of the PV devices and the morphological properties of the pentacene films were investigated using absorption spectroscopy, X-ray diffraction, and scanning electron microscopy. The maximum power conversion efficiency can be increased by one order with respect to the devices using different thicknesses of a pentacene layer from 0.32% at 10 nm to above 3.0% at 30 nm. Photocarriers in PVs are suggested to be mainly generated in the intrinsic a-Si:H layer. The pentacene layer is used as the exciton-blocking and electron-transport layer. Thus, the structural quality of pentacene films plays an important role in PV performance.     

Determining estrogenic steroids in Taipei waters and removal in drinking water treatment using high-flow solid-phase extraction and liquid chromatography/tandem mass spectrometry

River water and wastewater treatment plant (WWTP) effluents from metropolitan Taipei, Taiwan were tested for the presence of the pollutants estrone (E1), estriol (E3), 17beta-estradiol (E2), and 17alpha-ethinylestradiol (EE2) using a new methodology that involves high-flow solid-phase extraction and liquid chromatography/tandem mass spectrometry. The method was also used to investigate the removal of the analytes by conventional drinking water treatment processes. Without adjusting the pH, we extracted 1-L samples with PolarPlus C18 Speedisks under a flow rate exceeding 100 mL/min, in which six samples could be done simultaneously using an extraction station. The adsorbent was washed with 40% methanol/60% water and then eluted by 50% methanol/50% dichloromethane. The eluate was concentrated until almost dry and was reconstituted by 20 microL of methanol. Quantitation was done by LC-MS/MS-negative electrospray ionization in the selected reaction monitoring mode with isotope-dilution techniques. The mobile phase was 10 mM N-methylmorpholine aqueous solution/acetonitrile with gradient elution. Mean recoveries of spiked Milli-Q water were 65-79% and precisions were within 2-20% of the tested concentrations (5.0-200 ng/L). The method was validated with spiked upstream river water; precisions were most within 10% of the tested concentrations (10-100 ng/L) with most RSDs<10%. LODs of the environmental matrixes were 0.78-7.65 ng/L. A pre-filtration step before solid-phase extraction may significantly influence the measurement of E1 and EE2 concentrations; disk overloading by water matrix may also impact analyte recoveries along with ion suppression. In the Taipei water study, the four steroid estrogens were detected in river samples (ca. 15 ng/L for E2 and EE2 and 35-45 ng/L for E1 and E3). Average levels of 19-26 ng/L for E1, E2, and EE2 were detected in most wastewater effluents, while only a single effluent sample contained E3. The higher level in the river was likely caused by the discharge of untreated human and farming waste into the water. In the drinking water treatment simulations, coagulation removed 20-50% of the estrogens. An increased dose of aluminum sulfate did not improve the performance. Despite the reactive phenolic moiety in the analytes, the steroids were decreased only 20-44% of the initial concentrations in pre- or post-chlorination. Rapid filtration, with crushed anthracite playing a major role, took out more than 84% of the estrogens. Except for E3, the whole procedure successfully removed most of the estrogens even if the initial concentration reached levels as high as 500 ng/L.     

三维三分量地震资料联合反演方法应用研究

文中基于三维三分量地震资料联合反演的基本原理,通过测井资料分析、交会图分析、初始模型的建立,利用纵波、转换波联合反演得到了纵波阻抗、横波阻抗、纵横波速度比、泊松比、λρ、μρ等属性体(λ、μ为拉梅系数,ρ为密度)。其中纵横波速度比属性对于反映气层分布较为准确,并显示低异常;λρ属性对反映油层分布较为准确,并表现为低λρ值。实际资料处理结果表明,利用纵波、转换波联合反演得到的储层预测结果与井资料符合率达80%,因此这些属性可作为储层分布范围划分的重要依据。     

Two channel digital watermarking for music based on exponential time-spread echo kernel

To robustly and imperceptibly embed copyright information as a watermark into music clips, a two channel digital watermarking system based on the least significant bit (LSB) method and echo hiding (EH) with a new exponential time-spread echo kernel (ETEK) is proposed. By spreading the echo so that it seems like natural room reverberation, as well as the use of two channels to separately watermark by the LSB method and the EH method which have complementary characteristics, the system provides satisfactory sound quality and exhibits both efficient retrieval capacity and robustness against attacks. Experiments show that the proposed system retrieves watermarks with 100% accuracy for all clips and is almost imperceptible. With a set of 42 attacks supplied by the StirMark Benchmark for Audio (SMBA), the proposed system has an average robustness of 0.98 where the ideal value is 1.00, and higher than any conventional methods. With these results, the proposed system is shown to be possible for the application to music distribution over the Internet.     

Effect of inclined roof on the airflow associated with a wind driven turbine ventilator

Rotating wind driven turbine ventilator has been used as cost-effective environmental friendly natural ventilation device. Rotating wind driven turbine ventilator type of device is usually installed on the rooftop to extract air extract air flow from a building to improve air quality and comfort. Performance investigations carried thus far on turbine ventilator have ignored the effect of the inclination on rooftop. An experimental program was, therefore, formulated at the aerodynamic laboratory of the University of New South Wales to study such effect on a simulated rooftop. The results obtained from the measured forces and rotational speeds on different configurations indicate that the effect is minimal in extracting air from a building at low wind speed. The static pressure and skin friction distributions on the simulated roof further supports this finding. Two important conclusions can be drawn from the present investigation: firstly, the presence of the inclined roof may extend the safety margin in the operation of a turbine ventilator at high wind speed by reducing the magnitude of the total force that acts on the ventilator; secondly the dependency of the total fore on low Reynolds number suggests that the efficiency and reliability of operation of such ventilator should be boosted through the provision of other power source such as solar power at low wind speed.     

Structural Basis for the Improved Potency of Peroxisome Proliferator‐Activated Receptor (PPAR) Agonists

The need to develop safer and more effective antidiabetic drugs is essential owing to the growth worldwide of the diabetic population. Targeting the PPAR receptor is one strategy for the treatment of diabetes; the PPAR agonists rosiglitazone and pioglitazone are already on the market. Here we report the identification of a potent PPAR agonist, 15 , whose PPARγ activation was more than 20 times better than that of rosiglitazone. Compound 15 was designed to incorporate an indole head with a carboxylic acid group, and 4‐phenylbenzophenone tail to achieve a PPARγ EC₅₀ of 10 nM . Compound 15 showed the most potent PPARγ agonist activity among the compounds we investigated. To gain molecular insight into the improved potency of 15 , a structural biology study and binding energy calculations were carried out. Superimposition of the X‐ray structures of 15 and agonist 10 revealed that, even though they have the same indole head part, they adopt different conformations. The head part of 15 showed stronger interactions toward PPARγ; this could be due to the presence of the novel tail part 4‐phenylbenzophenone, which could enhance the binding efficiency of 15 to PPARγ.     

Modeling of strained quantum-well lasers with spin-orbit coupling

A complete model with the spin-orbit coupling for strained quantum-well lasers is presented. Explicit formulas for the momentum-matrix elements are given. The improvement in the threshold current density of tensile strained quantum-well lasers, as compared with that of the unstrained quantum well, is shown to result from the enhanced momentum matrix. The differential gain and the linewidth enhancement factor are calculated. The theoretical results show a smaller linewidth enhancement factor for compressively and tensile strained quantum wells than that of the unstrained structure, as has been experimentally observed. The temperature behavior of both the radiative component and the Anger component of the threshold current density is shown. Due to a decrease of gain and differential gain with increasing temperature, the threshold carrier density in unstrained quantum wells is increased with a large increment of the Auger recombination current at high temperature. For strained quantum wells, this increment is moderate because of the smaller threshold carrier density