Survivable Network Design: The State of the Art

In the past few years the telecommunications industry has undergone significant changes. We are rapidly evolving to a state where audio/visual and data traffic is all provided on the same networks. Telecommunication companies are investing billions of dollars in the design and maintenance of telecommunication networks to provide the users with the better quality of service that they have begun to expect. Due to their high capacity, fiber optic cables have become the medium of choice in the deployment of such new networks worldwide. Such high capacities encourage telecommunication providers to create networks that are substantially more sparse than previous copper based networks. Unfortunately, with sparsity comes vulnerability to failure. Given the dependence on the varied services offered by the modern networks, the magnitudes of the investments involved and the costs of disasters it is only logical that researchers look at problems in survivable network design as an interesting research question. There have been a number of papers that have addressed these and other related issues. In this paper we try to classify the area of survivable network design and provide a classification scheme for the same.     

The fine structure of bicomponent polyester fibers

The application of alkaline hydrolysis to study the change in the fine structure of bicomponent polyester fibers as their surface is removed progressively was explored. The samples were prepared with a poly(butylene terephthalate) (PBT) sheath and a poly(ethylene terephthalate) (PET) core. The reagent used to hydrolyze the PBT was 1M NaOH in 75/25 methanol to water since it appeared to react topochemically with the fiber. The solution reacted more rapidly with PET than with PBT. Thus, when necessary to retard the weight loss of the bicomponent fibers, after a 2‐h hydrolysis with this reagent to remove PBT, it was replaced with aqueous 1M NaOH solution containing 0.1% cetrimmonium bromide. Unlike homofil PET or PBT fibers, where alkaline attack appeared to be confined to the surface and left the residue relatively smooth, the bicomponent fiber was attacked unevenly, and penetration to the PET core occurred before all the PBT at the surface was removed. Nevertheless, most of the reaction was confined initially to the PBT sheath. The tenacity and extension at break of the PBT–PET fiber passed through a maximum as hydrolysis progressed. The fall in tenacity at high weight losses is ascribed to increasing surface defects in the fiber surface. After removal of the PBT by the hydrolysis, the birefringence of the residue became progressively higher. The synergistic effect of the PBT sheath on the properties of the PET core and the possible causes of the nonuniform hydrolysis at the PBT surface are discussed. An equation is proposed that includes an interaction parameter, which can be utilized to determine which property is affected most by the hydrolysis of a bicomponent fiber. In this instance, it appears from the parameters that the order is strength > extension at break ≈ birefringence. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 1163–1173, 1999     

Preparation and characterization of spray-dried mucoadhesive microspheres of aceclofenac

Objective: Microencapsulation of the anti-inflammatory drug aceclofenac (ACE) was investigated as a means of controlling drug release and minimizing or eliminating local side effects. Method: Microspheres were prepared by a spray-drying technique using solutions of ACE and three polymers, namely, carbopol, chitosan, and polycarbophil, in different weight ratios. Results: The spray-dried mucoadhesive microspheres were characterized in terms of shape (scanning electron microscope), size (6.60–8.40 μm), production yield (34.10–55.62%), and encapsulation efficiency (58.14–90.57%). In vitro release studies were performed in phosphate buffer (pH 6.8) up to 10 hours. The spray-drying process of solutions of ACE with polymeric blends can give prolonged drug release. The in vitro release data were well fit into Higuchi and Korsmeyer–Peppas model and followed Fickian diffusion mechanism. In vivo data showed that the administration of ACE in polymeric microspheres prevented the gastric side effects. Conclusion: The formulations here described can be proposed for the oral administration of nonsteroidal anti-inflammatory drugs with minimal side effects on gastric mucosa.     

Analytical modeling for 3D potential distribution of rectangular gate (RecG) gate-all-around (GAA) MOSFET in subthreshold and strong inversion regions

In this paper, we have introduced an analytical subthreshold and strong inversion 3D potential model for rectangular gate (RecG) gate-all-around (GAA) MOSFET. The subthreshold and strong inversion potential distribution in channel region of a RecG MOSFET is obtained respectively by solving 3D Laplace and 3D Poisson equations. The assumed parabolic potential distribution along the z-axis in channel direction is appropriately matched with 3D device simulator after consideration of z-depended characteristic length in subthreshold region. For accurate estimation of short channel effects (SCE), the electrostatics near source and drain is corrected. The precise gate-to-gate potential distribution is obtained after consideration of higher order term in assumed parabolic potential profile. The model compares well with numerical data obtained from the 3D ATLAS as a device simulator and deckbuild as an interactive runtime of Silvaco Inc.     

An Indian test facility to characterise diagnostic neutral beam for ITER

The diagnostic neutral beam (DNB) line shall be used to diagnose the He ash content in the D–T phase of the ITER machine using the charge exchange recombination spectroscopy (CXRS). Implementation of a successful DNB at ITER requires several challenges related to the production, neutralization and transport of the neutral beam over path lengths of 20.665 m, to be overcome. The delivery is aided if the above effects are tested prior to onsite commissioning. As DNB is a procurement package for INDIA, an ITER approved Indian test facility, INTF, is under construction at Institute for Plasma Research (IPR), India and is envisaged to be operational in 2015. The timeline for this facility is synchronized with the RADI, ELISE (IPP, Garching), SPIDER (RFX, Padova) in a manner that best utilization of configurational inputs available from them are incorporated in the design. This paper describes the facility in detail and discusses the experiments planned to optimise the beam transmission and testing of the beam line components using various diagnostics.     

Synthesis and characterization of polymeric plasticizer from PET waste and its applications in nitrile rubber and nitrile–PVC blend

Polyethylene terephthalate (PET) waste is not biodegradable; thus, it will create environmental hazards if disposed in landfills. Therefore, the only way of addressing the problem of disposal of post-industrial and post-consumer PET wastes is through recycling. The polyester plasticizer for polyacrylonitrile butadiene rubber (NBR) and polyacrylonitrile butadiene–polyvinylchloride rubber blend (NBR–PVC) was obtained by the depolymerization of PET waste with 2-ethyl-1-hexanol. The PET waste was depolymerized until a polymeric plasticizer with the average molecular weight in the range of 450–900 g/mol was obtained. The polymeric plasticizer was characterized for acid and hydroxyl numbers, viscosity, density, FTIR, NMR and TGA/DTA thermogram. The prepared polymeric plasticizer was used in the preparation of nitrile rubber and nitrile–PVC rubber blend rubber sheets, where these sheets were tested for compatibility, tensile strength, elongation-at-break, hardness and ageing properties. Nitrile rubber and nitrile–PVC blend sheets were also prepared using DOP as a plasticizer and a comparative study with the synthesized polymeric plasticizer was made. It was observed that synthesized polymeric plasticizer provides excellent tensile properties and ageing resistance for high-performance applications as compared to that obtained from DOP. The end uses for nitrile rubber and nitrile–PVC rubber blend compounds are quite diverse, but they can be loosely categorized as being either general performances or higher performance applications. Each of these performance categories requires a different set of considerations in terms of compounding with plasticizers.     

DC and analog/RF performance optimisation of source pocket dual work function TFET

We investigate a systematic study of source pocket tunnel field-effect transistor (SP TFET) with dual work function of single gate material by using uniform and Gaussian doping profile in the drain region for ultra-low power high frequency high speed applications. For this, a n⁺ doped region is created near the source/channel junction to decrease the depletion width results in improvement of ON-state current. However, the dual work function of the double gate is used for enhancement of the device performance in terms of DC and analog/RF parameters. Further, to improve the high frequency performance of the device, Gaussian doping profile is considered in the drain region with different characteristic lengths which decreases the gate to drain capacitance and leads to drastic improvement in analog/RF figures of merit. Furthermore, the optimisation is performed with different concentrations for uniform and Gaussian drain doping profile and for various sectional length of lower work function of the gate electrode. Finally, the effect of temperature variation on the device performance is demonstrated.     

Wavelength Dependence of the Aerosol Angstrom Exponent and Its Implications Over Delhi,India

The aerosol optical depth (AOD), Angstrom coefficients (α and β), and the second-order Angstrom exponent (α′) obtained by Microtops-II sun photometer have been analyzed in the spectral range 0.34–0.87 μm over the urban polluted city of Delhi, India for the period 2007–2008, aiming at investigating the physical and optical properties of aerosols. The average values of AOD at 500 nm, α and β (in the range 340–870 nm) are found to be 0.78 ± 0.32, 0.78 ± 0.28, and 0.45 ± 0.21, respectively, for the entire period of observations. The AOD data show significant curvature in the lnτ versus lnλ relationship suggesting different dominant aerosol types depending on season. In order to analyze further the curvature effect and the relative dominance of aerosol size, α has been calculated in three wavelength bands, i.e., shorter (0.34–0.50 μm), longer (0.675–0.87 μm), and broad (0.34–0.87 μm) during four seasons, summer (April–June), monsoon (July–September), winter (October–January), and spring (February–March) accompanied with calculations of α′, which quantifies the deviation of logarithmic behavior of AOD with lnλ. The α′ values are found to be positive and higher in the months of October–December and mostly negative in February and March, while close to zero values of α′ are found in April–August. These results indicate that winter season exhibits dominance of fine-mode aerosols while summer relatively higher concentration of coarse-mode particles. On the other hand, monsoon and spring seasons revealed the presence of mixed type, both fine- and coarse-mode aerosols over Delhi.     

The influence of subzero temperatures on fatigue behavior of composite sandwich structures

The fatigue lives and failure modes of foam core carbon/epoxy and glass/epoxy composite sandwich beams in 4-point bending were characterized from room temperature (22 °C) down to −60 °C. Similar previous investigations had focused on elevated temperatures only, but the low temperature fatigue behavior must be understood so that these materials may be evaluated for possible use in the hull structures of ships, which operate in cold regions. Core shear was found to be the dominant fatigue failure mode for the test specimens over the entire temperature range from 22 °C down to −60 °C. Significant increases in the useful fatigue life with brittle type core shear failure were observed at low temperatures by comparison with the corresponding room temperature behavior. Fatigue failure at the low temperatures was catastrophic and without any significant early warning, but the corresponding failures at room temperature were preceded by relatively slow but steadily increasing losses of stiffness. Two different approaches were used to investigate stiffness reductions during fatigue tests, and both approaches led to the same conclusions. Experimental observations regarding the location of fatigue crack initiation were confirmed by static finite element analyses for both materials.     

Local Dynamics of Adhesives in Aggressive Environment in the Pre-Damage Stage

Molecular aspects of chemical and physical changes in adhesive joints caused by absorbed moisture were investigated. The focus was on the pre-damage stage that precedes the formation of voids and microcracks. A model and a commercial epoxy-amine formulation were studied. Local dynamics were monitored by broad-band dielectric relaxation spectroscopy (DRS). One portion of the absorbed water does not form hydrogen bonds with the network and gives rise to a fast relaxation process (termed γ) with activation energy of 28 kJ/mol. The local β dynamics are slowed down by the interactions between water and various sites on the network that include the ether oxygen, the hydroxyl group and the tertiary amine nitrogen. One particularly significant finding is that the average relaxation time for the β process above 20°C is of the order of nanoseconds or less and, hence, the detection and monitoring of this process hinges upon the ability to perform high-precision DRS at frequencies above 1 MHz. This is an important consideration in the ongoing efforts aimed at the implementation of DRS as nondestructive inspection (NDI) tool for adhesive joints.