Influence of Undercooling and Nd4Ba2Cu2O10 Content on the Growth Rate of Large-Grain Bulk Nd-Ba-Cu-O Superconductor

The dependence of growth rate on isothermal undercooling and composition has been investigated for Nd-Ba-Cu-O single grains containing various amounts of nonsuperconducting Nd₄Ba₂Cu₂O₁₀ (Nd-422) phase inclusions and fabricated under a 1% O₂ in N₂ atmosphere using a top seeded melt growth technique. The growth rate along the crystallographic c -direction is observed to exceed that along the a / b direction at all undercooling temperatures and exhibits a maximum for a Nd-422 content of ∼10 mol%. The samples have been examined by optical microscopy and the results interpreted within an established planar solidification model.     

Removal of toxic metal Cr(VI) from aqueous solutions using sawdust as adsorbent: Equilibrium, kinetics and regeneration studies

In the present study, a low-cost adsorbent is developed from the naturally and abundantly available sawdust which is biodegradable. The removal capacity of Cr(VI) from aqueous solutions and from the synthetically prepared industrial effluent of electroplating and tannery industries is obtained. The batch experiments are carried out to investigate the effect of the significant process parameters such as initial pH, change in pH during adsorption, contact time, adsorbent amount, and the initial Cr(VI) concentration. The maximum adsorption of Cr(VI) on sawdust is obtained at an initial pH value of 1. The value of pH increases with increase in contact time and initial Cr(VI) concentration. The equilibrium data for the adsorption of Cr(VI) on sawdust is tested with various adsorption isotherm models such as Langmuir, Freundlich, Redlich–Peterson, Koble–Corrigan, Tempkin, Dubinin–Radushkevich and Generalized equation. The Langmuir isotherm model is found to be the most suitable one for the Cr(VI) adsorption using sawdust and the maximum adsorption capacity obtained is 41.5 mg g⁻¹ at a pH value of 1. The adsorption process follows the second-order kinetics and the corresponding rate constants are obtained. Desorption of Cr(VI) from sawdust using acid and base treatment exhibited a higher desorption efficiency by more than 95%. A feasible solution is proposed, for the disposal of the contaminant (acid and base solutions) containing high concentration of Cr(VI) obtained during the desorption process. The interference of other ions which are generally present in the electroplating and tannery industrial effluent streams on the Cr(VI) removal is investigated.     

In situ velocity measurements of very high power ultrasonic additive manufacturing using a photonic Doppler velocimeter

To understand the dynamic structural movements of very high power ultrasonic additive manufacturing, simultaneous in situ velocity measurements of the sonotrode, welding foil and substrate during consolidation were made using a photonic Doppler velocimeter. During consolidation in which the welding foil was successfully bonded to the substrate, the welding foil and substrate had similar vibration phase angles which came into and then out of phase of the sonotrode; in addition to having large changes in relative velocity as the normal force from the sonotrode was applied and then removed. A consolidation pass in which no bonding occurred, consisted of relatively constant velocity amplitude for all structures. The welding foil and sonotrode remained fully coupled and in phase, but was out of phase of the substrate during the entire welding pass. Therefore, by examining velocity and phase data, bonding versus non-bonding conditions can be determined in situ using the photonic Doppler velocimeter system.     

Delamination failures of Stellite hardfacing in power plants: a microstructural characterisation study

In recent years, several incidents of cracking and failures have been observed in Stellite (Stellite is a registered trademark of the Deloro-Stellite Corporation) hardfacing used in valves of modern high temperature combined cycle gas fired power plants. These hardfacing layers are applied as an overlay onto a steel substrate, such as CrMo steel (i.e. Grade 22, WC9) or creep strength enhanced ferritic steel (i.e. Grade 91, C12A). Cracking has been observed in valve components at the Stellite/steel interface and in the weld dilution zone formed between the steel and clad. Ultimately, disbonding or delamination of the weld hardfacing from the valve body occurs and has resulted in collateral damage to components in the plant (such as to the turbine) or valve failure. In this study, the microstructure formed near the Stellite/steel interface is investigated. Based on thermodynamic modelling, microstructure formed at these regions is hypothesised and a simple methodology is proposed to predict the occurrence of these failures.     

Screening of β1- and β2-Adrenergic Receptor Modulators through Advanced Pharmacoinformatics and Machine Learning Approaches

Cardiovascular diseases (CDs) are a major concern in the human race and one of the leading causes of death worldwide. β-Adrenergic receptors (β1-AR and β2-AR) play a crucial role in the overall regulation of cardiac function. In the present study, structure-based virtual screening, machine learning (ML), and a ligand-based similarity search were conducted for the PubChem database against both β1- and β2-AR. Initially, all docked molecules were screened using the threshold binding energy value. Molecules with a better binding affinity were further used for segregation as active and inactive through ML. The pharmacokinetic assessment was carried out on molecules retained in the above step. Further, similarity searching of the ChEMBL and DrugBank databases was performed. From detailed analysis of the above data, four compounds for each of β1- and β2-AR were found to be promising in nature. A number of critical ligand-binding amino acids formed potential hydrogen bonds and hydrophobic interactions. Finally, a molecular dynamics (MD) simulation study of each molecule bound with the respective target was performed. A number of parameters obtained from the MD simulation trajectories were calculated and substantiated the stability between the protein-ligand complex. Hence, it can be postulated that the final molecules might be crucial for CDs subjected to experimental validation.     

Modelling and analysis of abrasive water jet cut surface topography

In this paper, a new approach proposed for modelling the three-dimensional (3D) topography produced on abrasive water jet (AWJ) cut surface is presented. It makes use of the trajectory of jet, predicted from the theory of ballistics and Bitter’s theory of erosion for material removal, for numerically simulating the cutting front. The 2D topography at different depths of the cut surface is generated by considering the trajectories on the cutting front and the abrasive particles impacting the walls of cut surface randomly. For realistic generation of topography on cut surfaces, several instantaneous profiles generated in each region of cut are superimposed to obtain an effective profile. The nature of effective profiles thus predicted is analyzed and validated using power spectral density analysis. The effective profiles predicted at different depths are in turn used to generate the 3D topography of AWJ cut surface. Results obtained with the proposed model are validated with the experimental results.     

The Effect of a Sustained High-Fat Diet on the Metabolism of White and Brown Adipose Tissue and Its Impact on Insulin Resistance: A Selected Time Point Cross-Sectional Study

(1) Background: studies on the long-term dynamic changes in fat depot metabolism in response to a high-fat diet (HFD) on hepatic lipid deposition and insulin resistance are sparse. This study investigated the dynamic changes produced by HFD and the production of dysfunctional fat depots on insulin resistance and liver lipid metabolism. (2) Methods: mice fed a chow or HFD (45% kcal fat) diet had three fat depots, liver, and blood collected at 6, 10, 20, and 30 weeks. Anthropometric changes and gene markers for adipogenesis, thermogenesis, ECM remodeling, inflammation, and tissue insulin resistance were measured. (3) Results: early responses to the HFD were increased body weight, minor deposition of lipid in liver, increased adipocyte size, and adipogenesis. Later changes were dysfunctional adipose depots, increased liver fat, insulin resistance (shown by changes in ITT) accompanied by increased inflammatory markers, increased fibrosis (fibrosis > 2-fold, p < 0.05 from week 6), and the presence of crown cells in white fat depots. Later, changes did not increase thermogenic markers in response to the increased calories and decreased UCP1 and PRDM16 proteins in WAT. (4) Conclusions: HFD feeding initially increased adipocyte diameter and number, but later changes caused adipose depots to become dysfunctional, restricting adipose tissue expansion, changing the brown/beige ratios in adipose depots, and causing ectopic lipid deposition and insulin resistance.     

Influence of Pd Precursor and Method of Preparation on Hydrodechlorination Activity of Alumina Supported Palladium Catalysts

A series of alumina supported Pd catalysts were prepared by the novel deposition-precipitation method adopting the chloride precursor (DP-Cl) of Pd and varying the metal content from 0.25 to 1.0 wt%. The catalytic properties of prepared catalysts were studied by various characterization techniques such as N₂ adsorption, CO chemisorption, TPR, XRD, XPS, and TEM techniques. The activity and stability of the catalysts were evaluated for the gas phase hydrodechlorination (HDC) of chlorobenzene operating at atmospheric pressure. At 1 wt% of Pd the catalyst showed higher chlorobenzene conversion with good stability when tested for a period of 25 h, whereas the other catalysts exhibited a loss in activity with time. In order to elucidate the exceptional activity and stability of this catalyst, a few more catalysts with 1 wt% Pd were prepared by impregnation technique and also using a non-chloride precursor, palladium nitrate. The 1 wt% DP-Cl catalyst again was found to be the best among the others. The activity and stability of the DP-Cl catalyst was also found to be superior to two low-dispersed catalysts, each with 10 wt% Pd, prepared by conventional impregnation method using the chloride and nitrate as the precursors. The characterization results reveal that the high activity and stability of the DP-Cl catalyst is related to the formation of electron deficient Pd species and its stabilization in the octahedral vacancies of alumina.     

A comparison of seven filling to packing switchover methods for injection molding

The effectiveness of seven methods for controlling switchover from the filling to packing stage were investigated, including: (1) screw position, (2) injection time, (3) machine pressure, (4) nozzle pressure, (5) runner pressure near the sprue, (6) cavity pressure near the gate, and (7) cavity temperature at the end of flow. The activation threshold for each of the seven switchover methods was iteratively determined so as to produce similar part weights relative to a standard process. A design of experiments was implemented for each of the seven switchover methods that perturbs the process settings by an amount equal to six standard deviations of the standard process so as to replicate the expected long‐term process variation. The results suggest that conventional switchover methods (e.g., screw position) had lower short‐term variation, but other methods were more robust with respect to rejecting long‐term process variation. The merits of different dimensional measurements for quality control are also discussed relative to the society of the plastics industry (SPI) standard tolerances. POLYM. ENG. SCI., 50:2031–2043, 2010. © 2010 Society of Plastics Engineers     

Multi-objective optimization of industrial styrene reactor: Adiabatic and pseudo-isothermal operation

Multi-objective differential evolution (MODE) is used to optimize an industrial styrene reactor considering productivity, selectivity and yield as the main objectives. Two reactor configurations (single bed adiabatic operation and steam injected pseudo-isothermal operation) and four combinations of objectives consisting of 5 and 7 variables respectively are considered. Pareto optimal solutions are obtained for all combinations of objective functions for both the configurations. The results are compared with those reported in the literature and an industrial operating point. For all the cases considered, MODE is able to give a Pareto front better (in terms of wider range and a better spread) than that obtained using NSGA for both the configurations. Steam injected reactor configuration is better than the adiabatic reactor configuration in terms of performance. The Pareto optimal solutions obtained from such studies provide a wide range of optimal operating conditions from which an appropriate operating point can be selected based on the requirements of the decision maker.