CO(2) Adsorption on Activated Carbon Honeycomb-Monoliths: A Comparison of Langmuir and Tóth Models

Activated carbon honeycomb-monoliths with different textural properties were prepared by chemical activation of African palm shells with H(3)PO(4), ZnCl(2) and CaCl(2) aqueous solutions of various concentrations. The adsorbents obtained were characterized by N(2) adsorption at 77 K, and their carbon dioxide adsorption capacities were measured at 273 K and 1 Bar in volumetric adsorption equipment. The experimental adsorption isotherms were fitted to Langmuir and Tóth models, and a better fit was observed to Tóth equation with a correlation coefficient of 0.999. The maximum experimental values for adsorption capacity at the highest pressure (2.627-5.756 mmol·g(-1)) are between the calculated data in the two models.     

A versatile synthesis method of dendrites-free segmented nanowires with a precise size control

ABSTRACT: We report an innovative strategy to obtain cylindrical nanowires combining well established and low-cost bottom-up methods such as template-assisted nanowires synthesis and electrodeposition process. This approach allows the growth of single-layer or multi-segmented nanowires with precise control over their length (from few nanometers to several micrometers). The employed techniques give rise to branched pores at the bottom of the templates and consequently dendrites at the end of the nanowires. With our method, these undesired features are easily removed from the nanowires by a selective chemical etching. This is crucial for magnetic characterizations where such non-homogeneous branches may introduce undesired features into the final magnetic response. The obtained structures show extremely narrow distributions in diameter and length, improved robustness and high-yield, making this versatile approach strongly compatible with large scale production at an industrial level. Finally, we show the possibility to tune accurately the size of the nanostructures and consequently provide an easy control over the magnetic properties of these nanostructures.     

Synthesis and functional characterization of tridegin and its analogues: inhibitors and substrates of factor XIIIa

Tridegin, a 66‐mer peptide isolated from the leech Haementeria ghilianii, is a potent inhibitor of the coagulation factor XIIIa. This paper describes the chemical synthesis of tridegin by two different strategies—solid‐phase assembly and native chemical ligation—both followed by oxidation in solution phase. Tridegin and truncated analogues were examined for their activity and revealed a particular importance of the C‐terminal region of the parent peptide. Based on these studies a minimal sequence required for factor XIIIa inhibition could be identified. Our data revealed that the glutamine residue at position 52 (Q⁵²) of tridegin most likely binds to the active site of factor XIIIa and was therefore suggested to react with the enzyme. The function of the N‐terminal region is also discussed, as the isolated C‐terminal segment of tridegin lost its inhibitory activity rapidly in the presence of factor XIIIa, whereas this was not the case for the full‐length inhibitor.     

Design, synthesis, and biological evaluation of 2-aminobenzanilide derivatives as potent and selective HDAC inhibitors

Epigenetic regulation is an essential process for the normal functioning of genes. Therefore, targeting epigenetic dysregulation in cancer may be a valid therapeutic approach for the treatment of this severe disease. Histone deacetylases (HDACs) are enzymes involved in the regulation of epigenetic post-translational modifications; because they are overexpressed in many types of cancer, HDACs are valuable targets for the development of new anticancer agents. A large series of 2-aminobenzanilides linked at the 4'-position to α-amino acid amides, arenes, and heteroarenes through a methylene bridge were designed, synthesized, and tested as novel HDAC inhibitors. Several compounds showed IC(50) values in the two-digit nanomolar range in hrHDAC1 inhibition assays, lower than that of the reference compound MS-275. They also showed interesting selectivity profiles, as confirmed by western blot assays.     

Performance of clay masonry prisms with light weight plaster exposed to standard fire exposure

Clay bricks are one of the most widely used materials in building construction due to their advantages, including local availability, ease of fabrication and cost-effectiveness. Fire is one of the dangerous hazards that can cause damage the life and property. Lightweight plasters play a vital role in insulating the masonry construction during fire accident. There is only limited data and information available on the fire performance of Clay Brick Masonry (CBM) insulated with lightweight plaster. An extensive investigation was undertaken to evaluate the residual strength properties and physical characteristics of CBM prisms exposed to elevated temperatures. CBM prisms plastered with M-sand mortar, vermiculite mortar, and perlite mortar were used for the investigation. Protected prisms were exposed to elevated temperatures following the ISO 834 standard fire curve for durations of 30 min (821°C), 60 min (925°C), 90 min (986°C), and 120 min (1029°C). Mechanical properties such as axial load carrying capacity, stress–strain behaviour, elastic modulus, and crack pattern were examined. The mechanical properties of CBM prisms were found to be highly influenced by the type of plastering, intensity, and the duration of heating. The microstructure and image analysis confirmed the effects of temperature exposure on protective plasters. Equations are proposed to determine the residual axial compressive strength and the elastic modulus of CBM. It was found that the specimens plastered with perlite mortar had better fire resistance.     

Eco-friendly flame retardant epoxy nanocomposites based on polyphosphonate and halloysite nanotubes

The preparation of a novel polyphosphonate (PSFR) is described here, starting from phenylphosphonic dichloride and an equimolecular mixture containing equal amounts of two bisphenols, namely 4,4′-dihydroxydiphenyl sulfone and 2-(6-oxido-6H-dibenzo<c,e><1,2>oxaphosphorin-6-yl)-1,4-benzenediol, following the polycondensation reaction in solution. Then, new environmental-friendly nanocomposites having improved flame retardancy have been prepared by incorporating PSFR and halloysite nanotubes (HNTs) into epoxy resin. The effect of PSFR and HNTs contents on the chemical and physical characteristics of epoxy nanocomposites was investigated. The success of the reactions was monitored by infrared spectroscopy (FTIR) while microscopic related techniques (SEM) gave information on the morphology of the products. The thermosets exhibit glass transition temperatures in the range of 62.4–97.1°C and thermal decomposition temperatures in the interval of 296–359°C. The appearance of the char residues obtained by pyrolysis was studied by SEM measurements. The flammability behavior has been studied by microscale combustion calorimetry (MCC) tests. A considerable improvement in the flame retardancy of the thermosets was obtained by simultaneous incorporation of HNTs (10 wt%) and PSFR (equivalent of 1 wt% P) into epoxy resin.     

Suitability of Sodium Pyruvate as Decomposer of Carried-over Liquid Hydrogen Peroxide

The aim of the present study was to evaluate the concentration of sodium pyruvate in growth media by using the most-probable number method to decompose carried-over liquid hydrogen peroxide (H₂O₂) without negative influences on correct enumeration of Geobacillus stearothermophilus spores. An equivalent molar ratio of sodium pyruvate and H₂O₂ was verified to be sufficient for a complete decomposition. The results showed that by exposition of G. stearothermophilus spores in different liquid hydrogen peroxide and by carry-over of concentrations ranging from 3.56 · 10⁻⁶ up to 1.69 · 10⁻⁴ mol, a sodium pyruvate concentration of 0.05 mol L⁻¹ in growth media was most efficient for the recovery of spores.     

Chromic textiles: Colour fastness properties and irreversible colour change behaviour of textiles screen printed with thermochromic,photochromic and hydrochromic colourants

The objective of this work was to study how ultraviolet (UV) light exposure, washing and rubbing can influence colour and dynamic qualities of chromic textiles, and to explore how the results attained can be applied by designers for the development of colour changing palettes. The experimental work was conducted with 74% polyamide and 26% elastane elastics screen printed with thermochromic, photochromic and hydrochromic pigments in diverse colours. Initially, colourfastness properties of each pigment type versus colour were assessed. Although washing and rubbing can interfere in samples' colours by becoming lighter at different degrees, the results attained highlight the poor stability to lighting of thermochromic and photochromic pigments, which also present changes between hues along exposure time. For conventional textile applications, poor colour fastness commonly represents a limitation. This work proposes that the way textile colours and behaviour are permanently affected by the studied conditions can be interpreted as a creative variable in the design process. Research samples with a combination of pigments were developed and tested with a combination of cycles of different fastness tests, namely one washing cycle for every 4 h of UV light exposure, totalling 48 h and 12 washing cycles. Results demonstrate the possibility of creating interactive surfaces capable of displaying a wide range of colours that evolve to static within different hues, over stimuli conditions.     

Evolutionary Interactions Between Visual and Chemical Signals: Chemosignals Compensate for the Loss of a Visual Signal in Male <Emphasis Type="Italic">Sceloporus</Emphasis> Lizards

Animals rely on multimodal signals to obtain information from conspecifics through alternative sensory systems, and the evolutionary loss of a signal in one modality may lead to compensation through increased use of signals in an alternative modality. We investigated associations between chemical signaling and evolutionary loss of abdominal color patches in males of four species (two plain-bellied and two colorful-bellied) of Sceloporus lizards. We conducted field trials to compare behavioral responses of male lizards to swabs with femoral gland (FG) secretions from conspecific males and control swabs (clean paper). We also analyzed the volatile organic compound (VOC) composition of male FG secretions by stir bar extraction and gas chromatography-mass spectrometry (GC-MS) to test the hypothesis that loss of the visual signal is associated with elaboration of the chemical signal. Males of plain-bellied, but not colorful-bellied species exhibited different rates of visual displays when exposed to swabs of conspecific FG secretions relative to control swabs. The VOC composition of male Sceloporus FG secretions was similar across all four species, and no clear association between relative abundances of VOCs and evolutionary loss of abdominal color patches was observed. The emerging pattern is that behavioral responses to conspecific chemical signals are species- and context-specific in male Sceloporus, and compensatory changes in receivers, but not signalers may be involved in mediating increased responsiveness to chemical signals in males of plain-bellied species.     

Use of Repetitive Sequences for Molecular and Cytogenetic Characterization of Avena Species from Portugal

Genomic diversity of Portuguese accessions of Avena species—diploid A. strigosa and hexaploids A. sativa and A. sterilis—was evaluated through molecular and cytological analysis of 45S rDNA, and other repetitive sequences previously studied in cereal species—rye subtelomeric sequence (pSc200) and cereal centromeric sequence (CCS1). Additionally, retrotransposons and microsatellites targeting methodologies—IRAP (inter-retrotransposon amplified polymorphism) and REMAP (retrotransposon-microsatellite amplified polymorphism)—were performed. A very high homology was detected for ribosomal internal transcribed sequences (ITS1 and ITS2) between the species analyzed, although nucleolar organizing regions (NOR) fluorescent in situ hybridization (FISH) analysis revealed distinct number of Nor loci between diploid and hexaploid species. Moreover, morphological diversity, evidenced by FISH signals with different sizes, was observed between distinct accessions within each species. pSc200 sequences were for the first time isolated from Avena species but proven to be highly similar in all genotypes analyzed. The use of primers designed for CCS1 unraveled a sequence homologous to the Ty3/gypsy retrotransposon Cereba, that was mapped to centromeric regions of diploid and hexaploid species, being however restricted to the more related A and D haplomes. Retrotransposon-based methodologies disclosed species- and accessions-specific bands essential for the accurate discrimination of all genotypes studied. Centromeric, IRAP and REMAP profiles therefore allowed accurate assessment of inter and intraspecific variability, demonstrating the potential of these molecular markers on future oat breeding programs.