Methods to Investigate the Adhesion of Soft Nano‐Coatings on Metal Substrates – Application to Polymer‐Coated Stents

Soft coatings are widely used to tailor the surface chemistry of materials without altering their bulk properties. However, the strength of adhesion between the coating and the substrate must be high enough for long‐term applications. This has become a major challenge in the medical field, especially for polymer‐coated stents, mainly due to several coating failures reported after mechanical expansion during clinical implantation. In this work, the applicability of current polymer‐metal adhesion tests to polymer‐coated stents is discussed. The small punch test was proposed as an adhesion test that allows fundamental studies on the adhesion and coating properties. This adhesion test was applied to thin fluorocarbon coatings deposited by plasma on 316L stainless steel.

     

Syngas combustion in a chemical-looping combustion system using an impregnated Ni-based oxygen carrier

Chemical-looping combustion (CLC) has emerged as a promising option for CO₂ capture because this gas is inherently separated from the other flue gas components and thus no energy is expended for the separation. This technology would have some advantages if it could be adapted for its use with coal as fuel. In this sense, a process integrated by coal gasification and CLC could be used in power plants with low energy penalty for CO₂ capture. This work presents the results obtained in the combustion of syngas as fuel with a Ni-based oxygen carrier prepared by impregnation in a CLC plant under continuous operation. The effect on the oxygen carrier behaviour and the combustion efficiency of several operating conditions was determined in the continuous CLC plant. High combustion efficiencies (～99%), close to the values limited by thermodynamics, were reached at oxygen carrier-to-fuel ratios higher than 5. The temperature in the FR had a significant influence, although high efficiencies were obtained even at 1073 K. The syngas composition had small effect on the combustion, obtaining high and similar efficiencies with syngas fuels of different composition, even in the presence of high CO concentrations. The low reactivity of the oxygen carrier with CO seemed to indicate that the water gas shift reaction acts as an intermediate step in the global reaction of the syngas in a continuous CLC plant. Neither agglomeration nor carbon deposition problems were detected during 50 h of continuous operation in the prototype. The obtained results showed that the impregnated Ni-based oxygen carrier could be used in a CLC plant for the combustion of syngas produced in an integrated gasification combined cycle (IGCC).     

Maternal dietary habits and mycotoxin occurrence in human mature milk

During 2006, 82 samples of human mature milk were collected at Italian hospitals and checked for aflatoxin M1 (AFM1) and ochratoxin A (OTA) by immunoaffinity column extraction and HPLC. AFM1 was detected in four (5%) of milk samples (ranging from < 7 ng/L to 140 ng/L; mean level: 55.35 ng/L); OTA was detected in 61 (74%) of milk samples (ranging from < 5 ng/L to 405 ng/L; mean level: 30.43 ng/L. OTA levels were significantly higher (p less, not double equals 0.05) in milk of habitual consumers of bread, bakery products and cured pork meat. No other statistically significant differences were observed although habitual consumers of pasta (p = 0.059), cookies (p = 0.061) and juices (p = 0.063) had mean contamination values of OTA higher than the moderate consumer. The very few AFB1 positive samples did not allow statistical comparisons. The present study confirms that the occurrence of OTA in human milk is related to maternal dietary habits. The findings support the possibility of dietary recommendations to woman, during pregnancy and lactation, aimed to tentatively reduce the OTA contamination of human milk.     

Basis for the new challenges of growing broccoli for health in hydroponics

BACKGROUND: Variations in the contents of phytochemicals with biological activity in broccoli could originate as a result of genetic and environmental factors. An understanding of the effects of growth conditions on the bioactive compounds in broccoli is essential for improving its quality and nutritive value. Using salinity (40 mmol L^?1 NaCl), and foliar sprayed compounds (methionine, tryptophan and chitosan) as different stress conditions, broccoli developed in soilless culture in the greenhouse was analysed for biologically active phytochemicals (glucosinolates, caffeoyl‐quinic, ferulic and sinapic derivatives and vitamin C). RESULTS: The application of elicitors during head formation could be beneficial for the enrichment in phytochemicals in broccoli. Management practices for increasing a given phytochemical (e.g., glucoraphanin or glucobrassicin) may be related to a decreased level of natural antioxidants (hydroxycinnamic acids). Growing broccoli hydroponically in the greenhouse in winter (Mediterranean climate) needs the supporting treatment of abiotic stress during development (i.e., NaCl, elicitors). CONCLUSION: The use of hydroponic growth conditions for broccoli and the application of stress factors (elicitors) at head induction and during development may serve the purpose of enhancing its nutritional quality to deliver a health‐promoting food. Copyright © 2008 Society of Chemical Industry     

Structural and adhesion properties of poly(ethyl 2-cyanoacrylate) post-cured at different temperatures and times

The structure and properties of poly(ethyl 2-cyanoacrylate)s (pECNs) cured at 25?°C during 24?hours, and post-cured at different temperatures (45-90?°C) and times (2-6?hours) were studied. Irrespective of the post-cure conditions, pECN was not fully polymerized and two different structures of different molecular weights and topographies were obtained. The post-cure decreased the shear strength values in joints made with aluminum and ethyl cyanoacrylate due to the decrease in the percentage of higher molecular weight polymeric chains and the formation of new short polymeric chains by unzipping de-polymerization mechanism, both contributed to decrease the mechanical properties. On the other hand, the post-cure changed the morphology of pECN because of nano-spheres were produced by curing at 25?°C which were not present after post-cure at 90?°C.     

Temperature stimuli-responsive nanoparticles from chitosan-graft-poly(N-vinylcaprolactam) as a drug delivery system

This work describes the preparation of thermosensitive chitosan-graft-poly(N-vinylcaprolactam) nanoparticles by ionic gelation and their potential use as a controlled drug delivery system, using doxorubicin as a model drug. A systematic study of the effect of the main processing parameters on both the size and thermoresponsive behavior of nanoparticles was investigated. The size of the particles is strongly dependent on the length of the poly(N-vinylcaprolactam) grafted chains and the concentration of the copolymer and crosslinking agent solutions. The molecular structure of the copolymer plays an essential role in the phase transition temperature of the particles, which decreases with the length of PVCL grafted chain. The system displayed proper drug-association parameters, and the drug-loaded nanoparticles exhibited dose-dependent cytotoxicity. A significant increase in the doxorubicin delivery rate was observed above the phase transition temperature (40 °C). These features indicate that these nanoparticles are suitable for the development of a new thermally controlled anti-cancer drug delivery system. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47831.     

Supply chain networks servicing upstream operations in oil and gas fields after the shale revolution

The recent irruption of shale resources in the oil and gas (O&G) industry has dramatically changed the paradigm for managing upstream operations. Unconventional production is largely driven by drilling new wells, yielding a much larger scale of material and service flows that need to be efficiently planned. This article presents an optimization framework for the design of integrated supply chain networks (SCNs) servicing upstream operations. Novel aspects addressed in this work are the integrated planning of material and service supplies; the economies of scale in operating, transportation and capital expenditures; the concept of waiting cost to quantify production losses; and the reverse flow of materials within closed-loop supply chains. The merits of the proposed approach are assessed through real-world case studies from the Argentine O&G industry. Optimal designs yield significant cost savings and confirm that the integrated planning of the SCN is critical for O&G operators after the shale revolution.     

Molecular epidemiology and distribution of antimicrobial resistance genes of Staphylococcus species isolated from Chinese dairy cows with clinical mastitis

Staphylococcus species, categorized into Staphylococcus aureus and non-aureus staphylococci (NAS), are frequent causes of mastitis in dairy cattle around the world. Current treatments using antimicrobials are under increasing scrutiny due to rising prevalence of multi-drug resistance in S. aureus. Objectives of this study were to determine: (1) genetic diversity of Staphylococcus species isolated from clinical mastitis in cows from large Chinese dairy farms; and (2) prevalence and distribution of antimicrobial resistance genes (ARG) in these isolates. Staphylococcus aureus (n = 96) were isolated from 26 herds located in 12 provinces of China, whereas NAS (n = 112) were isolated from 59 herds located in 18 provinces of China. The NAS were identified at the species level using a partial 16S rRNA sequencing method, whereas random amplification of polymorphic DNA (RAPD) PCR was done to determine genetic relationships of isolates. Finally, PCR was used to detect resistance and biofilm formation genes. Staphylococcus chromogenes (33%) was the most common NAS species, followed by Staphylococcus sciuri (17%) and Staphylococcus epidermidis (8%). Staphylococcus aureus was grouped in 12 genotypes, of which 2 types represented 56% of isolates. Staphylococcus chromogenes (n = 37) clustered into 8 RAPD types, with 2 prevalent types containing 73% of isolates. The most prevalent ARG in S. aureus isolates was blaZ (95%), followed by tetM (33%), tetK (31%), ermT (26%), and aacA-aphD (23%). The mecA and vanA were detected in 16 and 4% of isolates, respectively. In NAS, blaZ (100%), mecA (73%), tetK (79%), tetM (96%), mphC (63%), and msrA (54%) were frequently detected. Antimicrobial resistance genes mecA, tetK, tetL, tetM, dfrG, ermB, msrA, mphC, aadD, and aphA3 were more commonly detected in NAS than in S. aureus. Biofilm formation genes (icaA and icaD) were frequently detected in staphylococci isolated from bovine clinical mastitis. The existence of predominant RAPD types in S. aureus and S. chromogenes isolates across Chinese dairy farms indicated that specific genotypes had disseminated within herds and become more udder-adapted. High prevalence of ARG, especially in NAS, highlighted the risk of selection of multi-drug resistant staphylococci with potential as a reservoir of ARG.     

Antimicrobial resistance profiles of 5 common bovine mastitis pathogens in large Chinese dairy herds

The prevalence of antimicrobial resistance (AMR) is increasing in human and animal pathogens, becoming a concern worldwide. However, prevalence and characteristics of AMR of bovine mastitis pathogens in large Chinese dairy herds are still unclear. Therefore, our objective was to determine the AMR profile of bacteria isolated from clinical mastitis in large (>500 cows) Chinese dairy herds. A total of 541 isolates of the 5 most common species, Staphylococcus aureus (n = 103), non-aureus staphylococci (NAS; n = 107), Streptococcus species (n = 101), Klebsiella species (n = 130), and Escherichia coli (n = 100), isolated from bovine clinical mastitis on 45 dairy farms located in 10 provinces of China were included. Presence of AMR was determined by minimum inhibitory concentrations using the microdilution method. Prevalence of multidrug resistance (resistance to >2 antimicrobials) was 27% (148/541). A very wide distribution of minimum inhibitory concentrations was screened in all isolates, including Staph. aureus isolates, which were resistant to penicillin (66%). In addition, NAS (30%) were more resistant than Staph. aureus to oxacillin (84%), penicillin (62%), tetracycline (34%), and clindamycin (33%). Prevalence of resistance to tetracycline was high (59%) in Streptococcus spp. Additionally, prevalence of resistance of both E. coli and Klebsiella spp. was high to amoxicillin/clavulanate potassium (81 and 38%, respectively), followed by tetracycline (only Klebsiella spp. 32%). A high proportion (27%) of isolates were multidrug resistant; the most frequent combinations were clindamycin-cefalexin-tetracycline or enrofloxacin-cefalexin-penicillin patterns for Staph. aureus; enrofloxacin-oxacillin-penicillin-tetracycline patterns for NAS; clindamycin-enrofloxacin-tetracycline patterns for Streptococcus spp.; amoxicillin/clavulanate potassium-ceftiofur-polymyxin B patterns for Klebsiella spp.; and amoxicillin/clavulanate potassium-ceftiofur-polymyxin B patterns for E. coli. Resistance for 4 kinds of antimicrobials highly critical for human medicine, including daptomycin, vancomycin, imipenem, and polymyxin B, ranged from 0 to 24%. In conclusion, prevalence of AMR in mastitis pathogens was high on large Chinese dairy farms, potentially jeopardizing both antimicrobial efficacy and public health. Results of this study highlighted the need for improvements in antimicrobial stewardship and infection control programs in large Chinese dairy farms to reduce emergence of AMR.